| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1020 x 1020 x 720 mm | |
|---|---|---|
| Central table umbrella hole diameter | 60 mm | |
| Chair overall dimensions | 580 x 580 x 953 mm | |
| Chair seat height above ground | 460 mm | |
| Chair seat usable area | 500 x 500 mm | |
| Chair backrest height above seat | 493 mm | |
| Armrest height above seat | 200 mm | |
| Cushion thickness | 50 mm | |
| Leg footprint spread per chair | 500 x 500 mm | |
| Table apron clearance under tabletop | 650 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Full set total net weight | 95 kg | |
|---|---|---|
| Single chair static weight capacity | 180 kg | |
| Tabletop static weight capacity | 91 kg | |
| Powder coating salt spray resistance | 1000 hours | |
| Outdoor fabric UV fade resistance | 500 hours | |
| Seating capacity | 4 adults | |
| Cushion water repellency rating | Class 4 | |
| Frame warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | Cast aluminum alloy with white outdoor-grade powder coating | |
|---|---|---|
| Cushion cover fabric | Solution-dyed polyester outdoor performance fabric | |
| Cushion core | High-density polyurethane foam with drainage holes | |
| Assembly hardware | 304 stainless steel bolts and nuts | |
| Foot levelers | Reinforced nylon adjustable pads | |
| Tabletop construction | One-piece cast aluminum lattice panel with raised rolled edge | |
| Chair backrests | Cast aluminum lattice openwork panels with ornate scroll detailing | |
| Armrests | Curved integrated cast aluminum armrests with smooth rounded edges | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Central umbrella hole | Accommodates standard patio umbrella poles with removable cap | |
|---|---|---|
| Adjustable foot levelers | Threaded design on each leg adjusts 10mm vertical travel | |
| Cushion fastening system | Fabric ties at each cushion corner secure pads to chair frames | |
| Knock-down assembly | All components flat-packed for shipment with included hex key hardware | |
| Weather-resistant design | Open lattice construction allows air flow and water drainage | |
| Stackable chair storage | Chairs stack to 4 units high for off-season storage | |
| Table underframe cross bracing | Welded aluminum support bars connect all four legs | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio and deck use | Ideal for home backyards, garden terraces and balcony dining areas | |
|---|---|---|
| Hospitality outdoor seating | Suitable for café, bistro and boutique hotel al fresco dining areas | |
| Four-person casual dining configuration | Square table shape enables equal conversation access for all users | |
| Coastal installation suitability | Cast aluminum construction resists salt air corrosion better than steel frames | |
| Seasonal use in temperate climates | Can remain outdoors year-round in areas with light frost | |
| Umbrella-compatible setup | Central hole accepts standard market umbrellas for sun protection |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety and structural strength requirements for outdoor seating and tables | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety test methods for outdoor domestic and contract furniture |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2022 | Structural durability standard applicable for outdoor lounge and dining seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to metal outdoor dining furniture | |
|---|---|---|
| GB/T 17657-2013 | Surface coating adhesion and durability test method for metal furniture finishes | |
| GB 18584-2001 | Indoor decoration material limited harmful substances for wooden furniture, applicable for cushion foam testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to metal outdoor dining furniture; 2. GB/T 17657-2013: Surface coating adhesion and durability test method for metal furniture finishes; 3. GB 18584-2001: Indoor decoration material limited harmful substances for wooden furniture, applicable for cushion foam testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
