纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	630 × 650 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Chair net weight	18 kg
Recommended user weight capacity	150 kg
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Static five-star base load reference	500 kg
Tilt mechanism cyclic durability target	100,000 cycles
Caster rolling durability target	100,000 cycles
Suggested single-user daily use	8 hours
Color count	1 visible upholstery color

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Gray smooth upholstery with tailored panel seams; leather or polyurethane alternatives require BOM confirmation
Back upholstery	Gray upholstered contoured back with vertical recessed stitching and lumbar shaping
Seat cushion core	80 mm molded polyurethane foam with density target 45 kg/m3
Back cushion core	35 kg/m3 polyurethane padding over a rigid load-bearing inner shell
Inner seat support board	12 mm molded plywood or composite board bonded to the seat cushion
Back inner frame	20 x 2 mm tubular steel or equivalent reinforced polymer frame
Arm pads	Black padded top pads with soft-touch surface and polished loop supports
Arm supports	Polished aluminum-alloy or chrome-plated steel loop brackets with 25 x 2 mm section reference
Central mechanism	Black steel multi-position tilt mechanism with 3 mm plate thickness reference
Gas lift	50 mm black class 4 gas-lift cylinder with 100 mm height-adjustment stroke
Five-star base	Polished aluminum-alloy five-star base with 2.5 mm wall thickness reference
Casters	Five black twin-wheel nylon casters with 60 mm wheels and hard-floor treads

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Seat rotates 360 degrees around the central gas-lift bearing for workstation access
Gas-lift height adjustment	Pneumatic lever adjusts seat height over a 100 mm stroke from 360 to 460 mm
Synchronous tilt action	Central mechanism allows seat and back recline with a maximum 15-degree backward tilt
Tilt lock	One lever locks the recline mechanism in the upright position and selected intermediate positions
Tilt tension control	Front knob controls recline resistance for users within the 150 kg weight capacity
Fixed arm support	Loop armrests provide a 230 mm support height above the seat without height or pivot adjustment
Mobile five-point support	Five casters spread load across a 700 mm diameter footprint and enable omnidirectional movement
Lumbar contour support	Contoured back panel provides built-in lumbar shaping without an adjustable lumbar pump
Upholstered rotation clearance	630 mm overall width and raised arm design allow swivel clearance beside standard 720 mm desks
Floor protection	Twin-wheel 60 mm nylon casters distribute load and are intended for hard floors or low-pile carpets
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private office	Suitable for executive desks and managerial workstations requiring a formal gray upholstered chair
Open-plan workstation	Suitable for individual task seating where swivel, tilt, and mobile casters support desk movement
Meeting room	Appropriate as a visitor or conference chair around 760 mm high meeting tables
Home office	Suited to daily desk work in residential offices where padded back and arm support are priorities
Reception or consulting room	Fits professional consultation settings with gray upholstery and polished metallic trim
Hard-floor and low-pile environments	Use on wood, tile, vinyl, or low-pile carpet subject to caster floor-rating confirmation
Single-user seating	Configured for one adult user with 150 kg recommended capacity and 8-hour daily-use target
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 applicability	Use EN 1335for office chair dimensional verification, including seat height, depth, backrest, and clearance
EN 1335-2 applicability	Use EN 1335for safety, stability, structural strength, and caster performance acceptance
EN 1335-3 applicability	Use EN 1335for test methods supporting safety and structural verification of the chair
EN 1022 applicability	Use EN 1022 as an additional seating stability reference where specified by the purchaser

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 applicability	Use ANSI/BIFMA X5.1 for back, seat, base, arm, caster, and durability verification of office chairs

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFC-MB-GRY-PA-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFC-MB-GRY-PA-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFC-MB-GRY-PA-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Mid-Back Gray Upholstered Executive Swivel Office Chair combines a structured executive silhouette with mobile task-chair functionality. Its gray smooth upholstery is tailored with panel seams on the seat and vertical recessed stitching on the contoured back, where lumbar shaping defines a supportive mid-height profile. Black padded arm pads contrast with polished loop supports, while the five-star base and caster layout reinforce a formal office appearance. Overall dimensions are 630 by 650 by 1010 millimeters, with 540 millimeters of clear width between armrests. The cushion system uses a 90-millimeter finished seat cushion and 70-millimeter backrest padding. Seat support centers on an 80-millimeter molded polyurethane foam core with a 45 kg/m3 density target, bonded to a 12-millimeter molded plywood or composite support board. The back uses 35 kg/m3 polyurethane padding over a rigid load-bearing inner shell, supported by a 20 by 2 millimeter tubular steel or equivalent reinforced polymer frame. Arm supports are polished aluminum-alloy or chrome-plated steel loop brackets, paired with soft-touch black pads. A black steel multi-position tilt mechanism with a 3-millimeter plate reference, gas lift, and black nylon casters complete the construction. The chair weighs 18 kilograms and supports a recommended user weight of 150 kilograms; the five-star base has a 500-kilogram static load reference, and the tilt mechanism carries a 100,000-cycle durability target. Foam rebound is rated at 40 percent. Users benefit from 360-degree swivel access and pneumatic height adjustment across a 100-millimeter stroke, setting seat height from 360 to 460 millimeters. The synchronous mechanism permits a maximum 15-degree backward tilt, with a lever to lock the chair upright or in selected intermediate positions. A front knob adjusts recline resistance. Fixed armrests provide support 230 millimeters above the seat, and five casters create a 700-millimeter-diameter footprint for omnidirectional movement. This model suits executive desks, managerial workstations, open-plan task stations, conference settings around 760-millimeter-high meeting tables, home offices, reception areas, and consulting rooms. It is intended for wood, tile, vinyl, or low-pile carpet, subject to confirmation that the selected casters are rated for the floor surface. Procurement teams should note the unbranded model OFC-MB-GRY-PA-01, leather or polyurethane upholstery alternatives requiring bill-of-materials confirmation, and shipment as one set in two cartons. Reference packaging measures 850 by 420 by 720 millimeters, with 23 kilograms packaged gross weight, 0.26 cubic meters per set, 40 minutes assembly time, and an indicative 20GP load of 135 sets at 85 percent space utilization.

Mid-Back Gray Upholstered Executive Swivel Office Chair Specifications

供应商与现货