| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
No parameter correction records exist. If you spot inaccurate data, click the flag icon at the end of the corresponding row to submit feedback. | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall assembled footprint | 3200 x 1400 x 900 mm | |
|---|---|---|
| Seat height (top of cushion to floor) | 450 mm | |
| Seat depth per module (front to back) | 700 mm | |
| Single straight seat module width | 700 mm | |
| Curved end module radius | 700 mm | |
| Backrest height above seat | 450 mm | |
| Backrest thickness (front to back) | 180 mm | |
| Integral side table top dimensions | 800 x 600 mm | |
| Table height above floor | 650 mm | |
| Seat cushion thickness | 120 mm | |
| Base plinth height (including glides) | 60 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Total unit weight (5-module configuration) | 145 kg | |
|---|---|---|
| Per seat static load rating | 150 kg | |
| Table top static load rating | 50 kg | |
| Number of seated users (shown configuration) | 4 adults | |
| Foam density (seat cushion) | 35 kg/m³ | |
| Foam density (backrest) | 28 kg/m³ | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Backrest tilt angle (fixed) | 10 degrees | |
| Table top uniformly distributed static load rating | 50 kg | |
| Seat foam density | 35 kg/m³ |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Seat and backrest upholstery | Woven polyester-blend fabric in teal, wrapped over foam padding | |
|---|---|---|
| Seat cushion core | High-resilience polyurethane foam, 120 mm thick, layered over a plywood deck | |
| Backrest cushion core | Medium-density polyurethane foam, 180 mm thick, with fabric wrap | |
| Internal frame | Engineered wood (particleboard / plywood) and solid wood support rails, dowelled and screwed | |
| Integral table top | White high-pressure laminate (HPL) surface with rounded edge profile, supported by an upholstered base module | |
| Base plinth | Upholstered box base matching seat fabric, enclosing the internal frame and supporting each module | |
| Floor contact glides | Black plastic non-marking glides fitted to the underside of each module | |
| Module connectors | Plastic or metal interlocking brackets between adjacent modules (hidden) | |
| Stitching and seams | Sewn fabric seams with matching thread, clean straight joins at module edges | |
| Module interconnectors | Metal interlocking brackets with plastic caps, hidden between adjacent module side panels | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Modular reconfiguration | Units can be arranged into straight rows, S-curves, full circles, or custom layouts using hidden inter-connectors | |
|---|---|---|
| Integrated side table module | One sector-shaped table unit replaces a seat module to provide a shared worksurface within the seating layout | |
| Central double-sided backrest | Two backrest cushions form a central divide, allowing back-to-back or face-in seating configurations | |
| Armless seat modules | All seat modules are armless to maximize seat count and allow uninterrupted movement along curved runs | |
| Low-profile base with glides | Low plinth base with plastic glides allows modules to sit flat on hard or carpeted floors and be repositioned with moderate effort | |
| Non-adjustable seat and back | Seat height, seat depth, and back angle are fixed; no recline, lift, or tilt mechanisms are present | |
| Contract-grade upholstery option | Upholstery can be specified in commercial-grade fabric, faux leather, or genuine leather with matching or contrasting table tops | |
| Optional power integration | Table modules or seat modules can typically be factory-fitted with USB-A, USB-C, or wireless charging pads upon request | |
| Armless seat module design | All seat modules are armless to maximize seat count and allow uninterrupted movement along curved runs | |
| Fixed static seat and back | Seat height, seat depth and back angle are permanently fixed; no recline, lift or tilt mechanisms are present | |
| Custom upholstery specification | Upholstery can be specified in commercial-grade fabric, faux leather, or genuine leather with matching or contrasting table top finishes | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Number of shipping packages (5-module set) | 5 cartons | |
|---|---|---|
| Standard carton size (single seat module) | 800 x 750 x 550 mm | |
| Table module carton size | 900 x 700 x 500 mm | |
| Gross weight per seat module | 32 kg | |
| Gross weight of table module | 22 kg | |
| Total shipment volume (5-module set) | 2.5 m³ | |
| Assembly time (5 modules) | 60 minutes | |
| 20 ft container loading quantity | 8 sets | |
| On-site assembly time (5 modules) | 60 minutes | |
| 20 ft GP container loading quantity | 8 sets |
推荐空间 / 目标用户 / 使用方式
| Office reception and waiting areas | Ideal for visitor seating in corporate lobbies and reception zones, providing multiple seats with a shared table | |
|---|---|---|
| Open-plan office breakout zones | Suitable for informal meetings, team huddles, and relaxation areas between workstations | |
| Airport and transit lounges | Appropriate for medium-traffic public waiting areas where durable, configurable seating is required | |
| Hotel and co-working lobbies | Works as modular island seating in lobbies, lounge bars, and coworking social spaces | |
| Education and library common areas | Suitable for student collaboration, reading, and casual study in university buildings and libraries | |
| Healthcare waiting rooms | Can be used in clinic and hospital waiting areas where wipeable, commercial-grade upholstery options are specified | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
欧洲市场准入与化学品要求
| EN 1022-2:2019 | Furniture – seating – determination of stability – part 2: seating for educational and office use | |
|---|---|---|
| EN 1728:2012 | Furniture – seating – determination of strength and durability | |
| EN 527-3:2011 | Office furniture – work tables and desks – part 3: safety requirements – applicable to the integral side table module used for laptop work |
美国及加拿大办公家具标准
| ANSI/BIFMA X5.4-2020 | Lounge and public seating furniture tests – applies to seat strength, back durability, and stability for commercial office lounges | |
|---|---|---|
| ANSI/BIFMA e3-2021 | Furniture sustainability standard – can be referenced for VOC emissions, material content, and recyclability targets |
适用于中国市场项目的标准
| GB/T 3324-2017 | Applicable standards and test results require confirmation | |
|---|---|---|
| GB/T 28477-2012 | Upholstered furniture – general technical requirements for sofas – applies to upholstered seat and back assemblies | |
| GB 20400-2006 | Safety limit of harmful substances for leather and fur furniture – applicable if leather or faux-leather upholstery is specified | |
| GB/T 10357.3-2013 | Furniture – assessment of the ability to withstand mechanical forces – part 3: tables – applicable to the integral side table module |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：Applicable standards and test results require confirmation； 2. GB/T 28477-2012：Upholstered furniture – general technical requirements for sofas – applies to upholstered seat and back assemblies； 3. GB 20400-2006：Safety limit of harmful substances for leather and fur furniture – applicable if leather or faux-leather upholstery is specified； 4. GB/T 10357.3-2013：Furniture – assessment of the ability to withstand mechanical forces – part 3: tables – applicable to the integral side table module； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具The KERTE ML-CURV-05-TEAL is a curved modular lounge seating unit categorized under modular soft seating and office lounge sofas, presented in a teal woven upholstery finish. Its visual form centers on a curved, low-profile silhouette defined by clean, strght sewn seams across cushions and module edges, with a sector-shaped white integral side table integrated into the layout and a central double-sided backrest that creates a natural spatial divide. The armless seat modules and rounded end modules contribute to a smooth, uninterrupted arc that feels open and inviting, while the fully upholstered base plinth creates a cohesive, streamlined look from floor to cushion top. Construction relies on an internal frame of engineered wood and solid wood support rls, joined with dowels and screws, and topped with a plywood deck for seat support. Seat cushions use high-resilience polyurethane foam wrapped in woven polyester-blend fabric, while backrest cushions feature medium-density polyurethane foam with the same fabric upholstery. The integral side table has a white high-pressure laminate surface with a rounded edge profile, mounted on an upholstered base module that matches the seating. Each module sits on a low upholstered plinth base fitted with black plastic non-marking glides, and adjacent modules connect via hidden interlocking brackets for stability. The fixed backrest has a slight rearward tilt for relaxed posture, with no adjustable seat or back mechanisms. Practical functions begin with full modular reconfigurability, allowing arrangements into strght rows, S-curves, full circles, or custom layouts to suit different space needs. The integrated side table provides a shared worksurface for drinks, laptops, documents, or magazines, eliminating the need for separate side tables. The central double-sided backrest supports both back-to-back and face-in seating configurations, enabling freestanding island placements without wall mounting. The armless design maximizes seat count and allows unobstructed movement along curved runs, while the glided base supports moderate repositioning effort on both hard and carpeted floors. Optional factory-integrated power solutions including USB-A, USB-C, and wireless charging pads are avlable as a procurement upgrade, and upholstery can be specified in commercial-grade fabric, faux leather, or genuine leather with matching or contrasting table top finishes. This seating is suited for a range of commercial and public spaces. It works well in office reception and wting areas, where its curved form creates a modern, welcoming first impression for visitors. In open-plan office breakout zones, it supports informal meetings, team huddles, and relaxation between workstations, with flexible group sizing enabled by the modular design. It is appropriate for rport and transit lounges, hotel and co-working lobbies, and education or library common areas, where its durable upholstery supports medium to high traffic use and its armless layout accommodates mixed seating postures and casual collaboration. For healthcare wting rooms, it can be specified with healthcare-grade vinyl or anti-microbial fabric to meet clinical environment requirements. Procurement teams should note that the shown 5-module configuration accommodates four adult users, and module counts can be expanded or reduced to match space requirements. Each module ships individually in corrugated cartons, with on-site assembly involving positioning and interlocking units. Freight planning can reference the total shipment volume and contner loading capacity for full orders. For specific project needs, confirm upholstery fiber composition, foam density grades, and connector compatibility with the supplier, and verify power integration and custom finish options at the time of order.
关注我们