纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	670 × 700 × 1180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg
Chair net weight	21 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound resilience	40%
Upholstery abrasion resistance	50,000 cycles
Seat static load verification	160 kg
Tilt mechanism durability	120,000 cycles
Gas-lift durability	100,000 cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Ivory leather-look upholstery over padded cushion; visible smooth facing, exact hide or leather grade requires BOM confirmation
Backrest upholstery	Ivory padded upholstered panel with horizontal lumbar seam; surface material visible, hide grade not provable
Outer side shell	Walnut-toned bent plywood shell curving around seat and back; wood veneer finish inferred from visible grain
Armrest supports	Bentwood supports continuous with side shell, capped with ivory upholstered contact pads
Internal seat board	12 mm molded plywood or hardwood-composite seat carrier, assumed under the visible cushion and shell
Back support board	10 mm curved plywood back carrier bonded to the upholstered panel and wood shell
Five-star base	Polished aluminum alloy five-star base with reflective finish, visible from leg and hub geometry
Gas lift	Black powder-coated steel gas-lift assembly with chromed telescopic section and central collar
Tilt mechanism	Black welded steel tilt plate beneath the seat, with visible adjustment lever at the right side
Casters	Five twin-wheel polyurethane casters with black wheel bodies and metallic mounting stems
Fasteners	Steel bolts and bracket connectors joining mechanism, shell, arm supports, and base; corrosion-resistant finish required
Seat cushion core	High-resilience polyurethane foam under upholstery, with density and fire rating to be validated by supplier datasheet

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree swivel around the central gas-lift axis, supported by the five-star base
Seat height adjustment	Pneumatic lift with 100 mm travel, operated by the visible right-side lever over a 520 mm seat-height range
Recline movement	Synchronized back tilt with 15-degree rearward angle from the upright seated position
Tilt lock	Multi-position tilt lock with upright and reclined positions, controlled by the under-seat mechanism lever
Tilt tension control	Knob-adjusted recline resistance for users up to 160 kg, located on the visible under-seat mechanism
Mobile movement	Five hard-floor casters provide rolling mobility and a 700 mm stable turning footprint
Integrated arm support	Fixed curved armrests provide forearm support at 230 mm above the seat without width or height adjustment
Lumbar contour	Horizontal padded back seam creates a defined lumbar zone; no powered or adjustable lumbar mechanism is visible
Single-lever operation	Right-side lever controls lift and mechanism functions, suitable for standard desk and executive-table use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a 2000 mm executive desk where the high back and walnut shell create a professional presence
Management meeting room	Use around conference tables for daily 4 hour meetings with rolling and swivel access
Private workstation	Appropriate for professional desk work at a 760 mm desk height and monitor-based tasks
Hotel business center	Fits refined business lounges requiring mobile seating with upholstered arm pads and quiet casters
Consulting or law office	Matches client-facing spaces needing ivory upholstery and walnut-toned wood rather than mesh-task styling
Reception or director area	Can be paired with matching visitor chairs where a coordinated wood-shell seating family is required
Commercial procurement	Recommended for projects requiring a 160 kg user-capacity target, five-star base, and replaceable casters
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 dimensions	Use for office chair dimensional safety and ergonomic coordinate verification
EN 1335-2 safety requirements	Specify structural safety, stability, caster, and mechanism acceptance for a task office chair
EN 1335-3 test methods	Use laboratory test methods for static load, fatigue, impact, and durability validation
EN 1021-1 cigarette ignition	Specify upholstery cigarette-ignition assessment when fire performance is required
EN 1021-2 match ignition	Specify upholstery match-flame assessment for higher fire-safety projects

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chairs	Use for back, seat, base, arm, tilt, and caster structural acceptance in commercial projects

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 general technical requirements	Use as the Chinese furniture acceptance basis for dimensions, workmanship, stability, and coating quality
GB/T 10357.3 strength and durability	Specify backward static load and fatigue testing for the chair back and frame
GB/T 10357.6 fatigue testing	Use for chair seat and back durability in commercial office seating procurement

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 general technical requirements：Use as the Chinese furniture acceptance basis for dimensions, workmanship, stability, and coating quality；
2. GB/T 10357.3 strength and durability：Specify backward static load and fatigue testing for the chair back and frame；
3. GB/T 10357.6 fatigue testing：Use for chair seat and back durability in commercial office seating procurement；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-WOOD-IVO-5STAR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-WOOD-IVO-5STAR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-WOOD-IVO-5STAR打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Executive Swivel Chair with Ivory Upholstery and Walnut Shell presents a refined executive-office silhouette through its tall upholstered back, curved walnut-toned bentwood shell, and polished five-star base. The ivory seat and back surfaces create a bright, tailored contrast with the warm wood surround, while the horizontal lumbar seam adds structure to the backrest. Bentwood arm supports continue the side-shell form and are finished with ivory upholstered contact pads. The fixed arms provide a clear 540 mm width between them and sit 230 mm above the seat, supporting a formal, enclosed seating posture. The polished aluminum alloy base gives the chair a bright metallic foundation, with twin-wheel polyurethane casters and a visible central gas-lift assembly. Construction combines a padded upholstered seat and back with curved bent plywood carriers and a walnut-toned bent plywood outer shell. The seat cushion is 90 mm thick and uses 45 kg/m3 foam, while the backrest has 70 mm padding and 35 kg/m3 foam. A 240 mm lumbar support zone is integrated into the back. The visible facing has a smooth, leather-like appearance, although exact hide or leather grade should be confirmed through the bill of materials. Under the seat is a black welded steel tilt plate, paired with a black powder-coated steel gas lift featuring a chromed telescopic section. The chair supports full 360-degree swivel movement and pneumatic seat-height adjustment with 100 mm of travel across a 520 mm seat-height range, operated by the right-side lever. It also offers synchronized recline through a 15-degree rearward angle, multi-position tilt lock, and knob-adjusted recline resistance suited to users up to 160 kg. The five casters provide rolling mobility on hard floors and a 700 mm stable turning footprint. This model is appropriate behind a substantial executive desk, in management meeting rooms, at private workstations, or in hotel business centers. Its ivory-and-walnut appearance also suits consulting and law offices, reception spaces, and director areas where a coordinated wood-shell seating family is preferred. Buyers should note the unbranded specification, fixed arm geometry, 50,000-cycle upholstery abrasion rating, and recommended 160 kg weight capacity. Each set ships in two cartons, with a packaged gross weight of 23 kg and a stated assembly time of 40 minutes. Material confirmation, floor compatibility, replacement caster options, and volume-loading needs should be reviewed before project purchasing.

High-Back Executive Swivel Chair with Ivory Upholstery and Walnut Shell Specifications

供应商与现货