| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1780 x 650 x 800 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Single seat width | 520 mm | |
| Seat depth | 480 mm | |
| Backrest height above seat | 380 mm | |
| Armrest height above seat | 220 mm | |
| Leg spread width (base footprint) | 1700 mm | |
| Leg spread depth (base footprint) | 620 mm | |
| Perforated panel thickness | 1.2 mm | |
| Support beam cross-section | 80 x 40 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Product net weight | 28 kg | |
|---|---|---|
| Per-seat static load capacity | 150 kg | |
| Recommended maximum occupancy | 3 adults | |
| Floor glide static load per foot | 115 kg | |
| Seating surface air permeability | High | |
| Recommended warranty for commercial use | 3 years | |
| Floor glide static load per pad | 115 kg | |
| Frame fatigue cycle rating | 100000 cycles | |
| Recommended commercial use warranty | 3 years | |
| Surface abrasion resistance | 1500 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and backrest panels | 201/304 grade brushed stainless steel with diamond perforated mesh | |
|---|---|---|
| Armrests | Polished bent stainless steel tube, 25mm outer diameter, 1.5mm wall thickness | |
| Central support beam | Powder-coated black cold-rolled rectangular steel tube | |
| Leg assemblies | Brushed stainless steel Y-shaped welded frames with 32mm outer diameter tube, 2mm wall thickness | |
| Floor glides | Injection-molded TPE rubber adjustable leveling pads, 50mm diameter | |
| Seat dividers | Curved black rubber or PVC bumpers between adjacent seats | |
| Weld joints | Continuous TIG welds ground to smooth finish at all frame connection points | |
| Surface finish | No.4 brushed satin finish on all stainless steel components | |
| Fasteners | 304 stainless steel hex bolts and lock nuts for assembly connections | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Fixed integrated seating | 3 individual fixed seats connected by a central steel beam, no moving parts, folding mechanisms or adjustable components | |
|---|---|---|
| Perforated surface drainage and ventilation | Diamond pattern perforations across entire backrest and seat panels allow air circulation and liquid drainage, preventing water pooling in outdoor or semi-outdoor installations | |
| Fixed armrest support | Dual end armrests provide lateral support and assist users when standing up or sitting down, no middle armrests to maximize seating flexibility | |
| Leveling floor adjustment | Adjustable rubber glides at each foot can be rotated to compensate for up to 10mm of uneven floor height, eliminating bench wobble | |
| Anti-corrosion construction | All stainless steel seating components resist rust and corrosion from cleaning chemicals, rain and regular disinfecting, suitable for healthcare and transit environments | |
| Stacking disassembly for transport | Bench can be disassembled into seat/back sections, support beam and leg assemblies for compact shipping, requires basic bolted assembly on site | |
| Fixed integrated gang seating | 3 individual fixed seats welded to central steel beam, no moving parts, folding mechanisms or adjustable components, zero routine maintenance for high-traffic use | |
| Perforated ventilation and drainage | Diamond pattern perforations across full seat and backrest panels allow 100% air circulation and liquid drainage, preventing water pooling and heat buildup during extended use | |
| End armrest accessibility support | Curved fixed armrests at both bench ends provide lateral support and 220mm height assist for users when standing or sitting, no intermediate armrests to allow flexible seating for larger users or items | |
| Leveling floor compensation | Threaded adjustable TPE glides at each leg rotate to compensate for 10mm of uneven floor height, eliminating bench wobble without damaging hard floor surfaces | |
| Corrosion-resistant surface performance | Stainless steel seating components resist damage from disinfectant chemicals, rain and regular cleaning, suitable for semi-outdoor and healthcare environments | |
| Knock-down transport design | Bench disassembles into seat/back assembly, support beam and two leg sets for compact shipping, requiring bolted assembly on site with standard hand tools |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 carton | |
|---|---|---|
| Shipping carton dimensions | 1830 x 700 x 200 mm | |
| Gross shipping weight | 32 kg | |
| Shipping volume per unit | 0.26 CBM | |
| Assembly time per unit | 30 minutes | |
| 20ft GP container loading quantity | 105 units | |
| 40ft HQ container loading quantity | 252 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Hospital and clinic waiting areas | Smooth non-porous stainless steel surface tolerates frequent disinfectant cleaning and high daily turnover of patients and visitors, perforated surface prevents heat buildup during long wait times | |
|---|---|---|
| Airport, railway station and bus terminal waiting zones | Heavy-duty welded construction withstands continuous heavy use by high passenger volumes, fixed design prevents theft or repositioning by members of the public, corrosion-resistant finish works in semi-outdoor terminal areas | |
| Bank, government service hall and office reception waiting areas | Neutral metallic finish complements modern public interior design, fixed individual seat positions maintain orderly queuing and seating arrangements, armrests provide accessibility support for elderly users | |
| Outdoor covered public spaces: bus stops, park pavilions and building entrance lobbies | Stainless steel construction resists rain damage and temperature fluctuations, perforated seats drain rainwater quickly without pooling, rubber glides protect hard pavement surfaces | |
| Temporary event and vaccination site seating | Lightweight modular design allows rapid deployment and reconfiguration, smooth surfaces can be quickly sanitized between users, no upholstery to trap dirt or contaminants | |
| Transit terminal waiting zones: airports, railway stations, bus terminals | Heavy-duty welded construction withstands continuous high passenger volume use, fixed design prevents unauthorized repositioning or theft, corrosion-resistant finish performs in semi-outdoor terminal areas | |
| Public service waiting areas: banks, government halls, office receptions | Neutral brushed metallic finish complements modern public interior design, defined seat positions maintain orderly seating arrangements, end armrests provide accessibility support for elderly and disabled users | |
| Covered outdoor public spaces: bus stops, park pavilions, building entrances | Stainless steel construction resists rain damage and temperature fluctuations, perforated seats drain rainwater immediately without pooling, TPE glides protect concrete and tile pavement surfaces |
EU Market Access Requirements* EN Standards
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable for public waiting area furniture load and stability requirements | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable for verifying bench does not tip under normal seating and user movement loads |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for dimensional tolerances, weld quality and finish acceptance of this stainless steel waiting bench | |
|---|---|---|
| GB/T 10357.2-2013 | Test method for furniture mechanical properties: chairs and stools, applicable for static load and fatigue testing of seat, backrest and armrests | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for limit of heavy metal release from metal components and paint finishes for indoor installation | |
| GB/T 10357.3-2013 | Test method for furniture mechanical properties: chairs and stools backrest strength test, applicable for verifying backrest load resistance for public use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for dimensional tolerances, weld quality and finish acceptance of this stainless steel waiting bench; 2. GB/T 10357.2-2013: Test method for furniture mechanical properties: chairs and stools, applicable for static load and fatigue testing of seat, backrest and armrests; 3. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for limit of heavy metal release from metal components and paint finishes for indoor installation; 4. GB/T 10357.3-2013: Test method for furniture mechanical properties: chairs and stools backrest strength test, applicable for verifying backrest load resistance for public use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
