纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	950 × 850 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg static seated load
Seat foam density	35 kg/m3 polyurethane foam
Back foam density	28 kg/m3 polyurethane foam
Foam rebound value	35%
Back support angle	100 degrees from horizontal
Seating capacity	1 person
Suggested daily use duration	8 hours
Fabric abrasion acceptance target	30,000 Martindale cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Woven pinstripe fabric in cream with fine dark vertical yarns
Seat cushion	Padded polyurethane core wrapped in upholstery fabric
Backrest padding	Fixed upholstered foam pad over rigid backing
Arm pads	Fabric-covered foam over a structural arm frame
Internal load frame	Kiln-dried hardwood or hardwood-composite structural frame
Arm accent trim	Dark polished wood-look trim with a squared L-shaped profile
Feet	Dark stained wood or wood-composite block feet
Seat platform	12 mm engineered board with webbing or spring support
Deck stitching	Visible straight seam around cushion and arm panels
Bottom dust cover	Black non-woven fabric under-seat cover
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Back support	Fixed high back with head-level upper panel and lumbar-level lower pad
Arm support	Two fixed wide arms with padded caps and dark protective edge trim
Seating action	Fixed single cushion on a rigid deck, with no swivel, tilt, or folding mechanism
Foot stability	Four short block feet distribute load at the corners
Cleaning access	80 mm under-base clearance allows a vacuum head or mop edge to pass beneath
Upholstery maintenance	Removable or secured seat cushion construction should be specified as zipper-removable for cleaning
Arrangement flexibility	Individual chair can be paired with matching two-seat or three-seat reception units
Occupancy boundary	600 mm inner seat width defines one-person use
Foot block size	70 x 70 mm square cross section
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

40HQ loading quantity	86 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive reception room	Formal high-back silhouette and neutral pinstripe fabric support VIP guest seating
Manager office guest area	Single chair can face an executive desk or pair with a sofa and coffee table
Meeting lounge	Fixed arms and 430 mm seat height facilitate short meetings and waiting periods
Hotel or club lounge	Cream upholstery and dark trim create a traditional hospitality appearance
Government or corporate waiting area	High-back visual privacy and structured silhouette suit formal waiting spaces
Senior-care or consultation setting	Wide arms provide support when sitting or standing, but accessibility dimensions should be checked
Recommended grouping	One armchair with one two-seat sofa and one coffee table creates a balanced reception set
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RCP-1S-PINST-950

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RCP-1S-PINST-950

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RCP-1S-PINST-950打开导出工具

页面快速操作

发布采购询价

产品描述

The Upholstered Reception Armchair with Dark Wood Accents, model RCP-1S-PINST-950, is an unbranded single-seat chair designed for formal reception, office, hospitality, and consultation settings. Its appearance balances a traditional high-back silhouette with a calm neutral palette: cream woven pinstripe fabric, formed with fine dark vertical yarns, is paired with dark polished wood-look trim and short block feet. The trim follows a squared L-shaped profile along the arms, while visible straight seams define the cushion and arm panels. Fixed wide arms, padded caps, and a structured upright back give the piece a tailored, orderly look suitable for spaces where guest comfort and a professional atmosphere are both important. Construction centers on a kiln-dried hardwood or hardwood-composite structural frame. The seat platform uses 12 mm engineered board with webbing or spring support, and the fixed single cushion rests on a rigid deck. The seat contains 35 kg/m3 polyurethane foam and has a finished cushion thickness of 90 mm; the backrest uses 28 kg/m3 polyurethane foam with 70 mm padding over rigid backing. The foam rebound value is 35 percent, and the back is set at 100 degrees from horizontal. A 240 mm lumbar support zone and head-level upper panel provide structured support, while the 540 mm clear width between armrests gives defined seating space. The recommended capacity is 160 kg static seated load for one person, with suggested daily use of eight hours. Functionality is intentionally simple and stable. There is no swivel, tilt, or folding mechanism; four corner block feet distribute the load and keep the visual profile low. The 80 mm under-base clearance allows a vacuum head or mop edge to pass underneath. For maintenance planning, buyers should specify zipper-removable seat cushion construction if removable cleaning access is required, rather than assuming this from the standard product description. The chair is well suited to executive reception rooms and government or corporate waiting areas, where the high back offers visual privacy and a formal impression. It also works facing a manager’s desk, in meeting lounges, or with matching two-seat and three-seat reception units. In hotel and club lounges, the cream upholstery and dark accents create a traditional hospitality character. Wide arms can assist users when sitting or standing, although accessibility dimensions should be checked for senior-care or consultation applications. Procurement teams should note that each set ships in two cartons, with reference packaged gross weight of 23 kg, carton dimensions of 850 by 420 by 720 mm, and 0.26 cubic meters per set. Assembly time is 40 minutes per set, and an 86-unit loading quantity applies to a 40HQ container. The seat height is referenced at 430 mm in the intended meeting-lounge application.

Upholstered Reception Armchair with Dark Wood Accents Specifications

供应商与现货