Product supplierCoral Red Mesh Mid-Back Swivel Office Chair, Coral red polyester mesh woven over a curved polymer back frame, open grid for airflow
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 630 × 1080 mm | |
|---|---|---|
| Floor-to-top-of-back height | 1080 mm at full lift | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended occupant weight | 120 kg maximum | |
|---|---|---|
| Recommended occupant height | 1850 mm | |
| Gas-lift rated axial load | 150 kg | |
| Five-star base static load | 500 kg for 1 hour | |
| Seat foam indentation load deflection | 45 kg at 25 percent compression | |
| Back mesh tensile rating | 800 N per 50 mm strip | |
| Caster rolling durability | 40 km continuous rolling over hard-floor test surface | |
| Tilt mechanism cyclic durability | 100000 back-rest tilt cycles | |
| Seat height adjustment durability | 100000 up-and-down cycles | |
| Swivel durability | 100000 360-degree rotations |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Coral red polyester mesh woven over a curved polymer back frame, open grid for airflow | |
|---|---|---|
| Seat upholstery | Coral red polyurethane-coated woven fabric or leather-look cover over foam, stitched around rounded front edge | |
| Seat cushion | 70 mm molded polyurethane foam, density 45 kg/m3 and rebound rate 40 percent, bonded to 12 mm plywood seat pan | |
| Back support panel | Flexible tensioned mesh sheet with horizontal lumbar seam and molded polymer perimeter frame | |
| Armrests | One-piece coral red nylon or glass-fiber-reinforced polypropylene loop arms with integral side mounting brackets | |
| Internal back frame | 8 mm molded polypropylene ribbed frame supporting mesh and attaching to steel mechanism |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seat height adjustment | Pneumatic right-side lever raises or lowers seat through 100 mm stroke from 430 to 530 mm | |
|---|---|---|
| 360-degree swivel | Gas-lift bearing permits continuous 360-degree seat and back rotation without detents | |
| Backrest tilt | Steel plate mechanism tilts seat and back together through 14 degrees from upright 95 degrees to reclined 109 degrees | |
| Tilt lock | Single lever locks the recline mechanism in the upright position and one intermediate recline position |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office workstations | use for individual computer tasks at 760 mm desks, with breathable mesh for all-day seated work. | |
|---|---|---|
| Home study or remote-work room | suitable for users weighing up to 120 kg at writing, laptop and monitor tasks on hard floors or low-pile carpet. |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 (R2022) | Office chairs—tests for back strength, seat durability, stability, arm load and base load; recommended acceptance reference, not claimed certification. |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool