Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1400 × 800 × 750 mm
Tabletop thickness	45 mm
Leg cross-section	60 x 60 mm square
Leg wall thickness (solid wood)	60 mm
Apron height	100 mm
Apron thickness	25 mm
Under-table knee clearance height	605 mm
Tabletop edge radius	3 mm
Leg floor contact pad diameter	30 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Distributed static tabletop load	100 kg
Single leg static vertical load	40 kg
Net product weight	32 kg
Surface finish abrasion resistance	1000 cycles
Wood moisture content	12%
Wobble deflection under full load	2 mm
Finish coating thickness	0.15 mm
Connector size (corner bolt)	M8 x 60 mm
Seating capacity per long side	2 people
Top Static Load Reference	150 kg uniformly distributed

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop	Solid rubberwood with natural clear matte finish
Support legs	Solid square hardwood, matching natural wood tone
Connecting apron	Solid hardwood, mortise-and-tenon or bolted joint to legs
Surface finish	Water-based clear matte lacquer, low-VOC formulation
Corner hardware	Zinc-plated steel bolts and barrel nuts for knockdown assembly
Floor contact pads	Non-marking TPE rubber pads adhered to leg bases
Wood surface treatment	Sanded to 240-grit smoothness before finish application
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Table structure	Fixed non-extendable rectangular top, no leaf storage
Assembly type	Knockdown assembly, legs attach to apron with included hardware
Seating access	Unobstructed access on all four sides for 4 diners
Floor protection	Non-marking rubber feet prevent hardwood floor scratching
Surface maintenance	Non-porous finish allows wipe-clean with damp cloth
Load distribution	Apron frame transfers tabletop load evenly to four corner legs
Stability design	Four corner leg placement provides 1400x800mm support base
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Packaging volume (CBM)	0.261
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Fits 4-person household daily meals with compact rectangular footprint
Open-plan kitchen diner	Light natural wood tone complements neutral, Nordic or Japandi interior schemes
Small apartment breakfast nook	1400mm length fits compact spaces without occupying excess floor area
Casual meeting space in small office	Works for team break rooms or informal small group meeting areas
Rental property furnishing	Durable solid wood construction withstands frequent use in furnished rentals
Cafe small dining seating	Suitable for independent cafes serving 2-person and 4-person dining parties

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture strength, durability and safety requirements for domestic dining tables, applies to performance validation
EN 71-3:2019	Migration of certain elements safety standard, applies if used in households with children
EN 15187:2007	Assessment of surface resistance to cold liquids for furniture, applies to finish spill resistance

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applies to dimensional and structural acceptance
GB 18584-2001	Indoor decoration material formaldehyde emission limit for wood furniture, applies to material safety
GB/T 4893.8-2013	Furniture surface test for abrasion resistance, applies to finish durability acceptance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to dimensional and structural acceptance;
2. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture, applies to material safety;
3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance, applies to finish durability acceptance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DT-RW-NAT-1400

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DT-RW-NAT-1400

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DT-RW-NAT-1400Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Light Natural Solid Wood Rectangular 4-Seater Fixed Dining Table presents a clean Nordic minimalist profile defined by its linear rectangular form and four straight, square corner legs. Unadorned apron frames connect the tabletop to the legs, creating a balanced, open silhouette with unobstructed access on all four sides, finished in a warm, consistent natural wood tone that pairs seamlessly with soft neutral interior palettes. Constructed from solid rubberwood for the tabletop and matching solid hardwood for legs and apron components, the piece features a natural matte clear water-based low-VOC lacquer finish applied over surfaces sanded to a smooth 240-grit texture. Corner connections use zinc-plated steel bolts and barrel nuts for knockdown assembly, with joints between apron and legs secured via either mortise-and-tenon joinery or bolted fastenings. Non-marking TPE rubber pads adhere to each leg base to protect finished flooring, while the apron frame distributes tabletop load evenly across the four corner legs to deliver stable, consistent support. The fixed non-extendable table offers dedicated seating for four diners, with ample under-table knee clearance for comfortable use. Its non-porous finish supports simple wipe-clean maintenance with a damp cloth, making daily upkeep straightforward. This table fits equally well in residential and light commercial settings. For homes, it suits standard 4-person household dining rooms, open-plan kitchen diners styled with Nordic or Japandi themes, and small apartment breakfast nooks where its compact footprint avoids overcrowding floor space. It also functions effectively in small office break rooms or casual informal meeting areas, furnished rental properties where durable construction stands up to regular turnover use, and independent cafe seating areas serving small groups. Procurement teams and residential buyers should note the product ships in two cartons per set, with an assembly time of 40 minutes per unit using included hardware; the knockdown design supports easier transport and placement compared to fully assembled solid wood pieces. The unbranded model carries a 32kg net weight, and its consistent light natural finish supports flexible coordination with a wide range of seating styles across different design schemes.

Light Natural Solid Wood Rectangular 4-Seater Fixed Dining Table Specifications

Suppliers and stock