纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1020 × 1020 × 720 mm
Overall table dimensions	1020 x 1020 x 720 mm
Central table umbrella hole diameter	60 mm
Chair seat height above ground	460 mm
Chair seat usable area	500 x 500 mm
Chair backrest height above seat	493 mm
Armrest height above seat	200 mm
Cushion thickness	50 mm
Leg footprint spread per chair	500 x 500 mm
Table apron clearance under tabletop	650 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Full set total net weight	95 kg
Single chair static weight capacity	180 kg
Tabletop static weight capacity	91 kg
Powder coating salt spray resistance	1000 hours
Outdoor fabric UV fade resistance	500 hours
Seating capacity	4 adults
Cushion water repellency rating	Class 4
Frame warranty period	3 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Table and chair frame	Cast aluminum alloy with white outdoor-grade powder coating
Cushion cover fabric	Solution-dyed polyester outdoor performance fabric
Cushion core	High-density polyurethane foam with drainage holes
Assembly hardware	304 stainless steel bolts and nuts
Foot levelers	Reinforced nylon adjustable pads
Tabletop construction	One-piece cast aluminum lattice panel with raised rolled edge
Chair backrests	Cast aluminum lattice openwork panels with ornate scroll detailing
Armrests	Curved integrated cast aluminum armrests with smooth rounded edges
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Central umbrella hole	Accommodates standard patio umbrella poles with removable cap
Adjustable foot levelers	Threaded design on each leg adjusts 10mm vertical travel
Cushion fastening system	Fabric ties at each cushion corner secure pads to chair frames
Knock-down assembly	All components flat-packed for shipment with included hex key hardware
Weather-resistant design	Open lattice construction allows air flow and water drainage
Stackable chair storage	Chairs stack to 4 units high for off-season storage
Table underframe cross bracing	Welded aluminum support bars connect all four legs
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio and deck use	Ideal for home backyards, garden terraces and balcony dining areas
Hospitality outdoor seating	Suitable for café, bistro and boutique hotel al fresco dining areas
Four-person casual dining configuration	Square table shape enables equal conversation access for all users
Coastal installation suitability	Cast aluminum construction resists salt air corrosion better than steel frames
Seasonal use in temperate climates	Can remain outdoors year-round in areas with light frost
Umbrella-compatible setup	Central hole accepts standard market umbrellas for sun protection

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 581-1:2017	Safety and structural strength requirements for outdoor seating and tables
EN 581-2:2019	Mechanical safety test methods for outdoor domestic and contract furniture

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4-2022	Structural durability standard applicable for outdoor lounge and dining seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements applicable to metal outdoor dining furniture
GB/T 17657-2013	Surface coating adhesion and durability test method for metal furniture finishes
GB 18584-2001	Indoor decoration material limited harmful substances for wooden furniture, applicable for cushion foam testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements applicable to metal outdoor dining furniture；
2. GB/T 17657-2013：Surface coating adhesion and durability test method for metal furniture finishes；
3. GB 18584-2001：Indoor decoration material limited harmful substances for wooden furniture, applicable for cushion foam testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OD-CA-5PC-WH-GR-SQ

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OD-CA-5PC-WH-GR-SQ

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OD-CA-5PC-WH-GR-SQ打开导出工具

页面快速操作

发布采购询价

产品描述

This 5-Piece White Cast Aluminum Outdoor Patio Dining Set with Green Cushions delivers traditional ornate styling built for durable outdoor use, configured as a square dining set with 4 adult seats. The white powder-coated cast aluminum frames feature intricate lattice openwork across the one-piece tabletop and chair backrests, accented with scroll detailing, smooth rounded integrated curved armrests, and a raised rolled edge on the table surface. The open lattice design supports natural air flow and water drainage, while complementary weather-resistant green seat cushions add soft, inviting contrast to the crisp white frame finish. Each table and chair leg is fitted with reinforced nylon adjustable foot levelers that offer 10mm vertical travel to stabilize the set on uneven surfaces. The frames are constructed from cast aluminum alloy finished with outdoor-grade white powder coating that provides 1000 hours of salt spray resistance, paired with 304 stainless steel assembly hardware and welded aluminum cross bracing under the table to connect all four legs for structural rigidity. The solution-dyed polyester cushion covers offer 500 hours of UV fade resistance and hold a Class 4 water repellency rating, encasing high-density polyurethane foam cores with built-in drainage holes. Each cushion fastens to chair frames via fabric ties at every corner to prevent shifting. The table includes a central 60mm umbrella hole with a removable cap to fit standard patio umbrella poles for sun protection. Chairs stack up to 4 units high for compact off-season storage, and all components ship flat-packed across 2 cartons, with included hex key hardware supporting a 40-minute assembly per set. The set supports a static weight capacity of 180kg per single chair and 91kg for the tabletop, with an overall net weight of 95kg for the full set. This dining set fits residential patios, backyards, garden terraces and balcony dining spaces, as well as hospitality al fresco areas for cafes, bistros and boutique hotels. Its cast aluminum construction offers superior salt air corrosion resistance compared to steel frames, making it suitable for coastal installations, and it can remain outdoors year-round in temperate climates with light frost. Procurement teams should note the packaged gross weight of 120kg per set and 0.8m³ packaging volume for shipping planning, and confirm that major joints use a minimum of 2 fixing points with M6 to M10 connectors during assembly to ensure long-term structural stability.

5-Piece White Cast Aluminum Outdoor Patio Dining Set with Green Cushions Specifications

供应商与现货