纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 760 mm
Overall set footprint (arranged for use)	1900 x 1900 x 910 mm
Round tabletop diameter	900 mm
Table overall height	760 mm
Table umbrella hole diameter	50 mm
Table lower circular support ring height	280 mm
Chair seat height (top of slats to deck)	450 mm
Chair seat usable dimensions	450 x 420 mm
Chair backrest height (seat surface to top of back)	460 mm
Chair armrest height (top of arm to deck)	660 mm
Minimum clearance around set required for access	900 mm
Slat width (table and chair surfaces)	40 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table top static load capacity	100 kg
Per-chair static weight capacity	136 kg
Net weight of complete set	55 kg
Seating capacity	4 adults
Frame corrosion resistance rating	500 hours salt spray
Slat surface UV fade resistance	1000 hours exposure
Structural racking resistance	1000 cycle side load test
Surface static friction coefficient	0.6
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Table and chair frame construction	1.2 mm thick carbon steel with black e-coat primer and polyester powder coat finish
Tabletop slats	20 mm thick weather-resistant WPC composite faux wood, wood-grain textured surface
Chair seat and back slats	20 mm thick matching WPC composite faux wood, horizontally aligned for drainage
Integrated chair armrests	20 mm thick WPC slat mounted to steel arm supports
Table leg bracing	1.5 mm thick steel circular lower ring and vertical center support struts
Umbrella hole fitting	Reinforced steel rim with plastic insert cap included
Foot contact pads	Non-marking polyethylene glides at base of all legs
Hardware kit	Stainless steel 304 bolts and nuts for assembly
Surface finish (metal components)	Matte black textured powder coat, no sharp edges
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Umbrella compatibility	Accepts standard 48 mm diameter patio umbrella poles through central table hole
Surface drainage	10 mm gaps between all horizontal slats direct rainwater off surfaces
Chair design	Fixed stationary frame with no folding, recline or swivel function
Assembly requirement	Knock-down assembly with included hex key and hardware
Maintenance requirement	Wipe clean with damp cloth and mild detergent, no sealing or oiling required
Weight distribution	Four curved table legs transfer load evenly to deck surface
Armrest utility	Wide flat armrests support drinks and small items in addition to arm rest
Stacking capability	Chairs do not stack for storage, fixed rigid frame design
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential patio and deck dining	Ideal for backyard, balcony or garden spaces, weather-resistant for permanent outdoor placement
Commercial outdoor cafe seating	Suitable for coffee shop, bistro or restaurant terrace use, durable low-maintenance construction
Small outdoor gathering use	Accommodates 4 adults for meals, drinks or casual conversation around central table
Covered or uncovered outdoor installation	Performs in sun and light rain, no indoor storage required between uses
Matching accessory recommendation	Pair with standard market umbrella and optional weather-resistant seat cushions for added comfort
Surface compatibility	Suitable for installation on wood deck, tile, concrete or stone patio surfaces with level adjustment
Climate suitability	Performs in humid, coastal or high-UV climates with rust-resistant frame and fade-resistant slats
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use - General safety requirements	Applicable for structural load and safety verification
EN 581-2:2019 Outdoor furniture - Mechanical safety requirements for seating	Applicable for chair static load and durability testing
EN 581-3:2019 Outdoor furniture - Mechanical safety requirements for tables	Applicable for table stability and load capacity verification

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for wooden furniture	Applicable for WPC slat dimensional stability and surface qualityAcceptance inspection
GB/T 24821-2009 Outdoor furniture general safety requirements	Applicable for structural stability and sharp edge compliance
GB/T 17657-2013 Test methods for evaluating surface finish durability	Applicable for coating abrasion and corrosion resistance testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for wooden furniture：Applicable for WPC slat dimensional stability and surface qualityAcceptance inspection；
2. GB/T 24821-2009 Outdoor furniture general safety requirements：Applicable for structural stability and sharp edge compliance；
3. GB/T 17657-2013 Test methods for evaluating surface finish durability：Applicable for coating abrasion and corrosion resistance testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · PDS-RD90-4CH-BLKWPC

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · PDS-RD90-4CH-BLKWPC

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · PDS-RD90-4CH-BLKWPC打开导出工具

页面快速操作

发布采购询价

产品描述

This 5-piece round weather-resistant patio dining set delivers a cohesive, functional outdoor seating solution centered on a circular table paired with four matching armchairs, arranged to create an intimate, symmetrical dining footprint suited to compact outdoor areas. The set features a unified matte black finished steel framework paired with wood-grain textured WPC faux wood slats, creating a balanced visual profile that blends modern metal durability with the warm, natural look of wood without the upkeep demands of solid timber. All horizontal slats across table tops, chair seats and chair backs are aligned with consistent gaps, and integrated wide WPC armrests extend smoothly from each chair’s frame for a streamlined, uncluttered appearance. Constructed for long-term outdoor use, the set’s frames are built from carbon steel treated with an e-coat primer and textured matte black polyester powder coat, with no sharp edges on finished metal components. Table stability is reinforced by a lower circular steel support ring and central vertical struts connecting to four curved legs that distribute weight evenly across installation surfaces. All slats for the tabletop, chair seats, chair backs and armrests are 20mm thick weather-resistant WPC composite, with chair slats oriented horizontally to support water runoff. Assembly uses 304 stainless steel hardware, with non-marking polyethylene glides fitted to the base of every leg to protect flooring surfaces. The table includes a centrally located umbrella hole fitted with a reinforced steel rim and plastic insert cap, sized to accept standard patio umbrella poles. Functionally, the set seats four adults, with fixed, stationary chair frames that offer stable, rigid seating without folding, reclining or swivel mechanisms. Gaps between all horizontal slats direct rainwater off surfaces to prevent standing water, and the WPC surfaces require only simple wiping with a damp cloth and mild detergent for upkeep, with no sealing or oiling needed. Wide, flat armrests on each chair provide space to rest drinks or small personal items alongside arm support, and the central umbrella hole allows users to add shade with a standard market umbrella. The set requires knock-down assembly with the included hex key and hardware. This dining set works equally well for residential and light commercial outdoor spaces: it is ideal for residential backyards, balconies, and garden patios, as well as for commercial cafe, bistro, or restaurant terrace seating. It is rated for permanent outdoor placement in both covered and uncovered locations, performing reliably in sun and light rain without requiring indoor storage between uses, and can be installed on level wood decks, tile, concrete, or stone patio surfaces. For procurement, note that the set ships across two cartons per unit, with straightforward assembly that can be completed in roughly 40 minutes per set. Optional weather-resistant seat cushions can be paired with the chairs for enhanced comfort, and the fixed-frame, low-maintenance design supports high-frequency use with minimal ongoing upkeep. The full set has a manageable net weight for placement and repositioning, with standardized dimensions that support efficient bulk shipping and storage for commercial project orders.

5-Piece Round Weather-Resistant Patio Dining Set Specifications

供应商与现货