| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (arranged for use) | 1900 x 1900 x 910 mm | |
|---|---|---|
| Round tabletop diameter | 900 mm | |
| Table overall height | 760 mm | |
| Table umbrella hole diameter | 50 mm | |
| Table lower circular support ring height | 280 mm | |
| Chair overall dimensions (per unit) | 600 x 580 x 910 mm | |
| Chair seat height (top of slats to deck) | 450 mm | |
| Chair seat usable dimensions | 450 x 420 mm | |
| Chair backrest height (seat surface to top of back) | 460 mm | |
| Chair armrest height (top of arm to deck) | 660 mm | |
| Minimum clearance around set required for access | 900 mm | |
| Slat width (table and chair surfaces) | 40 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Table top static load capacity | 100 kg | |
|---|---|---|
| Per-chair static weight capacity | 136 kg | |
| Net weight of complete set | 55 kg | |
| Seating capacity | 4 adults | |
| Frame corrosion resistance rating | 500 hours salt spray | |
| Slat surface UV fade resistance | 1000 hours exposure | |
| Structural racking resistance | 1000 cycle side load test | |
| Surface static friction coefficient | 0.6 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame construction | 1.2 mm thick carbon steel with black e-coat primer and polyester powder coat finish | |
|---|---|---|
| Tabletop slats | 20 mm thick weather-resistant WPC composite faux wood, wood-grain textured surface | |
| Chair seat and back slats | 20 mm thick matching WPC composite faux wood, horizontally aligned for drainage | |
| Integrated chair armrests | 20 mm thick WPC slat mounted to steel arm supports | |
| Table leg bracing | 1.5 mm thick steel circular lower ring and vertical center support struts | |
| Umbrella hole fitting | Reinforced steel rim with plastic insert cap included | |
| Foot contact pads | Non-marking polyethylene glides at base of all legs | |
| Hardware kit | Stainless steel 304 bolts and nuts for assembly | |
| Surface finish (metal components) | Matte black textured powder coat, no sharp edges | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Umbrella compatibility | Accepts standard 48 mm diameter patio umbrella poles through central table hole | |
|---|---|---|
| Surface drainage | 10 mm gaps between all horizontal slats direct rainwater off surfaces | |
| Chair design | Fixed stationary frame with no folding, recline or swivel function | |
| Assembly requirement | Knock-down assembly with included hex key and hardware | |
| Maintenance requirement | Wipe clean with damp cloth and mild detergent, no sealing or oiling required | |
| Weight distribution | Four curved table legs transfer load evenly to deck surface | |
| Armrest utility | Wide flat armrests support drinks and small items in addition to arm rest | |
| Stacking capability | Chairs do not stack for storage, fixed rigid frame design | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio and deck dining | Ideal for backyard, balcony or garden spaces, weather-resistant for permanent outdoor placement | |
|---|---|---|
| Commercial outdoor cafe seating | Suitable for coffee shop, bistro or restaurant terrace use, durable low-maintenance construction | |
| Small outdoor gathering use | Accommodates 4 adults for meals, drinks or casual conversation around central table | |
| Covered or uncovered outdoor installation | Performs in sun and light rain, no indoor storage required between uses | |
| Matching accessory recommendation | Pair with standard market umbrella and optional weather-resistant seat cushions for added comfort | |
| Surface compatibility | Suitable for installation on wood deck, tile, concrete or stone patio surfaces with level adjustment | |
| Climate suitability | Performs in humid, coastal or high-UV climates with rust-resistant frame and fade-resistant slats | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use - General safety requirements | Applicable for structural load and safety verification | |
|---|---|---|
| EN 581-2:2019 Outdoor furniture - Mechanical safety requirements for seating | Applicable for chair static load and durability testing | |
| EN 581-3:2019 Outdoor furniture - Mechanical safety requirements for tables | Applicable for table stability and load capacity verification |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable for WPC slat dimensional stability and surface qualityAcceptance inspection | |
|---|---|---|
| GB/T 24821-2009 Outdoor furniture general safety requirements | Applicable for structural stability and sharp edge compliance | |
| GB/T 17657-2013 Test methods for evaluating surface finish durability | Applicable for coating abrasion and corrosion resistance testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable for WPC slat dimensional stability and surface qualityAcceptance inspection; 2. GB/T 24821-2009 Outdoor furniture general safety requirements: Applicable for structural stability and sharp edge compliance; 3. GB/T 17657-2013 Test methods for evaluating surface finish durability: Applicable for coating abrasion and corrosion resistance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
