2-Seater Weatherproof Square Outdoor Patio Bistro Table with Cross Pedestal Base (model OBT-SQ70-WH-CROSS) is listed under PE Rattan Patio Dining Set. Dimensions: 700 × 700 × 760 mm. Materials: Matte white weather-resistant HDPE resin with integrated parallel drainage grooves. Load capacity: 100 kg. Product Features: Outdoor,weather,resistant,Pedestal,base,Square,slatted,top,2-seater,bistro,size. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JINQIU | Model | OBT-SQ70-WH-CROSS |
| Overall dimensions (W × D × H) | 700 × 700 × 760 mm | Tabletop thickness | 25 mm |
| Central support column diameter | 76 mm | Cross base total spread | 680 mm |
| Base foot width | 80 mm | Undertable knee clearance height | 720 mm |
| Tabletop edge overhang from column | 312 mm | Base foot height from ground | 30 mm |
| Tabletop drainage groove width | 8 mm | Primary Component Thickness | 40 mm according to load-bearing role |
| Hardware / Moving-part Clearance | 5 mm operating clearance | Net product weight | 15 kg |
| Static tabletop uniform load capacity | 100 kg | Recommended seating capacity | 2 people |
| Outdoor weather durability rating | 5 years | Surface stain resistance | Grade 5 |
| Base slip resistance static coefficient | 0.6 | Reference Static Load | 150 kg depending on category |
| Moving-part Durability Reference | Acceptance target 50000 cycles | Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
| Tabletop | Matte white weather-resistant HDPE resin with integrated parallel drainage grooves | Central support column | Powder-coated white aluminum alloy tube |
| 4-prong cross base | Die-cast aluminum with matte white powder coat finish | Base foot pads | Black non-slip rubber pads attached to each foot end |
| Tabletop edge trim | Smooth rounded integrated resin edge | Hardware fasteners | Stainless steel assembly bolts |
| Surface coating | UV-stabilized matte polyester powder coat | Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints |
| Reference Finish / Color Count | Recommended 6finish options | Tabletop drainage | Integrated parallel surface grooves direct rainwater off tabletop to eliminate pooling |
| Stable freestanding placement | 4-prong cross base distributes weight evenly to prevent tipping on level paved surfaces | Unobstructed leg room | Single central pedestal eliminates corner legs, allowing full 360-degree leg access for seated users |
| Tool-enabled assembly | Knock-down design connects tabletop, column and base with included hardware for on-site setup | Surface maintenance | Non-porous smooth surface wipes clean with mild soap and water, no sealing or painting required |
| Leveling compatibility | Base foot pads accommodate minor surface unevenness without separate adjustment glides | Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Packaging Volume | 0.8 m³/set | Reference Packaged Gross Weight | 120 kg/set |
| Commercial outdoor cafe seating | Pairs with two bistro chairs for sidewalk coffee shop or restaurant patio dining | Residential patio/balcony use | Compact footprint fits small residential balconies, terraces or backyard patio spaces |
| Poolside leisure placement | Weatherproof construction resists water splashes and humidity for poolside seating areas | Temporary event setup | Lightweight knock-down design suits pop-up markets, outdoor events and catering setups |
| Break area outdoor seating | Appropriate for office outdoor break zones or staff courtyard dining areas | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 700 × 700 × 760 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Central support column diameter | 76 mm | |
| Cross base total spread | 680 mm | |
| Base foot width | 80 mm | |
| Undertable knee clearance height | 720 mm | |
| Tabletop edge overhang from column | 312 mm | |
| Base foot height from ground | 30 mm | |
| Tabletop drainage groove width | 8 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 15 kg | |
|---|---|---|
| Static tabletop uniform load capacity | 100 kg | |
| Recommended seating capacity | 2 people | |
| Outdoor weather durability rating | 5 years | |
| Surface stain resistance | Grade 5 | |
| Base slip resistance static coefficient | 0.6 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | Matte white weather-resistant HDPE resin with integrated parallel drainage grooves | |
|---|---|---|
| Central support column | Powder-coated white aluminum alloy tube | |
| 4-prong cross base | Die-cast aluminum with matte white powder coat finish | |
| Base foot pads | Black non-slip rubber pads attached to each foot end | |
| Tabletop edge trim | Smooth rounded integrated resin edge | |
| Hardware fasteners | Stainless steel assembly bolts | |
| Surface coating | UV-stabilized matte polyester powder coat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Tabletop drainage | Integrated parallel surface grooves direct rainwater off tabletop to eliminate pooling | |
|---|---|---|
| Stable freestanding placement | 4-prong cross base distributes weight evenly to prevent tipping on level paved surfaces | |
| Unobstructed leg room | Single central pedestal eliminates corner legs, allowing full 360-degree leg access for seated users | |
| Tool-enabled assembly | Knock-down design connects tabletop, column and base with included hardware for on-site setup | |
| Surface maintenance | Non-porous smooth surface wipes clean with mild soap and water, no sealing or painting required | |
| Leveling compatibility | Base foot pads accommodate minor surface unevenness without separate adjustment glides | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Commercial outdoor cafe seating | Pairs with two bistro chairs for sidewalk coffee shop or restaurant patio dining | |
|---|---|---|
| Residential patio/balcony use | Compact footprint fits small residential balconies, terraces or backyard patio spaces | |
| Poolside leisure placement | Weatherproof construction resists water splashes and humidity for poolside seating areas | |
| Temporary event setup | Lightweight knock-down design suits pop-up markets, outdoor events and catering setups | |
| Break area outdoor seating | Appropriate for office outdoor break zones or staff courtyard dining areas |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements for general public use | |
|---|---|---|
| EN 581-3:2017 | Mechanical safety and structural performance test methods for outdoor tables | |
| EN 1022:2018 | Domestic and contract furniture stability test methods for freestanding tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for resin-composite outdoor table structural stability testing | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture finishes, applicable for tabletop durability validation | |
| GB/T 17657-2013 | Test methods for evaluating physical and chemical properties of wood-based panels, applicable for resin tabletop material performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for resin-composite outdoor table structural stability testing; 2. GB/T 4893.8-2013: Surface wear resistance test method for furniture finishes, applicable for tabletop durability validation; 3. GB/T 17657-2013: Test methods for evaluating physical and chemical properties of wood-based panels, applicable for resin tabletop material performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp