| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 550 x 550 x 550 mm | |
|---|---|---|
| tabletop diameter | 550 mm | |
| tabletop thickness | 48 mm | |
| central pedestal column diameter | 76 mm | |
| cross base total span | 520 mm | |
| individual base prong length | 230 mm | |
| ground clearance under base | 10 mm | |
| floor glide diameter | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| net product weight | 5.6 kg | |
|---|---|---|
| maximum static tabletop load capacity | 82 kg | |
| base static stability load | 110 kg | |
| recommended maximum place setting count | 1 user | |
| coating scratch resistance rating | 2H | |
| limited warranty period | 90 days | |
| available standard color count | 6 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop panel | 1.5mm thick powder-coated steel | |
|---|---|---|
| central support column | 1.2mm thick welded steel tube | |
| 4-prong cross base | 2.0mm thick pressed steel | |
| floor protection glides | Injection-molded TPE rubber | |
| assembly fasteners | Stainless steel socket head screws | |
| surface finish system | Electrophoresis primer plus matte white polyester powder coat | |
| edge treatment | Rolled rounded steel tabletop edge | |
| weld joints | Continuous MIG welds at column-base connection | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| floor leveling adjustment | 5mm vertical adjustment via threaded TPE glides | |
|---|---|---|
| weather exposure suitability | Full outdoor use with IPX4 water resistance | |
| assembly requirement | Knock-down assembly with 3 connection points | |
| surface cleaning compatibility | Wipe-clean non-porous finish | |
| mobility | Lightweight single-person lift weight | |
| floor protection | Non-marking rubber glides | |
| UV degradation resistance | UV-stabilized powder coating | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| residential patio placement | Position adjacent to outdoor seating for beverage and snack access | |
|---|---|---|
| balcony accent use | Serve as small plant stand or drink table for apartment balconies | |
| poolside lounge support | Place near chaise lounges for towels, drinks and personal items | |
| commercial bistro auxiliary table | Use as extra surface for outdoor cafe seating areas | |
| garden pathway accent | Position along garden paths for decorative display or resting items | |
| indoor sunroom use | Coordinate with casual indoor-outdoor seating in enclosed porches |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for domestic use, applicable for general safety compliance | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical safety test methods, applicable for load and stability validation | |
| EN 1022:2018 | Furniture stability determination test standard, applicable for tip resistance verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural safety verification | |
|---|---|---|
| GB/T 17657-2013 | Surface physical property test methods for furniture finishes, applicable for coating durability checks | |
| GB/T 16422.3-2013 | UV weathering test methods, applicable for outdoor material aging resistance verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural safety verification; 2. GB/T 17657-2013: Surface physical property test methods for furniture finishes, applicable for coating durability checks; 3. GB/T 16422.3-2013: UV weathering test methods, applicable for outdoor material aging resistance verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
