Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 700 × 450 mm
Overall assembled dimension (2 modules)	2400 x 700 x 450 mm
Single seat module dimension	1200 x 700 x 450 mm
Seat cushion thickness	120 mm
X-shaped divider height above seat	300 mm
Seat surface depth (front to divider)	420 mm
X-divider arm width	90 mm
Base height from floor to seat bottom	80 mm
Seat width per user (per side of divider)	550 mm
X-divider total span along seat length	1100 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Suggested seating capacity (2-unit set)	4 persons
Suggested static seat load per seat	150 kg
unit weight per module	35 kg
Foam indentation load deflection (ILD) reference	45 N
Upholstery abrasion resistance reference (Martindale)	50000 cycles
Total unit weight (2-module set)	70 kg
Seat impact resistance reference	10000 cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat base frame	Plywood and solid wood internal frame, fully upholstered
Seat padding	High-density polyurethane foam core with upper comfort layer
X-divider construction	Foam-padded divider with rigid internal core, fully upholstered
Upholstery fabric	Woven polyester-blend upholstery fabric, stitched seams
Base support feet	Low-profile plastic glides recessed under base corners
Module connection	Concealed inter-module connector system
Seam construction	Lock-stitched upholstery seams at cushion edges
Base bottom panel	9mm MDF panel upholstered on vertical sides, non-woven fabric dust cover on underside
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Modular reconfiguration	Multiple identical 1200 mm modules can be joined in straight rows or combined with matching units
Central X divider	Four-arm padded divider separates two seating positions per module and provides lateral torso support
Low-profile lounge seating	450 mm seat height designed for informal waiting, breakout and public rest areas
Floor protection	Recessed plastic glides under each module base protect hard flooring and allow sliding repositioning
Two-tone color option	Contrasting seat and divider upholstery available as shown in brown/lime and lime/brown schemes
All-round upholstered finish	Front, side and rear faces fully upholstered, suitable for island placement in open spaces
Two-tone upholstery configuration	Contrasting seat and divider upholstery offered in brown/lime and lime/brown fabric schemes
360-degree island placement	Front, side and rear faces fully upholstered with no exposed structural panels
Integrated armrest support	Outer arms of X-divider provide 300mm high padded forearm and torso support for seated users
Recline Angle / Lock Reference	125° with 3 suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference carton dimension per module	1250 x 750 x 500 mm
Reference gross weight per module carton	40 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Airport and transit waiting lounges	Suitable for high-traffic public waiting areas where modular layout and seated separation are desired
Office building reception and breakout zones	Appropriate for corporate lobbies, staff rest areas and informal meeting points
Shopping mall and retail rest areas	Useful for shopper relaxation zones configured in straight rows or grouped islands
Educational campus common spaces	Suitable for university lobbies, library breakout areas and student lounges
Healthcare facility waiting rooms	Applicable for outpatient and clinic waiting areas where cleanable upholstery and seated separation are valued
Exhibition and event venue temporary seating	Suitable for trade show lounges, conference break areas and temporary visitor zones
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139:2013	Applicable standards and test results require confirmation
EN 1021-1/2	Applicable for upholstery fabric cigarette and match flame resistance assessment for contract environments

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.4-2020	Applicable for lounge and public seating performance testing reference when specifying for North American contracts
BIFMA e3-2020	Applicable as sustainability and emissions reference for commercial seating procurement evaluation

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB 28007-2011	Applicable for public furniture flammability performance evaluation if targeting Chinese public buildings
GB/T 3324-2017	Applicable for wood-based interior furniture physical and mechanical properties inspection reference
GB/T 28008-2011	Applicable for glass-free public furniture structural strength and stability assessment

Standardized tender description text

This product must meet the following technical requirements:
1. GB 28007-2011: Applicable for public furniture flammability performance evaluation if targeting Chinese public buildings;
2. GB/T 3324-2017: Applicable for wood-based interior furniture physical and mechanical properties inspection reference;
3. GB/T 28008-2011: Applicable for glass-free public furniture structural strength and stability assessment;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · WB-XMOD-2400

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · WB-XMOD-2400

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · WB-XMOD-2400Open Export Tool

Quick Actions

Post an RFQ

Product Description

The KERTE Modular X-Divider Public Waiting Bench (model WB-XMOD-2400) is a modular public seating bench designed for flexible, user-separated waiting arrangements across commercial and public spaces. The 2-unit set provides four total seats, assembled from two identical 1200mm seat modules joined via a concealed inter-module connection system. Visual form and layout are defined by a central X-shaped padded divider within each module, which splits the bay into two individual seating positions and creates a distinct two-tone aesthetic when ordered in contrasting brown/lime or lime/brown upholstery schemes. All front, side, and rear faces are fully upholstered with no exposed structural panels, enabling 360-degree island placement in open circulation areas. The bench sits on a low-profile plinth base with recessed contact points, creating a streamlined, uncluttered silhouette suited to modern interior designs. Construction relies on a plywood and solid wood internal seat frame, padded with high-density polyurethane foam with an upper comfort layer, and covered in woven polyester-blend upholstery fabric with lock-stitched seams at cushion edges. The X-divider features a rigid internal core wrapped in foam and full upholstery, while low-profile plastic glides recessed under each base corner protect hard flooring surfaces and support gentle repositioning. The underside of the base includes a non-woven fabric dust cover. Practical functions include modular reconfiguration, as multiple matching 1200mm modules can be joined in strght rows or paired with complementary units to adapt to changing floor plans. The fixed X-divider delivers lateral torso and forearm support for seated users, while the 450mm seat height is calibrated for informal, short to medium duration use rather than task-focused seating. Pre-configured two-tone color options are set at the factory, with no on-site color adjustment available. The bench is suited for a range of spaces including rport and transit waiting lounges, office building reception and breakout zones, shopping mall rest areas, educational campus common spaces, healthcare facility waiting rooms, and exhibition or event venue temporary seating areas. Its fully upholstered sides allow freestanding island placement away from walls, making it versatile for both perimeter and open-plan layouts. Key procurement considerations include confirmation of wood species and board grade for the internal frame, foam density and layer thickness specifications, X-divider core material and fastening method, textile fiber composition and fire-retardant finish details, and the specific locking mechanism and alignment hardware for module connections. For clinical healthcare settings, buyers must verify that the upholstery meets medical-grade cleanability requirements prior to ordering. Module weight supports handling planning, while carton dimensions and assembly s serve as preliminary logistics references for project scheduling and freight coordination.

Modular X-Divider Public Waiting Bench (2 Units, 4 Seats Total) Specifications

Suppliers and stock