Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2390 × 430 × 2120 mm
left closed storage section width	800 mm
right open shelving section width	1590 mm
internal closed storage depth	400 mm
open shelf vertical clearance between tiers	330 mm
fluted glass panel tier height	330 mm
open shelf front edge thickness	25 mm
solid door panel thickness	18 mm
back panel thickness	9 mm
rounded top corner radius	50 mm
base plinth height	50 mm
fluted glass panel thickness	8 mm
Carcass Panel Thickness	25 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

total unit static load capacity	57 kg
laminate surface abrasion resistance	2000 cycles
fluted glass panel impact resistance	Tempered grade, 5x impact strength vs annealed glass
LED strip rated operational lifespan	30000 hours
hinge cycle rating for left doors	80000 open/close cycles
edge band peel strength	1.5 N/mm
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles
Anti-tip Fixing Reference	Products above 1200 mm should use at least 2 wall fixing points

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

main carcass	E1 grade medium density fiberboard, 18mm thick, 0.7g/cm³ density
left door panels	Herringbone pattern wood veneer over MDF substrate, matte clear seal finish
open shelf interiors	Matte light grey laminate finish, scratch and stain resistant surface
middle fluted panel	Semi-transparent vertically ribbed (fluted) tempered glass
under-shelf lighting	Recessed linear LED strip lights, warm white 4000K color temperature
shelf dividers	18mm thick matching laminate MDF, dividing right section into asymmetric bays
edge banding	1mm thick PVC edge banding matching door and shelf finish
base plinth	Matching dark wood veneer MDF, full width floor contact support
door hinges	Concealed soft-close steel hinges, nickel plated finish
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

left section storage	Two full-height hinged solid doors enclosing adjustable shelving for concealed document storage
open shelf display	Five tiered asymmetric open shelves split into two bays for displayed items and reference materials
integrated lighting	Recessed under-shelf LED strips illuminate each open shelf tier, hardwired with wall switch control
semi-concealed storage tier	Middle tier fluted glass panel hides stored items while allowing light transmission across both bays
anti-tip safety	Two included wall anchor connectors secure unit to wall to prevent forward tipping
adjustable shelving	Closed cabinet shelves support 3 height positions with 50mm incremental adjustment
soft-close doors	Concealed hinges provide 110 degree door opening with automatic soft-close damping in final 15 degrees of travel
cable management	Rear access cutouts on open shelves allow concealed power routing for LED lighting and displayed devices
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

executive office backdrop	Placed behind executive desks for combined open display of awards and concealed file storage
open office break area storage	Used for displaying reading materials, decor and storing office supplies in shared work zones
reception area display	Positioned in lobby areas to display company credentials, decor and visitor information
private study home office	Installed in home workspaces for book storage and personal item display
meeting room ancillary storage	Placed along meeting room walls to store reference materials, presentation supplies and refreshments
recommended complementary furniture	Paired with light wood executive desks and ergonomic office seating for coordinated office interiors

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 14749:2016	Safety and strength requirements for domestic and office storage furniture and kitchen worktops
EN 12521:2015	Furniture strength, durability and safety requirements for non-domestic storage units
EN 14073-2:2004	Office storage furniture, safety and strength requirements for filing and display cabinets

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.9

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to dimensional and structural quality checks
GB 18580-2017	Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ for interior use
GB/T 4893.8-2013	Surface abrasion resistance test method for furniture finishes
GB/T 10357.5-2011	Strength and durability test for storage furniture shelving and cabinet structures

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and structural quality checks;
2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, E1 grade ≤0.124mg/m³ for interior use;
3. GB/T 4893.8-2013: Surface abrasion resistance test method for furniture finishes;
4. GB/T 10357.5-2011: Strength and durability test for storage furniture shelving and cabinet structures;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OF-BK-2120-ASY-LED

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OF-BK-2120-ASY-LED

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OF-BK-2120-ASY-LEDOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This floor-standing asymmetrical office storage bookshelf cabinet delivers a balanced blend of concealed storage and open display, defined by its modern, mixed-material silhouette with rounded corner details. Its layout splits into a narrower left closed storage section and a wider right open shelving area, with a semi-transparent fluted glass panel spanning the middle tier that diffuses light while partially obscuring stored items. The unit rests on a full-width dark wood veneer plinth that sits flush with the floor for a streamlined look, with consistent finish matching across door panels, edge banding, and structural components. The body is constructed from E1 grade medium density fiberboard, with left section doors finished in herringbone pattern wood veneer sealed with a matte clear coat. Open shelf interiors feature a matte light grey scratch- and stain-resistant laminate surface, while the middle panel uses vertically ribbed tempered glass with higher impact strength than standard annealed glass. Recessed warm white linear LED strips are integrated under each open shelf, activated via a hardwired wall switch to illuminate displayed items. All exposed edges are finished with color-matched PVC edge banding, and left section doors operate on concealed nickel-plated steel soft-close hinges. Functional design supports flexible organizational needs: the left closed cabinet holds adjustable shelves that can be set to multiple height positions for concealed document storage, while the right section’s five tiered asymmetric open bays accommodate displayed items and frequently accessed reference materials. The fluted glass middle tier adds semi-concealed storage that lets light pass across both open bays, and included wall anchor connectors secure the unit to walls to prevent forward tipping. This cabinet suits a range of commercial and residential spaces, including executive offices as a desk backdrop for awards and file storage, open office break areas for shared supplies and reading materials, reception lobbies for company credentials and visitor information, private home studies for books and personal items, and meeting rooms for reference materials and presentation supplies. It pairs seamlessly with light wood executive desks and ergonomic office seating for coordinated interiors. For procurement planning, note that the unit is delivered unbranded, requires on-site assembly, ships across multiple cartons, and supports static weight loads aligned with standard office storage use. Buyers should account for required wall anchor installation to meet safety guidelines, and select placement that allows access to the hardwired wall switch for integrated lighting control.

Asymmetrical Office Storage Bookshelf Cabinet with LED Lit Shelves and Fluted Glass Panel Specifications

Suppliers and stock