商品供应商Light Natural Wood Square 4-Seater Dining Table with Rounded Corners,Walnut
可联系供应商获取生产周期与报价。
| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录,发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall dimensions | 900 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg cross-section | 48 x 48 mm square solid wood | |
| Under-table knee clearance height | 640 mm | |
| Corner radius | 30 mm softly rounded | |
| Leg setback from table edge | 50 mm | |
| Apron height below tabletop | 85 mm | |
| Floor clearance under apron | 665 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Uniform distributed tabletop load | 100 kg | |
|---|---|---|
| Net product weight | 28 kg | |
| Seating capacity | 4 people | |
| Static leg load per leg | 40 kg | |
| Finish scratch resistance | 2000 abrasion cycles | |
| Wood moisture content | 12% | |
| Structural warranty period | 10 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Tabletop panel | Solid natural hardwood with visible grain, matte sealed finish | |
|---|---|---|
| Support legs | Solid square hardwood, vertical grain matched to tabletop | |
| Connecting apron | Solid hardwood frame joined to legs and tabletop | |
| Surface finish | Clear matte eco-friendly wood sealant, water and stain resistant | |
| Foot pads | Anti-slip non-marking rubber pads fitted to leg bases | |
| Assembly hardware | Zinc-plated steel bolts, washers and included hex wrench | |
| Edge treatment | Sanded smooth rounded corners with no sharp edges | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Assembly requirement | Knock-down leg attachment with included tool, 15 minute assembly time | |
|---|---|---|
| Floor protection | Rubber foot pads prevent floor scratches and sliding without glides | |
| Surface maintenance | Sealed finish allows wipe-clean with damp cloth, no special polish needed | |
| Stability reinforcement | Apron frame connects all four legs to eliminate tabletop wobble | |
| Seating access | Corner leg placement allows unobstructed chair pull-out on all four sides | |
| Post-assembly maintenance | Retighten connecting bolts two weeks after first assembly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| 20ft container loading quantity | 220 units | |
|---|---|---|
| 40ft HQ container loading quantity | 540 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
推荐空间 / 目标用户 / 使用方式
| Small apartment dining area | Compact 90cm square footprint fits 4person dining in limited floor space | |
|---|---|---|
| Kitchen breakfast nook | Standard dining height pairs with casual wooden dining chairs for daily meals | |
| Studio apartment multi-use surface | Doubles as casual work or craft surface when not used for dining | |
| Small cafe dining seating | Light natural wood finish fits minimalist Nordic commercial casual dining interiors | |
| Balcony casual dining space | Solid wood construction withstands mild indoor-sheltered outdoor temperature variation |
欧洲市场准入与化学品要求
| EN 12521:2015 | Furniture for domestic use: strength, durability and safety requirements for dining tables | |
|---|---|---|
| EN 71-3:2019 | Safety of toys: migration of certain elements, applicable for finished surface chemical safety |
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance, applicable for finish durability acceptance |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001:Indoor decoration material limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing; 3. GB/T 4893.8-2013:Furniture surface test for abrasion resistance, applicable for finish durability acceptance; 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告,可选择公制或英制单位。
导出全部商品信息与参数模块,文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具