| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1750 x 650 x 800 mm | |
|---|---|---|
| Single seat width | 500 mm | |
| Seat depth | 400 mm | |
| Seat height from floor | 450 mm | |
| Backrest height | 400 mm | |
| Backrest thickness (formed panel) | 20 mm | |
| Armrest height from seat surface | 220 mm | |
| Support leg spread width | 1600 mm | |
| Floor pad diameter | 50 mm | |
| Armrest diameter (tubing) | 25 mm | |
| Seat panel thickness | 1.2 mm | |
| Perforation diameter (back panel) | 5 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Product net weight range | 28 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Maximum number of seated users | 3 | |
| Seat edge static impact resistance | 45 kg drop from 300mm height | |
| Frame connection static load endurance | 20000 cycles of 100kg per seat | |
| Corrosion resistance suitability | Indoor and semi-outdoor covered use | |
| Floor load distribution | Equalized across 4 support legs | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat panels | 1.2mm thick 201 stainless steel sheet with polished finish and rounded rolled front edge | |
|---|---|---|
| Backrest panels | 1.0mm thick 201 stainless steel perforated sheet with uniform 5mm round holes, reinforced formed perimeter edges | |
| Main support beam | 2.0mm thick rectangular stainless steel tube running full bench length under seats, welded to seat supports | |
| Support legs | 2.5mm thick formed stainless steel Y-spider legs, welded to main beam with integral floor glide mounts | |
| Armrests | 25mm diameter polished stainless steel round tube, bent to ergonomic curve, welded to side seat frames | |
| Floor glides | Stainless steel adjustable threaded glides with non-marring rubber contact pads | |
| Seat/back partitions | 1.5mm thick formed stainless steel dividers between each seat, separating individual seating positions | |
| Surface finish | No.4 brushed stainless steel finish across all components, no applied coating or upholstery | |
| Hardware and fasteners | All-stainless steel welded construction at primary joints, no exposed ferrous fasteners | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Fixed non-reclining seating configuration | All seats and backrests are permanently mounted to the main support beam at a fixed 105 degree seat-to-back angle, no adjustment mechanisms | |
|---|---|---|
| Integrated end armrests | Curved polished armrests fitted at both extreme ends of the 3-seat bench, providing arm support for outermost users and defined bench boundaries | |
| Perforated back ventilation | Full-perforation backrest panels allow constant air circulation between user and backrest, reducing heat buildup during extended waiting periods | |
| Adjustable floor leveling | Threaded adjustable glides at the base of each 4 support legs rotate to compensate for 10mm of uneven floor height, eliminating bench rock when installed on tile or concrete surfaces | |
| Fixed individual seat separation | Vertical stainless steel dividers between each adjacent seat define clear 500mm wide individual seating positions, discouraging overcrowding and improving personal space for waiting users | |
| Sanitization-compatible design | Smooth, non-porous all-stainless steel surfaces with no fabric, seams or recessed crevices allow full wipe-down disinfection with standard hospital-grade cleaning agents | |
| Fixed floor-ready installation | Bench is delivered as a single fully welded integrated unit, requiring no assembly of seat or back components, only placement and glide leveling before use | |
| Anti-tip structural design | Splayed 4-point spider leg geometry extends beyond the seat perimeter, with a wide support base that prevents forward or sideways tipping even under uneven user loading | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 unit | |
|---|---|---|
| Shipping carton dimensions | 1800 x 700 x 500 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume per unit (CBM) | 0.63 cbm | |
| On-site assembly time | 10 minutes | |
| 20ft GP container loading quantity | 42 units | |
| 40ft HQ container loading quantity | 105 units | |
| Protective packaging materials | 50mm EPE foam wrap on all metal surfaces, corrugated cardboard corner protectors, stretch wrap over full unit | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Hospital clinic waiting areas | All-stainless steel construction withstands frequent sanitization, heavy daily use, and exposure to medical cleaning chemicals, ideal for high-turnover patient waiting zones | |
|---|---|---|
| Airport, rail and bus terminal waiting halls | Heavy-duty rigid construction supports continuous heavy passenger traffic, perforated backs remain comfortable for extended waiting periods, and non-upholstered surfaces resist staining from luggage or food spills | |
| Government service hall and bank queuing areas | Defined 3-seat configuration provides orderly, durable seating for citizens and customers, easy to maintain between service peaks, and neutral metallic finish matches formal public interior design | |
| Outpatient and emergency department public corridors | Non-porous seamless construction allows rapid disinfection between users, reducing infection risk in high-traffic medical environments with no fabric to trap contaminants | |
| School administration and public lobby areas | Sturdy construction resists rough handling and heavy student use, requires no routine upholstery maintenance, and provides long service life with minimal upkeep | |
| Semi-outdoor covered bus stops and station platforms | Stainless steel material resists humidity and occasional rain exposure under cover, does not rust or degrade from weather exposure in partially protected outdoor locations | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139:2013 Furniture - Strength, durability and safety - Non-domestic seating | Applies as acceptance reference for strength, stability and safety requirements for non-domestic public waiting seating | |
|---|---|---|
| EN 10088-2:2014 Stainless steels - Technical delivery conditions for sheet/plate and strip of corrosion resisting steels | Applies as reference for stainless steel sheet material properties and corrosion resistance requirements for construction components |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for metal furniture | Applies as acceptance reference for dimensional tolerance, welded joint quality, surface finish quality and structural stability of this all-stainless steel public seating unit | |
|---|---|---|
| GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools | Applies as acceptance reference for seat static load, backrest static load, impact resistance and fatigue cycle testing for public use seating | |
| GB/T 24821-2009 Public seating for airport terminals | Applies as reference specification for heavy-duty public gang seating used in high-traffic waiting areas, covering load ratings and safety clearances |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for metal furniture: Applies as acceptance reference for dimensional tolerance, welded joint quality, surface finish quality and structural stability of this all-stainless steel public seating unit; 2. GB/T 10357.3-2013 Test of mechanical properties of furniture - Strength and durability of chairs and stools: Applies as acceptance reference for seat static load, backrest static load, impact resistance and fatigue cycle testing for public use seating; 3. GB/T 24821-2009 Public seating for airport terminals: Applies as reference specification for heavy-duty public gang seating used in high-traffic waiting areas, covering load ratings and safety clearances; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
