纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	700 × 720 × 1220 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Chair net weight	22 kg
Recommended user weight capacity	150 kg
Recommended user height range	165 to 190 cm, published value 190 cm
Seating capacity	1 person
Gas-lift vertical stroke	80 mm
Recline travel	15 degrees
Caster rolling durability target	100000 cycles
Seat static-load acceptance target	150 kg
Base static-load acceptance target	1136 kg
Upholstery abrasion acceptance target	50000 Martindale cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Ivory leather or leather-match facing with matching side panels
Backrest construction	Padded tall back shell with a horizontal head-zone seam and curved lumbar seam
Seat cushion support	12 mm molded plywood or composite seat board under high-resilience foam
Seat foam	100 mm high-resilience polyurethane foam, density 45 kg/m3
Back foam	80 mm polyurethane padding, density 35 kg/m3
Headrest zone padding	Integral 90 mm padded upper-back section without separate adjustable headrest
Arm pads	Upholstered fixed arm pads over steel or reinforced polymer supports
Under-seat mechanism	Black powder-coated steel tilt and height-control plate
Gas lift	50 mm diameter steel gas cylinder with black telescopic sleeve
Five-star base	Polished aluminum-alloy or chrome-plated steel five-star base
Casters	Black nylon twin-wheel casters with steel mounting stems
Seat underside trim	Black impact-resistant polymer or steel support skirt

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Full 360 degree rotational seat around the central gas-lift axis
Pneumatic height adjustment	80 mm lift stroke controlled by a seat-side lever for a 530 mm maximum seat height
Backrest tilt	15 degree synchronized rocking angle with adjustable tension for body-weight balance
Tilt lock	One upright lock position and one free-tilt position selected by the under-seat lever
Integrated arm support	Fixed 220 mm arm support height with upholstered contact surface for forearm resting
Mobile five-base support	Five 60 mm twin-wheel casters provide omnidirectional movement on level office floors
High-back trunk support	780 mm backrest provides shoulder, upper-back, and lumbar contact zones
Seat-depth ergonomic support	500 mm seat depth supports thigh contact while retaining knee clearance
Recline tension tuning	Under-seat tension knob adjusts resistance through 5 relative settings from light to firm
Hard-floor mobility	Twin nylon wheels distribute load and reduce point pressure on wood or tile floors
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Use behind a 1600 to 2200 mm executive desk where the high back and ivory finish create a formal management setting
Private manager workspace	Suitable for daily 6 to 8 hour computer, discussion, and review tasks with swivel, recline, and height adjustment
Conference or boardroom setting	Pair with dark wood, glass, or lacquer meeting tables for a neutral premium seating appearance
Consultation room	Use for client meetings where padded arms and a high back provide a comfortable seated posture
Hotel business center	Suitable for upscale business suites and reserved workstations requiring mobility and refined upholstery
Home executive office	Recommended for users furnishing a dedicated study with a large desk and hard-floor surface
Procurement configuration note	Specify carpet or hard-floor caster treads before order because the visible wheel material alone does not confirm floor compatibility
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020 applicability	Use for office-chair dimensions, terminology, and structural classification during technical comparison
EN 1335-2:2018 applicability	Use for safety, strength, and durability acceptance testing of the task chair structure
EN 1335-3:2020 applicability	Use for specified test methods and fixtures when validating strength and durability
EN 1021-1:2006 applicability	Use for cigarette ignition resistance testing of upholstered seating materials
EN 1021-2:2014 applicability	Use for match-flame ignition resistance testing of upholstered seating materials

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017 applicability	Use for general-purpose office-chair safety, strength, and durability acceptance criteria

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 applicability	Applicable standards and test results require confirmation
GB/T 10357.3-2013 applicability	Use for seat and back strength and fatigue test methods during procurement inspection
GB/T 27925-2011 applicability	Use as the leather material identification and performance reference when genuine leather is specified
GB 18584-2001 applicability	Use for indoor decorative materials and limited formaldehyde release on wood-based components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 applicability：Applicable standards and test results require confirmation；
2. GB/T 10357.3-2013 applicability：Use for seat and back strength and fatigue test methods during procurement inspection；
3. GB/T 27925-2011 applicability：Use as the leather material identification and performance reference when genuine leather is specified；
4. GB 18584-2001 applicability：Use for indoor decorative materials and limited formaldehyde release on wood-based components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-HB-IVO-5STAR

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-HB-IVO-5STAR

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-HB-IVO-5STAR打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Ivory Leather Executive Swivel Chair, model EXEC-HB-IVO-5STAR, presents a formal executive seating profile with a tall padded back, integrated upholstered arms, and a polished five-star metal base. Its ivory leather or leather-match facing is coordinated with matching side panels, while the back shell uses a horizontal head-zone seam and a curved lumbar seam to define the shoulder, upper-back, and lumbar contact areas. There is no separate adjustable headrest; instead, the upper-back section provides integral 90 mm padding. Fixed arm pads offer a soft upholstered forearm surface, and black twin-wheel casters contrast with the bright base to support a refined management-room appearance. Construction combines cushioned support with a structured under-seat frame. The seat uses high-resilience polyurethane foam over a 12 mm molded plywood or composite seat board. Seat foam is 100 mm thick at 45 kg/m3 density, while the finished cushion thickness is 90 mm. Back padding is 80 mm thick at 35 kg/m3 density, with a finished backrest padding thickness of 70 mm and a 240 mm lumbar support zone. The 780 mm backrest provides full upper-body contact, and the clear width between armrests is 540 mm. A black powder-coated steel tilt and height-control plate, 50 mm diameter steel gas cylinder with black telescopic sleeve, and steel or reinforced polymer arm supports complete the primary structure. Net weight is 22 kg, and recommended user weight capacity is 150 kg. Functionality is intended for flexible desk-based work. The seat rotates through a full 360 degrees around the central gas-lift axis, and the seat-side lever controls an 80 mm pneumatic height stroke with a maximum seat height of 530 mm. The synchronized backrest tilt offers 15 degrees of travel with adjustable tension for body-weight balance, and the under-seat lever selects one upright lock position or one free-tilt position. Fixed arm support height is 220 mm. Five 60 mm twin-wheel casters provide omnidirectional movement on level office floors, with a published caster rolling durability target of 100000 cycles. The chair is designed for one person and a maximum recommended user height of 190 cm. It suits executive offices behind a 2200 mm executive desk, private manager workspaces for daily computer and discussion tasks, boardrooms with dark wood, glass, or lacquer tables, consultation rooms, hotel business centers, and dedicated home studies with large desks and hard-floor surfaces. Buyers should note the unbranded supply format, leather or leather-match upholstery option, two-carton packaging, 40-minute reference assembly time, 23 kg packaged gross weight, and 0.26 m3 carton volume. A 20GP container can load 135 sets at 85 percent space utilization.

High-Back Ivory Leather Executive Swivel Chair Specifications

供应商与现货