Single Panel Workstation Desk with Fixed Screens and Mobile Pedestal (model WS-SGL-1200-600-MP) is listed under L-Shaped Office Desk. Dimensions: 1200 × 600 × 1100 mm. Materials: 25 mm E1-class wood-based particleboard with light oak melamine facing and matching PVC edge banding. Load capacity: 80 kg. Product Features: single,workstation,three-sided,screen,mobile,pedestal,light,oak,finish,charcoal,frame,ribbed,privacy,panel,cable,port. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | GENUOWA | Model | WS-SGL-1200-600-MP |
| Knee opening width | 550 mm | Finished Top Thickness | 50 mm |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | Leg / Support Section | 80 mm main section with 2 mm metal wall |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm | Product net weight | 68 kg |
| Distributed desktop load | 80 kg | Pedestal drawer load | 20 kg |
| Single drawer dynamic load | 15 kg | Caster load capacity per set | 60 kg |
| Recommended occupant capacity | 1 person | Suggested chair seat width | 520 mm |
| Suggested maximum monitor size | 27 in | Panel surface abrasion acceptance | 300 cycles |
| Warranty target | 5 years | Desktop and panels | 25 mm E1-class wood-based particleboard with light oak melamine facing and matching PVC edge banding |
| Screen frame | Charcoal powder-coated aluminum or steel rectangular profile with corner connector post | Upper privacy infill | Translucent ribbed acrylic or polycarbonate sheet in a light neutral finish |
| Lower partitions | Light oak melamine panel enclosed by the same charcoal metal frame | Mobile pedestal | Light oak melamine drawer body with black base trim, metal lock and silver pull hardware |
| Under-desk rail and leveling parts | Black powder-coated steel modesty rail, support rail and nylon-faced glides or casters | Privacy division | Three-sided fixed screens provide rear and side separation while leaving the front open for one task chair |
| Cable management | A 60 mm rear desktop grommet routes monitor and power cables toward the under-desk rear zone | Mobile file storage | Two-compartment pedestal with one shallow lockable drawer and one lower storage compartment rolls under the left desktop |
| Floor adaptation | Framed panel supports and pedestal casters allow repositioning; desk frame should use adjustable glides for uneven floors | Knock-down carton count | 3 cartons |
| Total gross weight | 82 kg | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons | Open-plan individual workstation | Suits call centers, administration rows and staff zones where one user needs visual screening without full room enclosure |
| Dense office benching layout | Can be arranged in linear or back-to-back runs with separate task chairs and shared aisle access | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Knee opening width | 550 mm | |
|---|---|---|
| Finished Top Thickness | 50 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 68 kg | |
|---|---|---|
| Distributed desktop load | 80 kg | |
| Pedestal drawer load | 20 kg | |
| Single drawer dynamic load | 15 kg | |
| Caster load capacity per set | 60 kg | |
| Recommended occupant capacity | 1 person | |
| Suggested chair seat width | 520 mm | |
| Suggested maximum monitor size | 27 in | |
| Panel surface abrasion acceptance | 300 cycles | |
| Warranty target | 5 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Desktop and panels | 25 mm E1-class wood-based particleboard with light oak melamine facing and matching PVC edge banding | |
|---|---|---|
| Screen frame | Charcoal powder-coated aluminum or steel rectangular profile with corner connector post | |
| Upper privacy infill | Translucent ribbed acrylic or polycarbonate sheet in a light neutral finish | |
| Lower partitions | Light oak melamine panel enclosed by the same charcoal metal frame | |
| Mobile pedestal | Light oak melamine drawer body with black base trim, metal lock and silver pull hardware | |
| Under-desk rail and leveling parts | Black powder-coated steel modesty rail, support rail and nylon-faced glides or casters |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Privacy division | Three-sided fixed screens provide rear and side separation while leaving the front open for one task chair | |
|---|---|---|
| Cable management | A 60 mm rear desktop grommet routes monitor and power cables toward the under-desk rear zone | |
| Mobile file storage | Two-compartment pedestal with one shallow lockable drawer and one lower storage compartment rolls under the left desktop | |
| Floor adaptation | Framed panel supports and pedestal casters allow repositioning; desk frame should use adjustable glides for uneven floors |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Knock-down carton count | 3 cartons | |
|---|---|---|
| Total gross weight | 82 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | Main top 2500× 1050× 350 mm; return/pedestal packed separately | |
| Reference Packaged Gross Weight | 180 kg/set in 4 cartons |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan individual workstation | Suits call centers, administration rows and staff zones where one user needs visual screening without full room enclosure | |
|---|---|---|
| Dense office benching layout | Can be arranged in linear or back-to-back runs with separate task chairs and shared aisle access |
EU Market Access Requirements* EN Standards
| EN 527-1 office desks | Use for safety, strength and dimensional requirements for a seated office work surface. | |
|---|---|---|
| EN 527-2 office desk mechanical tests | Use for strength, durability and stability verification of the desktop and support structure. | |
| EN 717-1 panel emission | Use formaldehyde emission testing for wood-based panels when European project documentation is required. |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5 desk products | Use as optional North American acceptance reference for desk strength, durability and stability. | |
|---|---|---|
| ANSI/BIFMA X5.9 storage units | Apply to the mobile pedestal locks, drawers, slides and mobility tests if BIFMA specification is required. | |
| ANSI/BIFMA e3 sustainability | Use only if the supplier can provide declared material, emissions and social-environmental credits. |
Standards applicable to China-market projects
| GB/T 3324 dimensional and structural acceptance | Apply to wooden office desks for dimensional tolerances, edge quality, stability and assembly inspection. | |
|---|---|---|
| GB/T 3325 metal furniture acceptance | Apply to the metal screen frame, rails and hardware for coating integrity and structural requirements. | |
| GB 18580 formaldehyde emission | Use as procurement acceptance for wood-based panels if the supplier declares Chinese-market compliance. | |
| GB/T 10357 furniture mechanical tests | Use desk strength, durability and stability test methods for third-party verification before acceptance. |
This product must meet the following technical requirements: 1. GB/T 3324 dimensional and structural acceptance: Apply to wooden office desks for dimensional tolerances, edge quality, stability and assembly inspection.; 2. GB/T 3325 metal furniture acceptance: Apply to the metal screen frame, rails and hardware for coating integrity and structural requirements.; 3. GB 18580 formaldehyde emission: Use as procurement acceptance for wood-based panels if the supplier declares Chinese-market compliance.; 4. GB/T 10357 furniture mechanical tests: Use desk strength, durability and stability test methods for third-party verification before acceptance.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp