纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 690 × 1220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	150 kg
Net weight	18 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Seat static load verification	150 kg held for 1 hour
Caster rolling durability	100,000 cycles
Gas-lift cycle life	100,000 height-adjustment cycles
Suggested user height range	165 to 190 cm
Warranty duration	36 months

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Black full-grain leather-look upholstery over padded seat and back
Upholstery thickness	1.2 mm face material
Seat cushion	Molded polyurethane foam, 80 mm thick at center
Back cushion	Flexible polyurethane foam, 60 mm thick at lumbar zone
Internal seat shell	12 mm molded plywood or 2.0 mm reinforced steel seat deck
Back internal frame	1.5 mm steel tubular frame with molded back board
Armrest construction	25 x 25 mm black-painted steel cantilever loop with padded contact rail
Five-star base	2.0 mm black-painted steel five-star radial base
Gas lift	50 mm chrome-plated Class 4 steel gas cylinder
Casters	Black nylon twin-wheel casters with steel mounting stems
Mechanism cover	Black steel and molded-polymer tilt mechanism housing
Stitching and seams	Horizontal upholstered seam with 8 stitches per 100 mm target pitch

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360-degree rotation around the central gas-lift bearing
Seat height adjustment	Pneumatic lift through 80 mm vertical travel via right-side lever
Recline function	Centered synchro-tilt with 15-degree maximum back recline
Tilt lock	Multi-position lock at upright, 8-degree, and 15-degree recline positions
Tilt tension control	Rear rotary knob adjusts resistance through 5 full turns
Mobility	Five 50 mm twin-wheel casters provide rolling movement on carpet or hard floors
Arm support	Fixed black cantilever arms provide 230 mm forearm support without height or pivot adjustment
Lumbar support	Integrated padded lumbar zone formed by horizontal back seam and contoured cushioning
Head and neck support	Integrated 180 mm high padded head zone attached directly to tall back
Assembly method	Tooled bolt-up installation of back, arms, mechanism, gas lift, base, and casters
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Carton dimensions	820 x 680 x 360 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a 1600 to 2000 mm executive desk where the tall headrest supports long meetings and computer work
Private workstation	Appropriate for daily 6 to 8 hour desk use by users up to 150 kg and 190 cm tall
Meeting or boardroom setting	Use as a premium visitor or conference chair around 720 to 750 mm high board tables
Home office	Suitable for a dedicated home workstation with hard floor or low-pile carpet and 700 mm desk clearance
Reception manager station	Fits reception or supervisor positions requiring upright presentation and easy turning toward visitors
Procurement configuration	Recommended with hard-floor soft casters for stone or wood floors and brake casters for sloped sites
Recommended table clearance	Pair with desks having 680 to 720 mm knee height and 600 mm minimum knee depth
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use for office chair dimensions and safety geometry during purchasing inspection
EN 1335-2 applicability	Use for structural safety requirements including stability and strength
EN 1335-3 applicability	Use for structural test methods and fatigue verification of seat, back, arms, and base
EN 1021-1 applicability	Use for cigarette-ignition upholstery resistance when fire testing is specified

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 Office Chair Test applicability	Use for commercial office-chair strength, stability, durability, and back test acceptance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 applicability	Applicable standards and test results require confirmation
GB/T 3324 applicability	Use for general wooden furniture technical requirements if the internal shell uses plywood
GB 18580 applicability	Use for formaldehyde emission limits on any wood-based seat or back board
GB/T 2960 applicability	Leather physical and chemical test methods may apply if genuine leather is supplied

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 applicability：Applicable standards and test results require confirmation；
2. GB/T 3324 applicability：Use for general wooden furniture technical requirements if the internal shell uses plywood；
3. GB 18580 applicability：Use for formaldehyde emission limits on any wood-based seat or back board；
4. GB/T 2960 applicability：Leather physical and chemical test methods may apply if genuine leather is supplied；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXE-HB-BLK-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXE-HB-BLK-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXE-HB-BLK-01打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Black Leather Executive Swivel Chair, model EXE-HB-BLK-01, presents a formal executive seating profile with a tall upholstered back, padded seat, fixed cantilever arms, and a black five-star base. Its coordinated black finish and upright silhouette make it suited to settings where a professional, managerial appearance is required. The clear width between the armrests is 540 mm, while the high back includes a defined lumbar support zone and substantial padding for long meetings, computer work, and daily desk use. The seat and back use black full-grain leather-look upholstery over foam cushioning. The face material is 1.2 mm thick. Seat support uses molded polyurethane foam, with an 80 mm cushion at the center and a finished cushion thickness of 90 mm. The back uses flexible polyurethane foam, with 60 mm of foam at the lumbar zone and 70 mm of finished backrest padding. Internal construction consists of a molded plywood or reinforced steel seat deck paired with a steel tubular back frame and molded back board. The armrests use a black-painted steel cantilever loop with a padded contact rail, while the base is a black-painted steel five-star radial design. A chrome-plated Class 4 steel gas cylinder and nylon twin-wheel casters complete the structure. Functionally, the chair offers full 360-degree swivel movement and pneumatic seat-height adjustment controlled by a right-side lever, with 80 mm of vertical travel. The centered synchro-tilt mechanism allows a maximum 15-degree back recline, with lock positions at upright, 8 degrees, and 15 degrees. A rear rotary knob adjusts tilt resistance across five turns. The fixed arms provide 230 mm of forearm support but do not adjust in height or pivot. Five casters support rolling movement across carpet or hard floors. This model is appropriate for executive offices, private workstations, boardrooms, home offices, and reception or supervisor stations. It works behind executive desks, around board tables, and in dedicated home workstations with suitable desk clearance. It is intended for users up to 150 kg and 190 cm tall. The published weight capacity is backed by a static seat load verification of 150 kg held for one hour, and caster rolling durability is rated for 100,000 cycles. Procurement teams should note that the chair is unbranded and supplied as one set across two cartons, with a packaged gross weight of 23 kg and a reference assembly time of 40 minutes. For stone or wood floors, hard-floor soft casters are recommended; for sloped sites, brake casters are advised. Overall dimensions are 680 by 690 by 1220 mm, allowing planners to check clearance, arm spacing, and desk compatibility before purchase.

High-Back Black Leather Executive Swivel Chair Specifications

供应商与现货