| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 940 x 940 x 711 mm | |
|---|---|---|
| Table apron to floor clearance | 676 mm | |
| Table slat top thickness | 35 mm | |
| Chair overall dimensions per unit | 579 x 640 x 889 mm | |
| Chair seat height from floor | 432 mm | |
| Chair seat usable dimensions | 495 x 457 mm | |
| Chair backrest height above seat | 508 mm | |
| Chair armrest height from floor | 635 mm | |
| Pedestal cross base footprint | 610 mm wide cross spread | |
| Metal frame tube diameter | 32 mm | |
| Slat width for table and chairs | 60 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Static load capacity per chair | 159 kg | |
|---|---|---|
| Chair stacking height capacity | 8 chairs high | |
| Whole set packaged gross weight | 73 kg | |
| UV resistant coating durability | 1500 hours | |
| Chair frame corrosion resistance rating | 1000 hours salt spray | |
| Slat surface static friction coefficient | 0.6 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame construction | 1.2mm thick carbon steel tube with black powder coating | |
|---|---|---|
| Table and chair slat panels | 1.0mm thick powder-coated steel horizontal slats, riveted to frame | |
| Table central pedestal base | Thick-walled steel column with cross-shaped steel foot base | |
| Chair leg bottom glides | Injection-molded non-scratch plastic floor glides | |
| Surface finish system | Electrophoretic primer plus black polyester powder topcoat | |
| Hardware fasteners | Stainless steel bolts, nuts and washers for all assembly joints | |
| Armrest construction | Curved integrated steel tube armrests matching frame finish | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Chair stackable storage | Armchairs nest vertically for off-season storage, up to 8 units per stack | |
|---|---|---|
| Water shedding slat design | Gapped horizontal slats drain rainwater immediately to prevent pooling | |
| Quick assembly hardware | All joints use knockdown bolted connections with included hex key | |
| Leveling stability on hard surfaces | Pedestal cross base provides four contact points for even weight distribution | |
| All-weather outdoor use | Coated metal construction resists rain, sun exposure and mild temperature extremes | |
| Easy wipe-clean maintenance | Smooth powder-coated surfaces wipe clean with water and mild detergent | |
| Fixed dining position design | Stationary non-swivel, non-rocking chairs for stable upright dining posture | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio and deck use | Suitable for small home decks, courtyards and balcony dining spaces | |
|---|---|---|
| Small balcony bistro dining | Appropriate for apartment balconies requiring weatherproof, stackable seating | |
| Commercial outdoor cafe seating | Suitable for low-traffic cafe, kiosk or beer garden casual dining use | |
| Poolside lounge dining | Resistant to occasional water splashes and humid poolside environments | |
| Rooftop terrace installation | Lightweight but stable construction works for weight-limited rooftop outdoor spaces | |
| Four-person casual tea or coffee service | Square table layout evenly serves four place settings for drinks and light meals |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use | Applicable as general safety and performance standard for domestic outdoor dining sets | |
|---|---|---|
| EN 581-2:2019 Outdoor furniture - Mechanical safety requirements for seating | Applicable for verifying chair static load, stability and durability performance | |
| EN 581-3:2019 Outdoor furniture - Mechanical safety requirements for tables | Applicable for verifying table static load, stability and structural integrity |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for furniture | Applicable as structural safety and dimensional tolerance acceptance baseline for metal outdoor furniture | |
|---|---|---|
| GB/T 1732-2020 Determination of impact resistance of paint films | Applicable for verifying coating durability against impact from mugs or tableware | |
| GB/T 1865-2009 Paints and varnishes - Artificial weathering exposure | Applicable for validating UV and weather resistance of the black powder coat finish |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for furniture: Applicable as structural safety and dimensional tolerance acceptance baseline for metal outdoor furniture; 2. GB/T 1732-2020 Determination of impact resistance of paint films: Applicable for verifying coating durability against impact from mugs or tableware; 3. GB/T 1865-2009 Paints and varnishes - Artificial weathering exposure: Applicable for validating UV and weather resistance of the black powder coat finish; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
