Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	650 × 650 × 1030 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight capacity	120 kg
Static seat verification load	700 N
Backrest cyclic tilt test target	120,000 cycles
Caster rolling durability target	100,000 cycles
Base static vertical load target	1130 kg
Seat foam density	45 kg/m3
Seat foam rebound	40%
Fabric abrasion acceptance	50,000 Martindale cycles
Applicable user height	1850 mm
Product net weight	14.5 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Backrest mesh	Blue flexible polyester mesh tensioned in a black molded frame
Back frame	Black injection-molded structural polymer outer frame with molded lumbar contour
Seat upholstery	Blue-gray woven textile over rounded foam cushion with visible stitched perimeter
Seat cushion	80 mm polyurethane foam on a load-bearing molded seat pan
Seat inner support	12 mm molded plywood or reinforced polymer seat pan
Armrest supports	Black fixed polymer T-shaped arms over vertical steel or polymer posts
Arm pads	90 x 60 mm black polymer contact pads with no visible height adjuster
Gas lift	50 mm black steel telescopic gas-lift assembly with polymer telescopic shroud
Mechanism housing	Black steel tilt mechanism under the seat with polymer side covers
Five-star base	Black 650 mm diameter five-star molded base with raised center hub
Casters	Five black 50 mm twin-wheel swivel casters with grip stems
Fasteners and connectors	Steel bolts, cam plates, and locking stem connectors with black protective finish

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seat height adjustment	Pneumatic lift provides 520 mm seat height through a 100 mm stroke under-seat lever
Back tilt movement	Synchronized seat-and-back tilt reclines to 15 degrees for relaxed task posture
Tilt lock	One-position upright lock secures the back at 95 degrees for focused work
Tilt tension control	Knob-style tension adjustment tunes initial back resistance for users up to 120 kg
Mobility	Five 50 mm twin casters provide omnidirectional movement and 360-degree caster swivel
Arm support	Fixed T-arm design provides forearm support but no height, width, or pivot adjustment
Lumbar support	Molded lower mesh zone and rigid frame provide passive lumbar contour without adjustable pad
Breathable back	Open blue mesh supports airflow across the upper and lower back zones
Knockdown assembly	Back, arm set, seat mechanism, gas lift, base, and casters separate for flat carton shipping
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Open-plan workstations	Use at standard 760 mm desks where users need swivel access, mobility, and breathable back support
Home office	Suitable for daily computer work in a compact study or bedroom office due to its 650 mm footprint
Shared hot-desking	Appropriate for shift or hot-desk environments because fixed arms reduce adjustment complexity
Meeting and visitor desks	Suitable for short-to-medium duration meetings at work or collaboration tables
Administrative staff seating	Target users include clerks, coordinators, and operators using computers for up to 8 hours
Hard-floor and low-pile spaces	Recommended for tile, wood, laminate, vinyl, and low-pile carpet with 50 mm twin casters
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1335-1 applicability	Use EN 1335for office-chair dimensional safety and ergonomic measurement basis
EN 1335-2 applicability	Use EN 1335for structural safety requirements including stability and strength
EN 1335-3 applicability	Recommended references: EN 1335
EN 1022 applicability	Use EN 1022 for seating stability verification on level floors

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1 Test 7 applicability	Use Test 7 for static seat load verification at the specified acceptance load

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.3 applicability	Use GB/T 10357.3 for seat and back strength and fatigue acceptance of office chairs
GB/T 3324 applicability	Use GB/T 3324 general wooden-furniture technical requirements if the seat pan is plywood-based
GB/T 2828.1 applicability	Use GB/T 2828.1 for sampling plans during incoming batch inspection

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.3 applicability: Use GB/T 10357.3 for seat and back strength and fatigue acceptance of office chairs;
2. GB/T 3324 applicability: Use GB/T 3324 general wooden-furniture technical requirements if the seat pan is plywood-based;
3. GB/T 2828.1 applicability: Use GB/T 2828.1 for sampling plans during incoming batch inspection;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · UMB-TASK-MESH-BLK-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · UMB-TASK-MESH-BLK-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · UMB-TASK-MESH-BLK-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Mid-Back Blue Mesh Swivel Task Chair with Fixed Arms is an unbranded office task chair designed for practical daily seating in commercial and residential work settings. Its blue flexible polyester mesh back is tensioned within a black injection-molded structural polymer frame, creating a breathable visual surface with a molded lower-back contour. The blue-gray woven textile seat complements the mesh and is finished with a rounded, visibly stitched cushion over polyurethane foam. Black fixed T-shaped armrests, a black gas-lift assembly, and a black five-star base give the chair a functional office appearance while keeping the color palette restrained. The chair is built around a molded load-bearing seat pan, offered in molded plywood or reinforced polymer, with a steel telescopic gas lift and a black steel tilt mechanism beneath the seat. Polymer covers and shrouds provide a clean finish around moving components. The fixed armrests use black polymer supports and contact pads, with no visible height adjuster. Mobility is supported by five nylon twin casters mounted to the five-star base, allowing omnidirectional movement and full caster swivel. For user adjustment, the pneumatic lift is operated by an under-seat lever and sets seat height at 520 mm through a 100 mm stroke. The synchronized seat-and-back tilt reclines to 15 degrees, while a one-position upright lock secures the back at 95 degrees for focused tasks. A knob-style tension control adjusts initial back resistance for users up to 120 kg. The fixed arms provide stable forearm support but do not adjust in height, width, or pivot, and the passive lumbar contour is integrated into the lower mesh zone rather than provided by a movable pad. This model is well suited to open-plan workstations, administrative staff seating, shared hot-desks, meeting areas, and visitor desks, as well as home offices in a compact study or bedroom office. It is intended for standard desks and hard floors or low-pile carpet, including tile, wood, laminate, vinyl, and low-pile carpeting. Procurement teams should note the chair ships as one set in two cartons, with reference assembly time of 40 minutes per set, packaged gross weight of 23 kg, and carton volume of 0.26 cubic meters. The fixed arms simplify shared use but limit personalization, so buyers should assess whether users require adjustable arm support. Overall dimensions are 650 by 650 by 1030 mm, with 540 mm clear width between armrests, a 90 mm finished seat cushion, and 70 mm backrest padding thickness.

Mid-Back Blue Mesh Swivel Task Chair with Fixed Arms Specifications

Suppliers and stock