| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 1900 x 800 x 820 mm | |
|---|---|---|
| Single armchair overall dimensions | 780 x 750 x 820 mm | |
| Large coffee table overall dimensions | 1200 x 650 x 450 mm | |
| Side end table overall dimensions | 650 x 650 x 520 mm | |
| Seat height from floor | 430 mm | |
| Seat depth for all seating units | 500 mm | |
| Seat back height for all seating units | 420 mm | |
| Armrest height from seat surface | 220 mm | |
| Large coffee table lower shelf height from floor | 100 mm | |
| Chrome tubing diameter for frames | 25 mm | |
| Seat width per single seating position | 600 mm | |
| Side end table lower shelf height from floor | 120 mm | |
| Clear glass tabletop thickness | 10 mm | |
| Black lower shelf glass thickness | 8 mm | |
| Armrest upholstered pad width | 80 mm | |
| Finished Seat Cushion Thickness | 90 mm |
Net weight / load capacity / users / durability
| 3-seater sofa weight | 48 kg | |
|---|---|---|
| Single armchair weight per unit | 18 kg | |
| Large coffee table weight | 38 kg | |
| Side end table weight | 22 kg | |
| Seating static load capacity per seat position | 150 kg | |
| Recommended maximum simultaneous users for full set | 5 people | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Frame weld joint static load rating | 300 kg | |
| Seating frame flex fatigue cycle rating | 20000 cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | 0.9mm thick black polyurethane faux leather | |
|---|---|---|
| Seat cushion padding | 40mm thick 35kg/m³ high-density polyurethane foam | |
| Backrest padding | 30mm thick 30kg/m³ high-density polyurethane foam | |
| Structural frame | 1.2mm thick polished chrome-plated mild steel tubing | |
| Coffee/side table tops | 10mm thick clear tempered glass | |
| Large coffee table lower shelf | 8mm thick black tempered glass | |
| Frame protective end caps | Injection-molded black plastic floor glides | |
| Frame joint hardware | Chrome-plated steel bolt and nut fasteners | |
| Armrest top padding | 15mm thick 28kg/m³ polyurethane foam wrapped in matching black faux leather | |
| Side end table lower shelf | 8mm thick black tempered glass | |
| Upholstery seam stitching | Bonded polyester thread with 6mm stitch pitch | |
| Frame-to-glass mounting pads | 3mm thick transparent silicone rubber pads |
Adjustment / rotation / tilt / mobility / storage features
| Cantilever seating design | Continuous bent steel frame provides gentle flex without tilting mechanisms, delivering consistent support for short-term visitor seating | |
|---|---|---|
| Integrated fixed armrests | Padded black armrest tops mounted directly to the steel frame provide stable arm support with no height or angle adjustment | |
| Two-tier coffee table storage | Clear top surface for serving and decor, lower black glass shelf for concealed storage of reading materials and accessories | |
| Fixed non-adjustable seating geometry | All seat and back angles are factory-set to 105 degrees for relaxed upright posture suitable for reception conversations | |
| Floor protection glides | Hard plastic glides on all frame contact points prevent scratching of hard tile, wood or carpeted reception floors | |
| Modular set arrangement | All pieces are freestanding to allow flexible layout in 1+3+1 conversation clusters, linear arrangements, or separate seating zones | |
| Water-resistant upholstery surface | Smooth faux leather surface allows wipe-clean maintenance for spills and regular office cleaning | |
| Side table auxiliary placement | Side end tables with 520mm height are sized to hold water bottles, brochures and table lamps adjacent to seating positions, with 15kg load capacity per shelf | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Total number of shipping cartons | 6 cartons | |
|---|---|---|
| Largest carton dimensions (3-seater sofa) | 1950 x 850 x 450 mm | |
| Total shipment gross weight | 155 kg | |
| Total shipment volume | 1.8 CBM | |
| On-site assembly time | 60 minutes | |
| 20ft GP container loading quantity | 22 sets | |
| 40ft HQ container loading quantity | 54 sets | |
| Packaging material specification | 50mm thick EPE foam wrap plus 5-layer corrugated carton, with corner protectors for glass components | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for visitor waiting zones, lobbies and front office areas where professional, durable seating for guests is required | |
|---|---|---|
| Small business meeting and waiting spaces | Fits 5 people comfortably for informal client discussions or short meetings without requiring large conference room space | |
| Public institution waiting rooms | Durable wipe-clean materials stand up to medium daily traffic in government, bank or service center waiting areas | |
| Open plan office casual collaboration zones | Provides flexible informal seating for quick team check-ins or informal work breaks | |
| Recommended companion rug size | 2000 x 2500 mm low-pile commercial rug to place under the central coffee table for noise reduction and floor protection | |
| Medical clinic waiting areas | Wipeable non-porous upholstery meets basic hygiene requirements for low-risk healthcare waiting spaces with daily sanitization needs | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Office visitor chair stability recommendation | EN 1335:2009 Office furniture - Office work chair - Part 3: Safety test methods, applicable as reference for static load and stability verification of seating units | |
|---|---|---|
| Glass furniture safety recommendation | EN 12150:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description, applicable for table glass safety verification | |
| Upholstery furniture fire safety recommendation | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, applicable for reception seating fire safety | |
| Metal furniture surface finish recommendation | EN 13722:2004 Furniture - Test methods for the assessment of the resistance of surfaces to abrasion, applicable for chrome frame finish durability verification |
US and Canada office-furniture standards
| Lounge seating performance recommendation | ANSI/BIFMA X2020 Lounge and Public Seating, applicable as reference for static load, durability and stability verification of all seating units | |
|---|---|---|
| Occasional table performance recommendation | ANSI/BIFMA X2021 Desk Products, applicable as reference for table load capacity, stability and glass safety verification |
Standards applicable to China-market projects
| Seating structural durability recommendation | GB/T 3324 General technical requirements for wooden furniture, applicable as reference for seating structural stability and finish quality for domestic Chinese procurement | |
|---|---|---|
| Glass table safety recommendation | GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass, applicable for verifying tempered glass strength and break safety for all table tops | |
| Upholstered furniture harmful substance limit recommendation | GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal content verification | |
| Metal furniture coating durability recommendation | GB/T 3325 Metal furniture general technical requirements, applicable for verifying chrome frame adhesion, corrosion resistance and finish durability |
This product must meet the following technical requirements: 1. Seating structural durability recommendation: GB/T 3324 General technical requirements for wooden furniture, applicable as reference for seating structural stability and finish quality for domestic Chinese procurement; 2. Glass table safety recommendation: GB 15763.2 Safety glazing materials in building - Part 2: Tempered glass, applicable for verifying tempered glass strength and break safety for all table tops; 3. Upholstered furniture harmful substance limit recommendation: GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal content verification; 4. Metal furniture coating durability recommendation: GB/T 3325 Metal furniture general technical requirements, applicable for verifying chrome frame adhesion, corrosion resistance and finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
