纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1450 × 800 × 450 mm
Glass top thickness	10 mm
Metal tube wall thickness	1.5 mm
Frame leg section size	30 x 30 mm
Lower underframe ground clearance	20 mm
X-brace end support angle from table edge	45 degrees
Glass top overhang beyond frame	10 mm
Lower frame perimeter width	1380 mm
Lower frame perimeter depth	730 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	30 kg
Distributed static top load capacity	100 kg
Recommended maximum single point load	30 kg
Floor contact point count	4
Frame static lateral load resistance	50 kg
Expected service life under residential use	5 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	10 mm thick tempered smoked black glass with smooth reflective surface
Frame structure	Matte black powder-coated square steel tubular construction
End supports	Angled X-shaped steel tube braces welded to vertical leg sections
Lower perimeter frame	Continuous steel tube connecting all four leg assemblies for rigidity
Glass mounting hardware	EPDM rubber gaskets and M6 steel mounting screws
Surface finish on metal	Textured matte black powder coat, 60 micron thickness
Glass edge treatment	Flat polished smooth edge with rounded corners
Frame weld joints	Ground smooth welded joints with matching powder coat touch-up
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Surface use	Flat level top for holding drinks, decor, reading materials and small items in lounge settings
Floor protection	Fixed plastic glide pads at each frame corner to prevent floor scratching
Base stability	Rigid X-brace end supports prevent lateral frame racking during regular use
Cleaning access	Open frame design with no lower shelf allows full floor access under the table for cleaning
Assembly type	Knocked-down flat-pack assembly with bolted frame joints for shipping
Glass safety property	Tempered glass breaks into small blunt granules to reduce injury risk if damaged
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living rooms	Placed centrally in front of sofas for shared use during casual seating and gatherings
Office reception lounges	Used in guest waiting areas paired with upholstered seating to hold refreshments and reading materials
Studio apartment open plan spaces	Compact open-frame design maintains visual lightness in small seating zones
Modern industrial themed interiors	Matte black metal and smoked glass aesthetic complements minimalist and industrial decor schemes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Domestic furniture glass safety	EN 12150
Furniture strength and stability	EN 12521

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Tempered glass safety requirement	GB 15763.2
Metal furniture coating durability	GB/T 3325
Furniture structural stability test	GB/T 10357.1

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Tempered glass safety requirement：GB 15763.2；
2. Metal furniture coating durability：GB/T 3325；
3. Furniture structural stability test：GB/T 10357.1；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-BGX1450

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-BGX1450

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-BGX1450打开导出工具

页面快速操作

发布采购询价

产品描述

The Rectangular Smoked Black Glass Coffee Table with Matte Black Geometric X-Brace Metal Frame, model CT-BGX1450, is an unbranded public furniture piece designed for modern and industrial interior settings. Its visual form features a sleek rectangular tempered smoked black glass top paired with an open matte black metal frame, defined by 45-degree angled X-brace end supports that create a structured, geometric silhouette. The glass top has flat polished smooth edges with rounded corners, overhanging the frame slightly for a refined, streamlined appearance, while the low-profile lower underframe sits close to the floor to maintain a grounded, unobtrusive presence in layout arrangements. Constructed for lasting residential and light commercial use, the table’s top is 10mm thick tempered smoked black glass with a smooth reflective surface, engineered to break into small blunt granules to reduce injury risk if damaged. The frame is built from matte black powder-coated square steel tubular sections, with welded X-brace end supports attached to vertical legs, and a continuous lower perimeter steel tube connecting all four leg assemblies for enhanced rigidity. All weld joints are ground smooth and finished with matching powder coat, while the glass is secured to the frame using EPDM rubber gaskets and M6 steel mounting screws. Fixed plastic glide pads at each frame corner prevent floor scratching, and the textured 60 micron matte black powder coat finish on metal components resists everyday wear. Practically, the flat level tabletop provides a stable surface for holding drinks, decor, reading materials and small items in lounge settings. The rigid X-brace design prevents lateral frame racking during regular use, and the fully open frame structure with no lower shelf allows unobstructed access to the floor beneath for quick, thorough cleaning. The product ships as knocked-down flat-pack components across two cartons, with bolted frame joints that support straightforward on-site assembly. Cable management features integrated into the design accommodate power and data cables for connected lounge setups, with the supporting tray rated for appropriate load capacity. This coffee table is well suited for central placement in residential living rooms, positioned in front of sofas for casual seating and small gatherings. It also fits naturally in office reception lounges, where it pairs with upholstered guest seating to hold refreshments and reading materials, and works effectively in studio apartment open plan spaces, where its open-frame design preserves visual lightness in compact seating zones. Its matte black metal and smoked glass aesthetic aligns seamlessly with modern and industrial themed interiors, complementing minimalist decor schemes. For procurement, stakeholders should note the set is packaged across two cartons, with assembly required on receipt. The table supports specified distributed static and single point loads suitable for standard lounge use, with an expected residential service life of five years. Weight ratings for the top and frame align with typical low-traffic to moderate-traffic lounge applications, and floor protection pads are included to preserve hard flooring surfaces in both residential and commercial installations.

Rectangular Smoked Black Glass Coffee Table with Matte Black Geometric X-Brace Metal Frame Specifications

供应商与现货