| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall assembled dimension (2 modules) | 2400 x 700 x 450 mm | |
|---|---|---|
| Single seat module dimension | 1200 x 700 x 450 mm | |
| Seat cushion thickness | 120 mm | |
| X-shaped divider height above seat | 300 mm | |
| Seat surface depth (front to divider) | 420 mm | |
| X-divider arm width | 90 mm | |
| Base height from floor to seat bottom | 80 mm | |
| Seat width per user (per side of divider) | 550 mm | |
| X-divider total span along seat length | 1100 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Suggested seating capacity (2-unit set) | 4 persons | |
|---|---|---|
| Suggested static seat load per seat | 150 kg | |
| unit weight per module | 35 kg | |
| Foam indentation load deflection (ILD) reference | 45 N | |
| Upholstery abrasion resistance reference (Martindale) | 50000 cycles | |
| Total unit weight (2-module set) | 70 kg | |
| Seat impact resistance reference | 10000 cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat base frame | Plywood and solid wood internal frame, fully upholstered | |
|---|---|---|
| Seat padding | High-density polyurethane foam core with upper comfort layer | |
| X-divider construction | Foam-padded divider with rigid internal core, fully upholstered | |
| Upholstery fabric | Woven polyester-blend upholstery fabric, stitched seams | |
| Base support feet | Low-profile plastic glides recessed under base corners | |
| Module connection | Concealed inter-module connector system | |
| Seam construction | Lock-stitched upholstery seams at cushion edges | |
| Base bottom panel | 9mm MDF panel upholstered on vertical sides, non-woven fabric dust cover on underside | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Modular reconfiguration | Multiple identical 1200 mm modules can be joined in straight rows or combined with matching units | |
|---|---|---|
| Central X divider | Four-arm padded divider separates two seating positions per module and provides lateral torso support | |
| Low-profile lounge seating | 450 mm seat height designed for informal waiting, breakout and public rest areas | |
| Floor protection | Recessed plastic glides under each module base protect hard flooring and allow sliding repositioning | |
| Two-tone color option | Contrasting seat and divider upholstery available as shown in brown/lime and lime/brown schemes | |
| All-round upholstered finish | Front, side and rear faces fully upholstered, suitable for island placement in open spaces | |
| Two-tone upholstery configuration | Contrasting seat and divider upholstery offered in brown/lime and lime/brown fabric schemes | |
| 360-degree island placement | Front, side and rear faces fully upholstered with no exposed structural panels | |
| Integrated armrest support | Outer arms of X-divider provide 300mm high padded forearm and torso support for seated users | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Reference carton dimension per module | 1250 x 750 x 500 mm | |
|---|---|---|
| Reference gross weight per module carton | 40 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
推荐空间 / 目标用户 / 使用方式
| Airport and transit waiting lounges | Suitable for high-traffic public waiting areas where modular layout and seated separation are desired | |
|---|---|---|
| Office building reception and breakout zones | Appropriate for corporate lobbies, staff rest areas and informal meeting points | |
| Shopping mall and retail rest areas | Useful for shopper relaxation zones configured in straight rows or grouped islands | |
| Educational campus common spaces | Suitable for university lobbies, library breakout areas and student lounges | |
| Healthcare facility waiting rooms | Applicable for outpatient and clinic waiting areas where cleanable upholstery and seated separation are valued | |
| Exhibition and event venue temporary seating | Suitable for trade show lounges, conference break areas and temporary visitor zones | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
欧洲市场准入与化学品要求
| EN 16139:2013 | Applicable standards and test results require confirmation | |
|---|---|---|
| EN 1021-1/2 | Applicable for upholstery fabric cigarette and match flame resistance assessment for contract environments |
美国及加拿大办公家具标准
| ANSI/BIFMA X5.4-2020 | Applicable for lounge and public seating performance testing reference when specifying for North American contracts | |
|---|---|---|
| BIFMA e3-2020 | Applicable as sustainability and emissions reference for commercial seating procurement evaluation |
适用于中国市场项目的标准
| GB 28007-2011 | Applicable for public furniture flammability performance evaluation if targeting Chinese public buildings | |
|---|---|---|
| GB/T 3324-2017 | Applicable for wood-based interior furniture physical and mechanical properties inspection reference | |
| GB/T 28008-2011 | Applicable for glass-free public furniture structural strength and stability assessment |
本产品须满足以下技术参数要求： 1. GB 28007-2011：Applicable for public furniture flammability performance evaluation if targeting Chinese public buildings； 2. GB/T 3324-2017：Applicable for wood-based interior furniture physical and mechanical properties inspection reference； 3. GB/T 28008-2011：Applicable for glass-free public furniture structural strength and stability assessment； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The KERTE Modular X-Divider Public Wting Bench (model WB-XMOD-2400) is a modular public seating bench designed for flexible, user-separated wting arrangements across commercial and public spaces. The 2-unit set provides four total seats, assembled from two identical 1200mm seat modules joined via a concealed inter-module connection system. Visual form and layout are defined by a central X-shaped padded divider within each module, which splits the bay into two individual seating positions and creates a distinct two-tone aesthetic when ordered in contrasting brown/lime or lime/brown upholstery schemes. All front, side, and rear faces are fully upholstered with no exposed structural panels, enabling 360-degree island placement in open circulation areas. The bench sits on a low-profile plinth base with recessed contact points, creating a streamlined, uncluttered silhouette suited to modern interior designs. Construction relies on a plywood and solid wood internal seat frame, padded with high-density polyurethane foam with an upper comfort layer, and covered in woven polyester-blend upholstery fabric with lock-stitched seams at cushion edges. The X-divider features a rigid internal core wrapped in foam and full upholstery, while low-profile plastic glides recessed under each base corner protect hard flooring surfaces and support gentle repositioning. The underside of the base includes a non-woven fabric dust cover. Practical functions include modular reconfiguration, as multiple matching 1200mm modules can be joined in strght rows or pred with complementary units to adapt to changing floor plans. The fixed X-divider delivers lateral torso and forearm support for seated users, while the 450mm seat height is calibrated for informal, short to medium duration use rather than task-focused seating. Pre-configured two-tone color options are set at the factory, with no on-site color adjustment avlable. The bench is suited for a range of spaces including rport and transit wting lounges, office building reception and breakout zones, shopping mall rest areas, educational campus common spaces, healthcare facility wting rooms, and exhibition or event venue temporary seating areas. Its fully upholstered sides allow freestanding island placement away from walls, making it versatile for both perimeter and open-plan layouts. Key procurement considerations include confirmation of wood species and board grade for the internal frame, foam density and layer thickness specifications, X-divider core material and fastening method, textile fiber composition and fire-retardant finish detls, and the specific locking mechanism and alignment hardware for module connections. For clinical healthcare settings, buyers must verify that the upholstery meets medical-grade cleanability requirements prior to ordering. Module weight supports handling planning, while carton dimensions and assembly s serve as preliminary logistics references for project scheduling and freight coordination.
关注我们