Product supplierHigh-Back Gray Mesh Ergonomic Task Chair with Headrest, Gray flexible woven mesh stretched over a black perimeter frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 670 × 680 × 1280 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 150 kg | |
|---|---|---|
| Chair net weight | 19.5 kg | |
| Seat foam thickness | 65 mm | |
| Seat foam density | 45 kg/m3 | |
| Back mesh tensile load | 120 kg | |
| Gas-lift cycle life | 100000 cycles | |
| Caster rolling durability | 100000 cycles | |
| Seat static load test target | 1020 kg | |
| Backrest tilt lock range | 125degrees | |
| Recommended user height | 190 cm |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Gray flexible woven mesh stretched over a black perimeter frame | |
|---|---|---|
| Seat upholstery | Gray woven mesh or mesh-textured fabric over molded foam cushion | |
| Headrest | Gray padded mesh face with black curved plastic or composite rear housing | |
| Armrests | Black injection-molded nylon supports with soft-touch polyurethane or PP pads | |
| Seat mechanism | Black steel synchro-tilt plate enclosed by molded polymer mechanism cover | |
| Base and gas lift | Polished die-cast aluminum five-star base with chrome-plated steel gas cylinder |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Pneumatic lever changes seat height through an 80 mm stroke with 360-degree swivel | |
|---|---|---|
| Recline control | Synchro-tilt mechanism moves seat and back through a 35-degree recline with three lock positions | |
| Armrest adjustment | Height-adjustable arm posts provide 60 mm vertical travel and align the pads at 280 mm above the seat | |
| Mobility and support | Five-star base carries five 60 mm twin-wheel casters and provides 360-degree movement on hard floors |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Export carton dimensions | 680 x 640 x 380 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary workplace use | Suits open-plan offices, home offices and manager workstations requiring 8-hour ergonomic support | |
|---|---|---|
| Flooring and layout fit | Suitable for hard floors and low-pile carpet in 1200 mm-deep work zones |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 suitability | Use office-work-chair dimensional safety requirements to verify seat height, back geometry and stability | |
|---|---|---|
| EN 1335-2 suitability | Use office-work-chair safety requirements for structural integrity and caster performance | |
| EN 1335-3 suitability | Use office-work-chair test methods for static load, fatigue and durability verification |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 suitability | Use the office chair standard for back, seat, base, arm and caster static and durability tests | |
|---|---|---|
| BIFMA e3 suitability | Use furniture sustainability credits for material traceability, recycled aluminum content and low-emission foam when supplier data is available |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 suitability | Apply strength and durability test requirements for the backrest, seat and armrest during procurement inspection | |
|---|---|---|
| GB/T 3324 suitability | Use general technical requirements for wooden furniture only if molded boards or wood-based components appear in the supplier BOM |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 suitability: Apply strength and durability test requirements for the backrest, seat and armrest during procurement inspection; 2. GB/T 3324 suitability: Use general technical requirements for wooden furniture only if molded boards or wood-based components appear in the supplier BOM; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool