纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	980 × 880 × 880 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Single armchair net weight	38 kg
Per-chair recommended user weight	160 kg
Side table distributed top load	40 kg
Seating capacity	1 person per chair
Set seating capacity	2 persons
Seat foam density target	35 kg/m3
Back foam density target	28 kg/m3
Fabric abrasion acceptance target	30,000 Martindale cycles
Expected frame static-load verification	1,200 N vertical seat load
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer structural frame	Dark reddish-brown finished wood or veneered engineered wood with rectangular side rails
Front and rear support rails	Stained timber framing with recessed plinth detail and block feet
Seat cushion	Cream upholstered cushion over 120 mm high-resilience foam on a structural seat board
Back cushion	Cream upholstered upright cushion over 100 mm medium-density foam
Arm pads	Cream upholstered padding integrated into squared arm enclosures
Side panels	Cream upholstered panels enclosed by the timber outer frame
Upholstery surface	Cream woven fabric or leather-look coated material, 1.0 mm minimum face thickness
Seat support board	15 mm structural plywood or hardwood board target
Internal frame stock	30 x 50 mm hardwood or engineered timber rail target
Feet	Reddish-brown solid wood block feet, four per chair
Side table	Matching stained timber or veneered board top, apron, and four square legs
Fasteners and corner blocks	Steel screws, brackets, and timber corner blocks for fixed joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed upright single-person reception seat with integrated back and arm support
Arm support	Full-length padded arms connected to front and rear wood posts
Back support	Non-reclining vertical back cushion suited to formal short-duration meetings
Pairing layout	Two chairs face the same conversation direction with a central shared side table
Side table use	Fixed four-leg table supports a vase, cups, documents, or personal items
Floor protection	Block feet lift the lower frame 70 mm and can accept felt pads for hard floors
Cushion service design	Removable-upholstery or zippered cushion construction should be requested for cleaning access
Assembly method	Frame and cushions are intended for stationary placement, with table legs or apron attached on site
Block foot height	70 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packed pieces for displayed set	6 pieces: 2 chair frames, 2 cushion packs, 1 table top, 1 leg and hardware pack
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive reception room	Suitable for VIP visitor rooms where a formal symmetrical two-chair conversation layout is required
Government or institutional waiting area	Appropriate for quiet waiting zones needing durable fixed seating and conservative cream upholstery
Corporate meeting lounge	Can be arranged in pairs along walls or opposite a sofa for short visitor discussions
Hotel club floor	Suitable for lounge corners that require a wood-accent residential look with commercial seating support
Senior office anteroom	Fits beside an executive desk area for one-to-one guest seating without casters or recline controls
Recommended table placement	Place the 650 mm table centrally between chairs to keep both seats reachable and preserve a 650 mm conversation gap
Cleaning consideration	Specify commercial-cleanable cream upholstery because light-colored surfaces show soiling in public reception areas
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Upholstered furniture strength	EN 16139:2013 strength, durability, and safety for non-domestic seating
Furniture surface safety	EN 15185:2018 assessment of surface resistance to abrasion for furniture surfaces
Formaldehyde emissions	EN 13986 wood-based panels for construction use

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture safety applicability	GB/T 3324 general technical requirements for wooden furniture
Formal furniture dimensional basis	GB/T 3326furniture dimensional inspection
Upholstered furniture safety	GB/T 31439 general technical requirements for upholstered furniture
Fabric safety applicability	GB 18401textile basic safety technical specification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture safety applicability：GB/T 3324 general technical requirements for wooden furniture；
2. Formal furniture dimensional basis：GB/T 3326furniture dimensional inspection；
3. Upholstered furniture safety：GB/T 31439 general technical requirements for upholstered furniture；
4. Fabric safety applicability：GB 18401textile basic safety technical specification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RC-ARM-980-WT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RC-ARM-980-WT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RC-ARM-980-WT打开导出工具

页面快速操作

发布采购询价

产品描述

The Cream Upholstered Wood-Framed Reception Armchairs with Side Table, model RC-ARM-980-WT, presents a formal two-seat reception arrangement with a traditional residential character. The set includes two fixed upright armchairs and a central timber side table. Both chairs face the same conversation direction, creating a symmetrical layout suited to quiet visitor meetings and organized waiting environments. Cream upholstery is framed by a dark reddish-brown wood or veneered engineered-wood structure with rectangular side rails, squared arm enclosures, recessed plinth detailing, and solid block feet. The matching four-leg table sits between the chairs and supports items such as a vase, cups, documents, or personal belongings. Each chair is built around a stained timber frame with front and rear support posts and block feet. The target internal frame uses hardwood or engineered timber rails, while the seat rests on a structural plywood or hardwood board. The seat cushion combines cream upholstery with high-resilience foam over a structural seat board; the finished cushion thickness is 90 mm. The upright, non-reclining back cushion has 70 mm of finished padding and includes a defined lumbar support zone. Integrated padded arm pads run between the front and rear wood posts, and cream-upholstered side panels sit within the timber outer frame. Upholstery is offered in cream woven fabric or a leather-look coated material with a minimum face thickness of 1.0 mm. Designed for one person per chair, the pair accommodates two people and offers arm, back, and lumbar support for short-duration seating. The fixed design has no casters or recline controls, contributing to a tidy, conservative appearance. The block feet lift the lower frame by 70 mm and can accept felt pads for hard-floor protection. The side table has a distributed top load rating of 40 kg, while each chair is recommended for a user weight of 160 kg. The clear width between armrests is 540 mm. This reception set is suitable for executive and VIP visitor rooms, government or institutional waiting areas, corporate meeting lounges, hotel club floors, and senior office anterooms. It can be paired along a wall, placed opposite a sofa, or used beside an executive desk for one-to-one guest seating. For balanced access, the 650 mm table should be positioned centrally between the chairs with a 650 mm conversation gap. Procurement teams should note the unbranded product is supplied as one set in two cartons, with chair frames, cushion packs, the table top, and a leg and hardware pack. The reference assembly time is 40 minutes per set. For cleaning access, removable-upholstery or zippered cushion construction should be specifically requested at order stage.

Cream Upholstered Wood-Framed Reception Armchairs with Side Table Specifications

供应商与现货