商品供应商Light Natural Wood Freestanding Open Wardrobe with Dual Hanging Zones, Central Shelves and Drawer，18mm thick engineered particleboard with natural light oak melamine foil finish
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 1600 × 600 × 2000 mm | |
|---|---|---|
| left long hanging zone internal width | 500 mm | |
| right tall hanging zone internal width | 700 mm | |
| central open shelf column width | 300 mm | |
| long hanging zone internal height | 1400 mm | |
| short hanging zone internal height | 900 mm | |
| lower short hanging zone under drawer height | 700 mm | |
| central drawer internal dimensions | 700 x 400 x 120 mm | |
| shelf compartment internal dimensions | 300 x 300 mm | |
| upper bulk storage shelf dimensions | 500 x 400 x 300 mm | |
| carcass panel thickness | 18 mm | |
| base leg height | 100 mm | |
| back panel thickness | 5 mm | |
| edge band thickness | 1 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| unit net weight | 75 kg | |
|---|---|---|
| hanging rod static load capacity | 30 kg per rod | |
| total clothing storage capacity | 80 hangers plus 4 shelf compartments and 1 drawer | |
| surface scratch resistance | 2000 abrasion cycles | |
| anti-tip hardware load rating | 50 kg pull resistance | |
| hinge and slide cycle rating | 50000 open/close cycles | |
| drawer slide load rating | 25 kg per pair | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| main carcass | 18mm thick engineered particleboard with natural light oak melamine foil finish | |
|---|---|---|
| back panel | 5mm thick hardboard with matching light wood finish | |
| hanging rods | 25mm diameter powder-coated steel with matte silver finish | |
| central drawer front | 18mm thick matching engineered wood with recessed metal pull handle | |
| shelf surfaces | 18mm thick matching engineered wood with 1mm PVC edge banding | |
| base legs | Solid rubberwood with natural clear coat finish | |
| drawer slides | Cold-rolled steel side-mounted ball-bearing slides | |
| edge banding | 1mm thick PVC in matching wood tone | |
| anti-tip hardware | Zinc-plated steel wall anchor brackets and screws | |
| drawer internal base | 12mm thick high-density fiberboard | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| dual separate hanging zones | Left full-height zone for long garments, right split zone for short tops and lower trousers | |
|---|---|---|
| four central open shelves | Fixed horizontal shelves in middle column for folded clothes, cushions or accessories | |
| central soft-close drawer | Single full-width drawer between right hanging sections for small clothing items | |
| upper bulk storage shelf | Top-left enclosed open shelf for folded bedding, linens or out-of-season items | |
| wall anti-tip anchoring | Included hardware secures top rear of unit to wall studs | |
| no door access | Completely open front design without hinged or sliding doors | |
| modular shelf adjustment | Pre-drilled pin holes allow 32mm incremental height adjustment of central shelves | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| residential bedroom | Primary clothing storage for studio, apartment or master bedroom open closet layouts | |
|---|---|---|
| rental property furnishing | Freestanding installation without wall modification required (anchoring recommended) | |
| boutique retail display | Open front design displays garments and accessories for clothing store visual merchandising | |
| entryway dressing zone | Placed near entry for outerwear, bags and daily outfit storage | |
| small apartment storage | Compact 1600mm width fits narrow bedroom spaces without occupying excess floor area | |
| dormitory or shared housing | Dual hanging zones divide storage space for 2 users sharing a bedroom |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 14073-2:2004 | Storage furniture for office and domestic use, safety and strength requirements for freestanding units | |
|---|---|---|
| EN 12221-1:2005+A1:2013 | Furniture for clothing storage, functional and structural performance test methods |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and structural quality checks | |
|---|---|---|
| GB 18584-2001 | Limit of formaldehyde emission for indoor wooden furniture, mandatory for indoor air safety |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to dimensional and structural quality checks； 2. GB 18584-2001：Limit of formaldehyde emission for indoor wooden furniture, mandatory for indoor air safety； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具