| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 900 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Leg cross-section | 48 x 48 mm square solid wood | |
| Under-table knee clearance height | 640 mm | |
| Corner radius | 30 mm softly rounded | |
| Leg setback from table edge | 50 mm | |
| Apron height below tabletop | 85 mm | |
| Floor clearance under apron | 665 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Uniform distributed tabletop load | 100 kg | |
|---|---|---|
| Net product weight | 28 kg | |
| Seating capacity | 4 people | |
| Static leg load per leg | 40 kg | |
| Finish scratch resistance | 2000 abrasion cycles | |
| Wood moisture content | 12% | |
| Structural warranty period | 10 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Solid natural hardwood with visible grain, matte sealed finish | |
|---|---|---|
| Support legs | Solid square hardwood, vertical grain matched to tabletop | |
| Connecting apron | Solid hardwood frame joined to legs and tabletop | |
| Surface finish | Clear matte eco-friendly wood sealant, water and stain resistant | |
| Foot pads | Anti-slip non-marking rubber pads fitted to leg bases | |
| Assembly hardware | Zinc-plated steel bolts, washers and included hex wrench | |
| Edge treatment | Sanded smooth rounded corners with no sharp edges | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down leg attachment with included tool, 15 minute assembly time | |
|---|---|---|
| Floor protection | Rubber foot pads prevent floor scratches and sliding without glides | |
| Surface maintenance | Sealed finish allows wipe-clean with damp cloth, no special polish needed | |
| Stability reinforcement | Apron frame connects all four legs to eliminate tabletop wobble | |
| Seating access | Corner leg placement allows unobstructed chair pull-out on all four sides | |
| Post-assembly maintenance | Retighten connecting bolts two weeks after first assembly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| 20ft container loading quantity | 220 units | |
|---|---|---|
| 40ft HQ container loading quantity | 540 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment dining area | Compact 90cm square footprint fits 4person dining in limited floor space | |
|---|---|---|
| Kitchen breakfast nook | Standard dining height pairs with casual wooden dining chairs for daily meals | |
| Studio apartment multi-use surface | Doubles as casual work or craft surface when not used for dining | |
| Small cafe dining seating | Light natural wood finish fits minimalist Nordic commercial casual dining interiors | |
| Balcony casual dining space | Solid wood construction withstands mild indoor-sheltered outdoor temperature variation |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use: strength, durability and safety requirements for dining tables | |
|---|---|---|
| EN 71-3:2019 | Safety of toys: migration of certain elements, applicable for finished surface chemical safety |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance, applicable for finish durability acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Indoor decoration material limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing; 3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, applicable for finish durability acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
