| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W x D x H) | 1900 x 750 x 780 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat depth (front edge to back cushion front face) | 580 mm | |
| Seat width per individual position | 560 mm | |
| Backrest height from seat surface | 330 mm | |
| Armrest height from floor | 620 mm | |
| Armrest width (rail cross-section) | 20 mm | |
| Leg height (floor to bottom of seat frame rail) | 300 mm | |
| Leg cross-section dimension | 30 mm | |
| Seat cushion thickness (uncompressed) | 120 mm | |
| Back cushion thickness | 100 mm | |
| Underseat clearance height | 280 mm | |
| Seat Cushion Thickness | 180 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Net product weight | 42 kg | |
|---|---|---|
| Total static load capacity (distributed across seats) | 360 kg | |
| Seat foam density | 40 kg/m³ | |
| Seat foam compression resilience | 42 % | |
| Fabric abrasion resistance (Martindale) | 50000 cycles | |
| Recommended maximum user count | 3 adults | |
| Structural frame static load test rating | 600 kg | |
| Expected structural warranty | 5 years | |
| Cushion thickness (seat, compressed under standard load) | 120 mm | |
| Back foam density | 30 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Primary support frame | 1.8mm thick square steel tube with dark bronze powder coated finish | |
|---|---|---|
| Armrest rails | 20mm square steel tube matching frame finish, welded to leg and seat frame assembly | |
| Legs | Tapered square steel legs with matching bronze finish, fitted with non-marking polymer floor glides | |
| Seat cushion core | High-density polyurethane foam wrapped with 20mm soft polyester fiber batting | |
| Back cushion core | Medium-density polyurethane foam with fiber wrap, fixed to internal back support panel | |
| Upholstery fabric | Woven polyester blend fabric in terracotta color, matte textured finish | |
| Seat support base | 8mm thick plywood panel fixed to steel frame, supporting seat cushions | |
| Fabric seam stitch pitch | 8 stitches per inch | |
| Floor protection components | 5mm thick injection-molded polyethylene glides, fitted to base of each leg | |
| Back support panel | 6mm thick bent plywood panel attached to rear frame rail, securing back cushions | |
| Internal frame welds | Full-penetration fillet welds at all tube joints, ground smooth before powder coating | |
| Fabric fire retardant treatment | Optional NFPA 260 compliant fabric treatment available for commercial hospitality and office installations |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Three separated, fixed seat cushions with matching fixed back cushions, no recline or adjustment mechanisms | |
|---|---|---|
| Arm support | Continuous thin metal arm rails on both left and right sides, integrated directly into the structural frame for rigid arm support | |
| Floor protection | Non-marking glides on all six leg contact points, designed to prevent scratching on hard floor surfaces including wood, tile and polished concrete | |
| Assembly requirement | Knock-down construction with frame sections and cushions shipped separately, requiring bolted assembly of leg and frame components on site | |
| Cleaning access | Cushions are non-removable, requiring on-surface upholstery cleaning per fabric care instructions | |
| Stability design | Six-point leg support (front left, center left, rear left, front right, center right, rear right) for even weight distribution and reduced frame flex on uneven floors | |
| Upholstery color option range | 1 standard terracotta fabric option, with optional custom fabric options available for volume orders | |
| Load distribution | Perimeter steel frame transfers occupant load directly to legs without intermediate cross-braces that would block underseat cleaning access | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 2 | |
|---|---|---|
| Largest package dimensions (L x W x H) | 1950 x 780 x 280 mm | |
| Total shipping gross weight | 48 kg | |
| Total shipping volume (CBM) | 0.58 CBM | |
| On-site assembly time (two people) | 40 minutes | |
| 20ft GP container loading quantity (fully assembled knock-down) | 72 units | |
| 40ft HQ container loading quantity (fully assembled knock-down) | 186 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm |
Recommended spaces / users / usage modes
| Office reception and waiting areas | Sized for three-person seating in corporate lobbies, waiting rooms and visitor zones, with durable construction for regular daily use | |
|---|---|---|
| Open plan office casual lounge zones | Low-profile minimal frame fits collaborative breakout areas, providing upright seating for informal meetings and short breaks | |
| Hotel public areas and lounge spaces | Warm terracotta fabric and refined metal finish suit boutique hotel lobbies, corridor waiting points and guest lounge areas | |
| Residential open-plan living spaces | Slim frame profile works for modern minimalist and industrial style home living rooms, occupying minimal visual space | |
| Co-working space common areas | Robust metal frame and high-wear fabric specification supports high-traffic shared workspaces, with fixed cushions that resist displacement during frequent use | |
| Retail store customer waiting zones | Compact footprint fits small retail checkout waiting areas and fitting room lounges, with easy-to-clean fabric for high-turnover use |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Furniture – Seating – Determination of stability, applicable for static stability verification for domestic and contract lounge seating | |
|---|---|---|
| EN 16139:2013 | Furniture – Strength, durability and safety – Requirements for non-domestic seating, applicable for light-duty contract reception use | |
| EN 13759:2011 | Furniture – Test methods for assessment of surface resistance to cold liquids, applicable for frame finish and fabric stain resistance testing | |
| EN 14465:2003 | Textiles – Upholstery fabrics – Specification and test methods, applicable for fabric strength, abrasion and colorfastness verification |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural strength and finish durability testing of the steel frame | |
|---|---|---|
| GB/T 1952.1-2012 | General technical requirements for upholstered sofas, applicable for cushion performance, structural stability, and upholstery durability testing | |
| GB 18584-2001 | Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture, applicable for formaldehyde emission limits for internal plywood components | |
| GB 20286-2006 | Requirements and mark on burning behavior of fire retarding products and subassemblies in public places, applicable for public area installation fire performance verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural strength and finish durability testing of the steel frame; 2. GB/T 1952.1-2012: General technical requirements for upholstered sofas, applicable for cushion performance, structural stability, and upholstery durability testing; 3. GB 18584-2001: Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture, applicable for formaldehyde emission limits for internal plywood components; 4. GB 20286-2006: Requirements and mark on burning behavior of fire retarding products and subassemblies in public places, applicable for public area installation fire performance verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
