Product supplierTwo-Tone Modular Floor Storage Cabinet with Glass Doors and Drawers, 18mm P2 grade MDF with matte off-white lacquer
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 400 × 1880 mm | |
|---|---|---|
| Left solid door section width | 400 mm | |
| Smoked glass display column width | 320 mm | |
| Single drawer front width | 347 mm | |
| Open shelf compartment depth | 360 mm | |
| Fluted decorative panel height | 300 mm | |
| Lower curved cutout door height | 420 mm | |
| Carcass panel thickness | 18 mm | |
| Back panel thickness | 5 mm | |
| Tempered glass door thickness | 5 mm | |
| Edge band thickness | 1 mm | |
| Adjustable shelf hole spacing | 32 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 55 kg | |
|---|---|---|
| Open shelf static load capacity | 25 kg | |
| Tempered glass door impact resistance | 10 J | |
| Door hinge open/close cycle rating | 50000 cycles | |
| Drawer slide open/close cycle rating | 30000 cycles | |
| Total internal storage volume | 1.52 m³ | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main carcass panels | 18mm P2 grade MDF with matte off-white lacquer | |
|---|---|---|
| Wood-tone drawer and door panels | 18mm particle board with light oak wood veneer | |
| Vertical display compartments | 5mm smoked tempered glass framed in black metal trim | |
| Middle decorative panel | 18mm MDF with vertical fluted ribbed off-white finish | |
| Drawer and door hinges | Cold-rolled steel with soft-close hydraulic damping | |
| Drawer slides | Three-section side-mount cold-rolled steel slides | |
| Back panel | 5mm hardboard with matte finish | |
| Base plinth | 18mm engineered wood with matching light wood veneer | |
| Door catches | Magnetic ABS plastic catches for solid and glass doors | |
| Edge banding | 1mm PVC matching panel finish on all exposed edges | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Left solid door storage | Two vertically stacked swing doors open 110 degrees for concealed full-height storage | |
|---|---|---|
| Upper open shelves | Three rows of divided open compartments for display and frequently accessed items | |
| Smoked glass cabinet | Three vertically stacked hinged glass doors for dust-protected display storage | |
| Middle drawer storage | Three equal-width soft-close drawers for small item organization in upper middle section | |
| Curved lower door storage | Curved-cutout swing door provides access to lower right open storage compartment | |
| Adjustable shelves | All open and glass-enclosed compartments support 32mm pitch height adjustment | |
| Anti-tip safety | Two wall-mounted anti-tip brackets secure tall cabinet to prevent forward tipping | |
| Fluted decorative panel | Fixed fluted center panel adds textural contrast without operational function | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Modern living room | Provides mixed open and concealed storage for media accessories, decor and books | |
|---|---|---|
| Home office | Stores documents, office supplies and display items behind mixed door and shelf modules | |
| Open-plan reception area | Displays corporate decor and stores reception supplies in tidy mixed storage modules | |
| Contemporary dining room | Stores tableware, linens and display items with accessible drawer and shelf space | |
| Recommended wall placement | Position against flat load-bearing wall secured with anti-tip hardware for stability |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and strength requirements for domestic and kitchen storage furniture | |
|---|---|---|
| EN 12521:2015 | Strength, durability and safety requirements for domestic storage furniture |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to cabinet dimensional and structural tolerance | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable to panel material acceptance | |
| GB/T 4893.4-2013 | Surface wear resistance test for furniture coatings, applicable to finish durability acceptance |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to cabinet dimensional and structural tolerance; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable to panel material acceptance; 3. GB/T 4893.4-2013: Surface wear resistance test for furniture coatings, applicable to finish durability acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool