纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 850 × 880 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Chair net weight	38 kg
Rated occupant load	160 kg
Seat foam density	35 kg/m3
Back foam density	28 kg/m3
Foam rebound rating	40%
Fabric or leather abrasion acceptance	50,000 cycles
Static seat proof-load target	320 kg
Seating capacity	1 person
Warranty target	3 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Cream leather-look finished material with sewn boxed panels
Seat cushion padding	140 mm high-resilience polyurethane foam over a supporting deck
Back cushion padding	160 mm shaped polyurethane foam with rounded rolled top
Arm support structure	Upholstered timber-composite arm box capped with stained wood panel
Arm cap finish	25 mm reddish-brown wood veneer or laminated wood-composite panel with polished finish
Lower plinth	Dark brown wood-composite perimeter platform with stain or laminate finish
Internal load frame	40 mm hardwood or engineered-wood structural rail frame
Seat support deck	12 mm composite board or webbed suspension platform
Fasteners and joinery	Steel screws, corner blocks, and adhesive-bonded upholstery joints
Thread and seams	Polyester upholstery thread with 70 mm visible seam pitch on cushion fronts
Base protection	Fiber or polymer floor glides set into the dark plinth
Color offering	1 visible cream color with dark reddish-brown wood trim

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed single-person lounge seat with upright high-back support
Back support	Continuous padded high back supports thoracic and upper shoulder area
Arm support	Boxed upholstered arms with flat wood caps provide forearm and cup-rest surfaces
Cushion retention	Permanent fixed seat cushion with sewn front face and concealed attachment
Base stability	Four-sided plinth distributes load without rocking or caster movement
Surface utility	Arm caps provide 170 x 620 mm hard resting areas for cups or documents while keeping the seat bay open
Arrangement flexibility	Straight square design permits face-to-face visitor pairing or parallel lounge layouts
Maintenance access	Non-removable upholstered panels require surface wiping and professional cleaning if fully bonded
Adjustment mechanism	No tilt, height, swivel, or footrest adjustment; fixed ergonomic posture at 430 mm seat height
Floor protection	Low glide feet enable repositioning while limiting direct plinth abrasion
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive visitor office	Place one or two chairs in front of an executive desk for formal guest seating
VIP reception lounge	Pair two chairs with a central tea table for short meetings and hosted visitors
Government or institutional meeting room	Use in formal interview, meeting, or protocol rooms requiring a neat fixed seat
Hotel lobby seating cluster	Combine multiple chairs along quiet lobby zones for durable individual seating
Corporate waiting area	Arrange along walls or around low tables for visitors awaiting appointments
Conference breakout zone	Use for semi-formal discussion areas where task mobility and recline are unnecessary
Recommended companion furniture	Pair with a 600 x 600 x 550 mm dark wood side table and matching cream seating
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Contract seating strength	EN 16139:2013 applies to non-domestic seating strength, durability, and safety
Seat and back durability	EN 1728:2012 provides test methods for strength and durability loading
Stability test method	EN 1022:2018 applies to seating stability testing
Upholstered furniture ignitability	EN 1021:2014 applies to smouldering-cigarette ignition resistance
Furniture safety dimensions	EN 1335:2018 may be used selectively for office seating safety concepts

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Lounge seating safety	ANSI/BIFMA E3:2021 applies to lounge and public-area seating safety and durability
Static and cyclic loads	ANSI/BIFMA E3:2021 back, seat, arm, and leg load tests may be specified for commercial verification
Stability verification	ANSI/BIFMA E3:2021 stability methods apply to forward, rearward, and side-tipping risk
VOC emissions option	ANSI/BIFMA e2019Furniture Sustainability Standard may be specified for VOC and material attributes

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture structural safety	GB/T 10357.2:2013 applies to chair and stool strength and durability acceptance tests
Furniture stability	GB/T 10357.3:2013 applies to chair and stool stability evaluation
Upholstered furniture durability	GB/T 27904:2011 applies to hardness and durability assessment of upholstered seating foam
Formaldehyde emission control	GB 18584:2001 applies to indoor wooden furniture formaldehyde emission limits
Upholstered furniture fire safety	GB 17927.1:2011 applies to combustion behavior of upholstered furniture components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture structural safety：GB/T 10357.2:2013 applies to chair and stool strength and durability acceptance tests；
2. Furniture stability：GB/T 10357.3:2013 applies to chair and stool stability evaluation；
3. Upholstered furniture durability：GB/T 27904:2011 applies to hardness and durability assessment of upholstered seating foam；
4. Formaldehyde emission control：GB 18584:2001 applies to indoor wooden furniture formaldehyde emission limits；
5. Upholstered furniture fire safety：GB 17927.1:2011 applies to combustion behavior of upholstered furniture components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RC-ARM-900-CREAM-WOOD

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RC-ARM-900-CREAM-WOOD

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RC-ARM-900-CREAM-WOOD打开导出工具

页面快速操作

发布采购询价

产品描述

The Cream Upholstered Reception Armchair with Wood Arm Caps is a fixed single-seat lounge chair designed for formal reception, visitor, and waiting environments. Its straight square form features an upright high back, broad upholstered arm boxes, and a four-sided dark brown plinth, producing a neat, grounded silhouette without rocking motion or casters. Cream leather-look upholstery with sewn boxed panels gives the chair a refined appearance, while reddish-brown wood arm caps and the dark lower platform add contrast and a structured accent. Comfort is supported by a permanent fixed seat cushion finished with a sewn front face and concealed attachment. The seat uses high-resilience polyurethane foam over a supporting deck, with a finished cushion thickness of 90 mm. The shaped back cushion has a rounded rolled top, 70 mm finished padding, and a continuous high-back profile intended to support the thoracic and upper shoulder area. A 240 mm lumbar support zone and a 540 mm clear width between the armrests help maintain an upright, accommodating posture. The chair is built on a reinforced internal frame using 40 mm hardwood or engineered-wood structural rails, steel screws, corner blocks, and adhesive-bonded upholstery joints. Seat support is provided by a 12 mm composite board or webbed suspension platform. The arm assemblies combine upholstered timber-composite boxes with 25 mm polished reddish-brown wood veneer or laminated wood-composite caps, while the lower plinth uses dark brown wood-composite with a stain or laminate finish. Published material details include 35 kg/m3 seat foam density, 28 kg/m3 back foam density, 40 percent foam rebound, and upholstery acceptance to 50,000 abrasion cycles. The chair is rated for a 160 kg occupant load and has a 38 kg net weight. Functionally, the flat arm caps offer hard resting areas for cups or documents while preserving an open seat bay. The fixed design suits spaces where mobility and recline are unnecessary, and the square profile allows face-to-face visitor pairing or parallel lounge arrangements. Appropriate settings include executive offices, VIP reception lounges, government or institutional meeting rooms, hotel lobbies, corporate waiting areas, and conference breakout zones. Procurement teams should note the unbranded RC-ARM-900-CREAM-WOOD model designation, fixed cushion construction, two-carton packaging, and 40-minute reference assembly time when planning delivery, storage, and installation.

Cream Upholstered Reception Armchair with Wood Arm Caps Specifications

供应商与现货