纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1400 × 800 × 750 mm
Tabletop thickness	45 mm
Leg cross-section	60 x 60 mm square
Leg wall thickness (solid wood)	60 mm
Apron height	100 mm
Apron thickness	25 mm
Under-table knee clearance height	605 mm
Tabletop edge radius	3 mm
Leg floor contact pad diameter	30 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Distributed static tabletop load	100 kg
Single leg static vertical load	40 kg
Net product weight	32 kg
Surface finish abrasion resistance	1000 cycles
Wood moisture content	12%
Wobble deflection under full load	2 mm
Finish coating thickness	0.15 mm
Connector size (corner bolt)	M8 x 60 mm
Seating capacity per long side	2 people
Top Static Load Reference	150 kg uniformly distributed

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	Solid rubberwood with natural clear matte finish
Support legs	Solid square hardwood, matching natural wood tone
Connecting apron	Solid hardwood, mortise-and-tenon or bolted joint to legs
Surface finish	Water-based clear matte lacquer, low-VOC formulation
Corner hardware	Zinc-plated steel bolts and barrel nuts for knockdown assembly
Floor contact pads	Non-marking TPE rubber pads adhered to leg bases
Wood surface treatment	Sanded to 240-grit smoothness before finish application
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Table structure	Fixed non-extendable rectangular top, no leaf storage
Assembly type	Knockdown assembly, legs attach to apron with included hardware
Seating access	Unobstructed access on all four sides for 4 diners
Floor protection	Non-marking rubber feet prevent hardwood floor scratching
Surface maintenance	Non-porous finish allows wipe-clean with damp cloth
Load distribution	Apron frame transfers tabletop load evenly to four corner legs
Stability design	Four corner leg placement provides 1400x800mm support base
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packaging volume (CBM)	0.261
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room	Fits 4-person household daily meals with compact rectangular footprint
Open-plan kitchen diner	Light natural wood tone complements neutral, Nordic or Japandi interior schemes
Small apartment breakfast nook	1400mm length fits compact spaces without occupying excess floor area
Casual meeting space in small office	Works for team break rooms or informal small group meeting areas
Rental property furnishing	Durable solid wood construction withstands frequent use in furnished rentals
Cafe small dining seating	Suitable for independent cafes serving 2-person and 4-person dining parties

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture strength, durability and safety requirements for domestic dining tables, applies to performance validation
EN 71-3:2019	Migration of certain elements safety standard, applies if used in households with children
EN 15187:2007	Assessment of surface resistance to cold liquids for furniture, applies to finish spill resistance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applies to dimensional and structural acceptance
GB 18584-2001	Indoor decoration material formaldehyde emission limit for wood furniture, applies to material safety
GB/T 4893.8-2013	Furniture surface test for abrasion resistance, applies to finish durability acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applies to dimensional and structural acceptance；
2. GB 18584-2001：Indoor decoration material formaldehyde emission limit for wood furniture, applies to material safety；
3. GB/T 4893.8-2013：Furniture surface test for abrasion resistance, applies to finish durability acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-RW-NAT-1400

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-RW-NAT-1400

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-RW-NAT-1400打开导出工具

页面快速操作

发布采购询价

产品描述

The Light Natural Solid Wood Rectangular 4-Seater Fixed Dining Table presents a clean Nordic minimalist profile defined by its linear rectangular form and four straight, square corner legs. Unadorned apron frames connect the tabletop to the legs, creating a balanced, open silhouette with unobstructed access on all four sides, finished in a warm, consistent natural wood tone that pairs seamlessly with soft neutral interior palettes. Constructed from solid rubberwood for the tabletop and matching solid hardwood for legs and apron components, the piece features a natural matte clear water-based low-VOC lacquer finish applied over surfaces sanded to a smooth 240-grit texture. Corner connections use zinc-plated steel bolts and barrel nuts for knockdown assembly, with joints between apron and legs secured via either mortise-and-tenon joinery or bolted fastenings. Non-marking TPE rubber pads adhere to each leg base to protect finished flooring, while the apron frame distributes tabletop load evenly across the four corner legs to deliver stable, consistent support. The fixed non-extendable table offers dedicated seating for four diners, with ample under-table knee clearance for comfortable use. Its non-porous finish supports simple wipe-clean maintenance with a damp cloth, making daily upkeep straightforward. This table fits equally well in residential and light commercial settings. For homes, it suits standard 4-person household dining rooms, open-plan kitchen diners styled with Nordic or Japandi themes, and small apartment breakfast nooks where its compact footprint avoids overcrowding floor space. It also functions effectively in small office break rooms or casual informal meeting areas, furnished rental properties where durable construction stands up to regular turnover use, and independent cafe seating areas serving small groups. Procurement teams and residential buyers should note the product ships in two cartons per set, with an assembly time of 40 minutes per unit using included hardware; the knockdown design supports easier transport and placement compared to fully assembled solid wood pieces. The unbranded model carries a 32kg net weight, and its consistent light natural finish supports flexible coordination with a wide range of seating styles across different design schemes.

Light Natural Solid Wood Rectangular 4-Seater Fixed Dining Table Specifications

供应商与现货