Product supplier3-Seat Tandem Airport Public Waiting Bench with Orange PU Seats, 30 mm thick self-skinning high-density polyurethane, integrated molded
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 768 × 900 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight per 3-seat unit | 45 kg | |
|---|---|---|
| Single seat static load capacity | 250 kg | |
| Sit compression cycle durability | 50000 cycles | |
| Design service life under normal public use | 20 years | |
| Total seating capacity | 3 adults | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and backrest panels | 30 mm thick self-skinning high-density polyurethane, integrated molded | |
|---|---|---|
| Internal seat support frame | 1.2 mm thick welded flat steel tube + 1.0 mm steel plate | |
| End armrests and leg supports | ADC12 die-cast aluminum alloy, anti-oxidation nano-spray finish | |
| Central support beam | 80x90 mm octagonal cold-rolled steel, 3.0 mm wall thickness, anti-rust powder coat | |
| Floor contact glides | Non-slip black rubber/PP composite pads, height-adjustable design | |
| Fastening hardware | Self-locking nuts with spring washers, concealed installation no exposed screws | |
| Beam end caps | Impact-resistant ABS plastic, snap-fit installation to cover sharp beam ends | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seat installation structure | Modular buckle-fixed single seats, individual replacement without full disassembly | |
|---|---|---|
| Floor installation option | Suitable for freestanding placement or fixed anchoring with expansion screws | |
| Surface maintenance feature | Waterproof and stain-resistant PU surface, compatible with disinfectant wiping | |
| Level adjustment | Height-adjustable foot glides to compensate for uneven floor surfaces | |
| Modular expansion capability | Supports adding side tea tables, infusion hooks, or USB ports as accessories | |
| Backrest support | 15° static ergonomic contour for upright waiting posture, no active tilt adjustment | |
| Anti-noise structure | Anti-loosening connections to eliminate abnormal noise during repeated use | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Airport departure/arrival waiting zones | High-traffic durable seating resistant to frequent use and cleaning | |
|---|---|---|
| Hospital outpatient and clinic waiting areas | Disinfectant-compatible surface suitable for medical hygiene requirements | |
| Railway and bus station waiting halls | Rigid frame construction supports heavy public passenger flow | |
| Government service hall waiting zones | Neat uniform appearance and stable structure for long-term public use | |
| Bank and office lobby visitor areas | Ergonomic contoured seats provide comfortable short-term waiting for visitors | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Public seating safety requirements | EN 16139:2013 | |
|---|---|---|
| Furniture surface flame resistance | EN 1021:2014 |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Public seating mechanical safety | GB/T 35660.1 | |
|---|---|---|
| Metal coating corrosion resistance | GB/T 6461Grade 10 | |
| Furniture surface wear resistance | GB/T 17657 | |
| Formaldehyde emission limits | GB 18584 | |
| Metal component salt spray resistance grade | 10 grade |
Standardized tender description text
This product must meet the following technical requirements: 1. Public seating mechanical safety: GB/T 35660.1; 2. Metal coating corrosion resistance: GB/T 6461Grade 10; 3. Furniture surface wear resistance: GB/T 17657; 4. Formaldehyde emission limits: GB 18584; 5. Metal component salt spray resistance grade: 10 grade; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool