纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 660 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	135 kg
Static base verification load	680 kg
Gas-lift service cycles	120,000 height cycles
Seat impact endurance	100,000 cycles
Caster rolling durability	100,000 cycles over hard-floor test surface
Backrest cyclic load	120,000 cycles
Tilt mechanism static load	200 kg
Suitable user count	1 person
Net weight	17.5 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer structural shell	8 mm molded bent plywood with tan lacquered outer face
Seat cushion	45 kg/m3 high-resilience polyurethane foam, 90 mm thick
Back cushion	35 kg/m3 molded polyurethane foam, 60 mm thick
Arm cushions	Integrated polyurethane foam pads wrapped in white upholstery, 60 mm thick
Upholstery surface	White polyurethane leather, 1.0 mm face thickness
Upholstery abrasion target	50,000 Martindale double rubs
Seat support board	12 mm bent plywood or molded composite seat carrier
Five-star base	Polished die-cast aluminum, 3.0 mm average wall section
Gas-lift tube	Chrome-plated steel telescopic cylinder, 50 mm outer diameter
Tilt mechanism	2.5 mm powder-coated steel plate under the seat
Caster wheels	Black nylon twin wheels with 60 mm diameter and steel axle
Joining hardware	Steel bolt and bushing kit connecting shell, mechanism, gas lift, and base

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Height adjustment	Pneumatic lever raises the seat through a 100 mm stroke between 440 and 540 mm
360-degree swivel	Central gas-lift bearing enables full 360-degree rotation without repositioning the base
Tilt movement	Single-point synchro mechanism provides 12-degree rearward recline from upright position
Tilt tension control	Rotating tension knob adjusts resistance for users up to 135 kg
Upright lock position	Mechanism locks at the upright 0-degree task position
Mobility	Five twin-wheel casters provide multi-directional rolling on hard floors and low-pile carpet
Integrated arm support	Curved side shell and padding provide fixed 220 mm arm support without independent adjustment
Bomber-style side access detail	Chrome circular detail on left outer shell provides a decorative through-hole or cover feature
Assembly method	Base, casters, gas lift, and seat body assemble without welded field joints
Recline limitation	12-degree maximum tilt prevents over-rotation of the low curved back
Swivel radius	330 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable behind a management desk where the curved tan shell creates a refined guest-facing profile
Private workspace	Provides one-person height-adjustable task seating for desk and computer work
Meeting or conference room	Usable in compact conference settings requiring mobility and a polished modern appearance
Home office	Fits contemporary residential workspaces pairing wood tones with white upholstery
Consultation area	Suitable for advisor, sales, or guest seating across a low table or desk
Hard-floor interiors	Best paired with wood, tile, vinyl, or low-pile carpet using standard nylon casters
Design-focused reception	Can be used behind reception counters or in styled showrooms
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020 office furniture dimensions	Applies to seat-height, dimensional, and ergonomic-fit verification
EN 1335-2:2018 safety requirements	Applies to structural safety and stability of office work chairs
EN 1335-3:2020 test methods	Applies to strength, durability, and rolling-base laboratory verification
EN 1022:2018 seating stability	Applies to forward, rearward, and lateral stability testing

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017 office chairs	Applies to commercial seating safety, durability, static, impact, and cyclic tests
BIFMA X5.1 caster and base test clauses	Applies to five-star base fatigue, caster durability, and floor-load checks

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 general technical furniture requirements	Applies to dimensional workmanship, stability, and finished-furniture quality inspection
GB/T 10357 furniture mechanical test methods	Applies to strength, durability, impact, and stability test procedures
GB 18580-2017 formaldehyde emission control	Applies to formaldehyde emission from wood-based panels used in the bent shell

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 general technical furniture requirements：Applies to dimensional workmanship, stability, and finished-furniture quality inspection；
2. GB/T 10357 furniture mechanical test methods：Applies to strength, durability, impact, and stability test procedures；
3. GB 18580-2017 formaldehyde emission control：Applies to formaldehyde emission from wood-based panels used in the bent shell；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · BW-EXEC-5W-WT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · BW-EXEC-5W-WT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · BW-EXEC-5W-WT打开导出工具

页面快速操作

发布采购询价

产品描述

The Contemporary Bentwood Swivel Executive Chair, model BW-EXEC-5W-WT, combines a sculptural bent plywood shell with crisp white upholstery for a modern executive seating profile. Its curved tan-lacquered outer shell wraps around padded seat, back, and integrated arm cushions, presenting a refined wood-toned form from the rear while keeping the seating surface light and contemporary. A polished die-cast aluminum five-star base gives the chair a structured commercial footprint, with chrome-plated steel in the telescopic gas lift and steel components in the tilt mechanism. The chair measures 650 mm wide, 660 mm deep, and 1010 mm high, with 540 mm between the fixed arm supports. Seating comfort is built around layered foam and a supportive bent plywood or molded composite carrier. The seat uses 45 kg/m3 high-resilience polyurethane foam at 90 mm thick, while the back cushion uses 35 kg/m3 molded polyurethane foam and includes a 240 mm lumbar support zone. Arm cushions are integrated foam pads wrapped in the same 1.0 mm white polyurethane leather. Functional features support active desk use: a pneumatic lever adjusts seat height through a 100 mm stroke, from 440 to 540 mm, and the central bearing allows 360-degree swivel. The single-point synchro mechanism offers 12-degree rearward recline, adjustable tilt tension, and a locked upright task position. Five twin-wheel nylon casters provide multi-directional movement on hard floors and low-pile carpet, and the fixed curved side shell provides 220 mm of arm support without separate adjustment. The chair is suited to management offices, private workspaces, compact conference rooms, consultation settings, and contemporary home offices. Its guest-facing curved back makes it appropriate behind a desk as well as around meeting or low-table layouts. Procurement teams should note the unbranded supply format, 135 kg recommended user weight, two-carton packaging, 23 kg packaged weight, and 40-minute reference assembly time. The listed durability values include 120,000 gas-lift height cycles, 100,000 seat impact cycles, 100,000 caster rolling cycles on a hard-floor test surface, and a 50,000 Martindale double-rub upholstery target, useful points for project comparison and specification planning.

Contemporary Bentwood Swivel Executive Chair Specifications

供应商与现货