| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 2100 x 850 x 820 mm | |
|---|---|---|
| 2-seater loveseat overall dimensions | 1600 x 850 x 820 mm | |
| Single armchair overall dimensions | 900 x 850 x 820 mm | |
| Coffee table overall dimensions | 1300 x 700 x 450 mm | |
| Seat height from floor | 420 mm | |
| Seat depth | 550 mm | |
| Backrest height above seat | 400 mm | |
| Armrest height from seat | 180 mm | |
| Armrest width | 150 mm | |
| Clearance under sofa frame | 80 mm | |
| Coffee table lower shelf height from floor | 120 mm | |
| Chrome support leg diameter for sofas | 50 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| 3-seater sofa net weight | 75 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Total set seating capacity | 6 persons | |
| Upholstery abrasion resistance | 50000 cycles | |
| Foam compression set resistance | 35 kPa | |
| Chrome frame rust resistance service life | 5 years | |
| Chrome finish rust resistance service life | 5 years | |
| Seam tensile strength | 120 N | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | 1.2mm thick black matte faux leather (PU) | |
|---|---|---|
| Seat cushion core | 40mm thick 40kg/m³ high-density polyurethane foam | |
| Backrest cushion core | 30mm thick 35kg/m³ high-density polyurethane foam | |
| Internal sofa frame | 20mm thick kiln-dried engineered wood frame with reinforced corner blocks | |
| Sofa support legs | Chrome-plated polished steel cylindrical legs, 1.5mm wall thickness | |
| Coffee table top surface | 10mm thick tempered black glass with polished edge | |
| Coffee table lower shelf | 8mm thick black tempered glass | |
| Coffee table support frame | Polished chrome-plated stainless steel curved frame, 1.2mm wall thickness | |
| Armrest construction | Padded upholstered armrests with matching faux leather wrap over engineered wood substrate | |
| Seam stitching | Nylon bonded thread with 8 stitches per 30mm seam pitch | |
| Leg base glides | 10mm diameter non-marking PP plastic glides pre-fitted to all leg contact points | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed configuration 3-seat sofa + 2-seat loveseat + 1-seat armchair, no modular reconnection | |
|---|---|---|
| Cushion design | Fixed non-removable seat and back cushions, stitched in place for high-traffic commercial use | |
| Leg design | Floor-protecting chrome legs with integrated non-marking plastic glides, no adjustment function | |
| Coffee table storage | Two-tier storage design with upper glass top for beverage service and lower glass shelf for magazine/accessory storage | |
| Coffee table structural support | Curved side frame panels provide full perimeter support for both glass surfaces, cross-brace under top prevents glass deflection | |
| Cleaning compatibility | Smooth non-porous faux leather surface supports wipe-clean sanitization for high-traffic office environments | |
| Arrangement flexibility | Freestanding units support U-shape, L-shape or linear reception area layout per space requirements | |
| Floor protection | All leg bottoms have pre-installed felt glides to prevent scratching wood or tile flooring | |
| Sofa leg design | Cantilever chrome sled base with integrated non-marking plastic glides, no height adjustment function | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 6 | |
|---|---|---|
| 3-seater sofa carton dimensions | 2150 x 900 x 650 mm | |
| 2-seater loveseat carton dimensions | 1650 x 900 x 650 mm | |
| Single armchair carton dimensions | 950 x 900 x 650 mm | |
| Coffee table carton dimensions (combined) | 1350 x 750 x 250 mm | |
| Total shipment gross weight | 255 kg | |
| Total shipment volume | 2.9 CBM | |
| On-site assembly time | 30 minutes | |
| 40HQ container loading capacity | 32 sets | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for front-of-house visitor waiting zones, provides formal durable seating for guest greeting | |
|---|---|---|
| Executive office meeting zones | Suitable for placement in private executive offices for small group discussions, supports 6-person casual meetings | |
| Government and institution waiting rooms | Suitable for public sector service halls and waiting areas, meets high-traffic durability and easy cleaning requirements | |
| Small business conference lounge areas | Suitable for break rooms and informal meeting spaces adjacent to open plan offices, pairs with matching coffee table for beverage service | |
| Hotel business center waiting zones | Suitable for hotel lobby business centers and VIP reception rooms, coordinates with neutral modern interior finishes | |
| Recommended matching configuration | Pair with 2 additional matching side tables for corner placement to complete full reception area furnishing | |
| Recommended expanded configuration | Pair with 2 additional 500x500mm matching side tables for corner placement to complete full reception area furnishing |
EU Market Access Requirements* EN Standards
| Office furniture stability recommendation | EN 1022:2018 Domestic furniture - Seating - Determination of stability, applicable for seating unit tip-over resistance verification | |
|---|---|---|
| Upholstered furniture flammability recommendation | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, applicable for fire safety verification | |
| Glass furniture safety recommendation | EN 12150:2015 Glass in building - Thermally toughened soda lime silicate safety glass, applicable for coffee table glass safety performance verification | |
| Seating stability standard | EN 1022:2018 Domestic furniture - Seating - Determination of stability, applicable for seating unit tip-over resistance verification | |
| Upholstery ignitability standard | EN 1021:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, applicable for fire safety verification | |
| Tempered glass safety standard | EN 12150:2015 Glass in building - Thermally toughened soda lime silicate safety glass, applicable for coffee table glass safety performance verification |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| Upholstered furniture safety recommendation | GB/T 3324General technical requirements for wooden furniture, applicable for frame structural stability verification | |
|---|---|---|
| Formaldehyde emission recommendation | GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal content verification | |
| Leather upholstery recommendation | GB/T 16799Polyurethane leather for furniture, applicable for faux leather abrasion and colorfastness verification | |
| Tempered glass safety recommendation | GB 15763.2Safety glazing materials in building - Part 2: Tempered glass, applicable for coffee table glass impact resistance verification | |
| Wooden furniture general technical requirement | GB/T 3324:2017 General technical requirements for wooden furniture, applicable for frame structural stability verification | |
| Wood furniture harmful substance limit | GB 18584:2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal content verification |
This product must meet the following technical requirements: 1. Upholstered furniture safety recommendation: GB/T 3324General technical requirements for wooden furniture, applicable for frame structural stability verification; 2. Formaldehyde emission recommendation: GB 18584Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal content verification; 3. Leather upholstery recommendation: GB/T 16799Polyurethane leather for furniture, applicable for faux leather abrasion and colorfastness verification; 4. Tempered glass safety recommendation: GB 15763.2Safety glazing materials in building - Part 2: Tempered glass, applicable for coffee table glass impact resistance verification; 5. Wooden furniture general technical requirement: GB/T 3324:2017 General technical requirements for wooden furniture, applicable for frame structural stability verification; 6. Wood furniture harmful substance limit: GB 18584:2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal content verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
