This 2-Piece Round Nesting Coffee Table Set with Matte Black Conical Pedestal Bases (model NCT-RD-8060-BLK-WG) delivers a refined modern minimalist silhouette aligned with contemporary residential interior preferences. Each table stands at a fixed 450 mm height, matched to standard sofa seat heights, with single center-positioned conical pedestal bases that leave full, unobstructed legroom around every table perimeter. The set features two circular tabletops: the larger 800 mm diameter table carries a matte white sintered stone surface with subtle marble-effect veining and a polished edge, while the smaller 600 mm diameter table has a matte grey sintered stone top with a fine linear stone texture. Both tabletops are 12 mm thick, reinforced on the underside with bonded 10 mm MDF backer boards for structural rigidity, and paired with matte black conical carbon steel pedestal bases. The 1.5 mm thick steel bases receive a 60μm matte powder-coat finish with anti-corrosion treatment, graded 1 for coating durability, and connect to tabletops via 3 mm thick galvanized steel plates secured with four M8 bolts per unit. 5 mm thick non-slip EVA rubber pads line each base bottom to prevent floor scuffing, with floor contact diameters of 550 mm for the large table and 450 mm for the small table. The non-porous sintered stone surfaces offer 6 Mohs scratch resistance, 180 °C heat tolerance, and stain resistance against common food and beverage spills, making the set well suited for holding drink sets, decorative displays, snacks, and reading materials for up to four casual users. The large table supports 100 kg of distributed static load, while each pedestal base is rated for 150 kg of static stability load. Users may manually tuck the small table partially under the large table without tools to achieve a minimal combined footprint of 820 x 820 mm, or pull the small table out fully to serve as an independent side or end table next to armchairs or seating groups. Assembly requires attaching each base to its tabletop with the included hex key, a process taking 40 minutes per set; the tables have a fixed position design without casters for steady, non-slip floor contact. The set is ideally placed directly in front of four-seat sectionals or standard sofas in small to medium apartments, open-plan living areas, and lounge spaces, complementing modern minimalist, light luxury, and Italian contemporary decor schemes. Procurement teams should note each set ships in two cartons with a total packaged gross weight of 90 kg and 0.55 m³ packaging volume, with no casters included for mobile reconfiguration, and non-adjustable fixed height that aligns only with standard sofa seat elevations.