The Mesh Back Cantilever Sled Base Office Visitor Conference Chair (model MS-CANT-001, unbranded) delivers streamlined, professional fixed seating for a range of formal and semi-formal work and study settings. Presenting a clean, uniform silhouette tailored to cohesive space layouts, the chair measures 640 x 560 x 1015 mm overall, with a 500 mm wide, 440 mm deep seat positioned 450 mm above floor level, a 580 mm tall contoured mesh backrest, and fixed armrests set 190 mm above the seat surface for relaxed arm placement during extended meetings or visits. Built for consistent long-term use, the chair pairs a black breathable polyester mesh backrest with a 50 mm thick seat cushion filled with 45 kg/m³ high-density polyurethane foam, upholstered in tear-resistant black fabric and supported by a 14 mm thick bent plywood internal seat pan. Fixed injection-molded black polypropylene armrests attach to a 1.5 mm thick powder-coated cold-rolled steel tube continuous sled frame, fitted with non-slip TPE rubber foot pads. All seams are stitched with high-strength polyester thread at an 8 mm seam pitch, with the mesh fabric rated for 50000 abrasion cycles, the frame holding a 1000 kg static load rating, and the chair supporting a 90 kg recommended static weight capacity with 8 kg net product weight. Functional design prioritizes comfort and practicality: the open mesh backrest enables constant air circulation to reduce heat buildup, with integrated dual-zone lumbar support built into the contoured back shape. The non-swivel, non-reclining, non-height-adjustable fixed structure delivers stable, consistent positioning, while the continuous sled frame distributes weight evenly across floor contact points, and rubber foot pads prevent floor scratches and unwanted sliding. The stackable-compatible sled base supports flexible arrangement and compact storage. This chair is well suited for formal office conference rooms, professional reception and visitor areas, training room environments, open office guest seating aligned with standard 750 mm height office desks, and home office study spaces, pairing seamlessly with 2.4 m executive desks for coordinated setups. For procurement planning, note that each set ships across 2 cartons with a 23 kg packaged gross weight and 0.26 m³ total volume, requiring 40 minutes of assembly per unit; 135 sets fit in a 20GP container at 85% space utilization.