| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seat sofa overall dimensions | 2100 x 880 x 850 mm | |
|---|---|---|
| Two-seat sofa overall dimensions | 1600 x 880 x 850 mm | |
| Single-seat armchair overall dimensions | 950 x 880 x 850 mm | |
| Seat height from floor | 420 mm | |
| Seat cushion depth | 580 mm | |
| Backrest total height | 450 mm | |
| Armrest height from seat surface | 200 mm | |
| Armrest width | 120 mm | |
| Clearance under sofa frame | 50 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest padding thickness | 100 mm | |
| Wall clearance required behind units | 100 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Three-seat sofa net weight | 65 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Total seating capacity for full set | 6 persons | |
| Seat foam density | 40 kg/m³ | |
| Back foam density | 30 kg/m³ | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Seam tensile strength | 120 N | |
| Frame joint static load rating | 300 kg per seat | |
| Total sofa set seating capacity | 6 persons | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Black matte faux leather (PU leather) | |
|---|---|---|
| Seat cushion padding | High-density polyurethane foam | |
| Backrest padding | Medium-density polyurethane foam | |
| Armrest padding | Wrapped high-density foam over rigid frame | |
| Internal load-bearing frame | Kiln-dried solid wood + engineered wood panel | |
| Seat support base | Sinuous steel spring support system | |
| Support feet | Black injection-molded plastic glide feet | |
| Upholstery stitching | Bonded polyester thread with 8mm seam pitch | |
| Back panel lining | Black non-woven fabric dust cover | |
| Sofa outer upholstery | Black matte PU faux leather, 1.2mm thickness | |
| Sofa seat cushion padding | 40kg/m³ high-density polyurethane foam, 120mm thickness | |
| Sofa backrest padding | 30kg/m³ medium-density polyurethane foam, 100mm thickness |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed modular 3+2+1 layout | |
|---|---|---|
| Back support design | Fixed upright backrest angle of 105 degrees | |
| Armrest function | Fully padded fixed armrests on both sides of each unit | |
| Cleaning access function | 50mm floor clearance under all units | |
| Floor protection function | Smooth non-marking glide feet on all base corners | |
| Seating stability function | Fixed non-swivel, non-rocking frame structure | |
| Arrangement flexibility | Independent freestanding units | |
| Upholstery maintenance | Smooth non-porous upholstery surface | |
| Coffee table storage function | 2 side drawers plus full-width open lower shelf | |
| Coffee table leveling function | Adjustable rubber glide feet on all four table corners | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Full set packaging quantity | 3 cartons | |
|---|---|---|
| Three-seat sofa carton dimensions | 2150 x 930 x 680 mm | |
| Two-seat sofa carton dimensions | 1650 x 930 x 680 mm | |
| Single-seat armchair carton dimensions | 1000 x 930 x 680 mm | |
| Full set total gross shipping weight | 170 kg | |
| Full set total shipping volume | 2.42 CBM | |
| Assembly time per unit | 10 minutes | |
| Full set assembly time | 30 minutes | |
| 40ft HQ container loading capacity | 35 full sets | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal black professional silhouette suits executive office visitor waiting zones, projecting a serious business image for client meetings | |
|---|---|---|
| Corporate lobby waiting areas | Durable upholstery and stable frame suitable for high-traffic main lobby seating for visiting guests and job candidates | |
| Conference room breakout zones | Upright supportive seating suitable for informal breakout discussions adjacent to formal meeting spaces | |
| Government and institutional meeting spaces | Conservative formal design matches standard government and institutional office aesthetic requirements for official meeting rooms | |
| Small business visitor areas | Modular flexible arrangement allows configuration to fit small office footprints without requiring custom furniture | |
| Recommended pairing furniture | Pairs with matching black frame office coffee tables and side tables for a cohesive coordinated reception space | |
| Cleaning suitability | Smooth non-porous upholstery is suitable for daily cleaning in high-traffic areas with regular janitorial maintenance | |
| Corporate main lobby waiting areas | 50000 Martindale abrasion-resistant upholstery and stable frame suitable for high-traffic main lobby seating for visiting guests, job candidates and vendor representatives |
EU Market Access Requirements* EN Standards
| Office furniture safety recommendation | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
|---|---|---|
| Upholstered furniture flammability recommendation | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | |
| Formaldehyde emission recommendation | EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking | |
| Surface durability recommendation | EN 14465:2003 Textiles - Upholstery fabrics - Specification and test methods | |
| Non-domestic seating strength and safety | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| Upholstered furniture ignitability | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
US and Canada office-furniture standards
| Office seating durability recommendation | ANSI/BIFMA X2021 Lounge and Public Seating | |
|---|---|---|
| Stability recommendation | ANSI/BIFMA X2021 Clause 7 Stability | |
| Component durability recommendation | ANSI/BIFMA X2021 Clause 8 Durability | |
| Lounge seating performance | ANSI/BIFMA X2022 Lounge and Public Seating | |
| Lounge seating stability | ANSI/BIFMA X2022 Clause 7 Stability | |
| Lounge seating durability | ANSI/BIFMA X2022 Clause 8 Durability |
Standards applicable to China-market projects
| General safety recommendation | GB/T 3324 General technical requirements for wooden furniture | |
|---|---|---|
| Upholstered furniture flammability recommendation | GB 20286 Flame retardant requirements and mark for public place furniture and components | |
| Upholstered furniture performance recommendation | GB/T 39028 Upholstered furniture for office use | |
| Formaldehyde emission recommendation | Recommended references: GB 18584 | |
| Wooden furniture general safety | GB/T 3324 General technical requirements for wooden furniture | |
| Public place furniture flammability | GB 20286 Flame retardant requirements and mark for public place furniture and components |
This product must meet the following technical requirements: 1. General safety recommendation: GB/T 3324 General technical requirements for wooden furniture; 2. Upholstered furniture flammability recommendation: GB 20286 Flame retardant requirements and mark for public place furniture and components; 3. Upholstered furniture performance recommendation: GB/T 39028 Upholstered furniture for office use; 4. Formaldehyde emission recommendation: Recommended references: GB 18584; 5. Wooden furniture general safety: GB/T 3324 General technical requirements for wooden furniture; 6. Public place furniture flammability: GB 20286 Flame retardant requirements and mark for public place furniture and components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
