| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1830 x 950 x 750 mm | |
|---|---|---|
| Tabletop slat thickness | 25 mm | |
| Tabletop edge profile thickness | 40 mm | |
| Leg cross-section dimension | 60 x 60 mm square | |
| Leg wall thickness | 1.5 mm | |
| Umbrella hole diameter | 50 mm | |
| Under-table knee clearance height | 680 mm | |
| Leg inset from table corner | 50 mm | |
| Slat gap width for drainage | 8 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load capacity | 136 kg | |
|---|---|---|
| Seating capacity | 6 people | |
| Product net weight | 26 kg | |
| Recommended maximum point load per tabletop section | 27 kg | |
| Outdoor weather durability rating | 5 years service life for normal residential patio use | |
| Adjustable foot height adjustment range | 10 mm | |
| Fastener corrosion resistance grade | Grade 304 stainless steel | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Support frame and legs | Dark grey powder-coated metal alloy | |
|---|---|---|
| Tabletop slats | Weather-resistant WPC composite slats | |
| Frame surface finish | Matte dark grey powder coating | |
| Hardware fasteners | Stainless steel bolts and connectors | |
| Levelling feet | Non-slip nylon base pads | |
| Umbrella hole insert ring | Durable plastic cap and ring | |
| Frame joint connectors | Die-cast metal corner brackets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Slatted tabletop drainage | Horizontal slat gaps allow rainwater runoff without pooling | |
|---|---|---|
| Center umbrella hole compatibility | Fits standard 48 mm diameter patio umbrella poles | |
| Levelling foot adjustment | Rotating foot pads compensate for uneven patio surfaces up to 10 mm | |
| Knock-down assembly | Ships disassembled with required hardware for on-site build | |
| Surface cleanability | Smooth non-porous slat surface wipes clean with mild detergent | |
| UV resistance | Frame and top finish resists fading under prolonged sun exposure | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential patio and courtyard dining | Accommodates 6 diners for regular outdoor family meals and gatherings | |
|---|---|---|
| Commercial balcony outdoor seating | Suitable for cafe, restaurant, or bar outdoor seating areas with standard dining chairs | |
| Poolside dining setups | Corrosion-resistant materials withstand splashed water and high humidity environments | |
| Garden entertaining spaces | Dark neutral finish complements modern landscape and hardscape design schemes | |
| Covered outdoor lounge areas | Drainage slat design handles occasional rain exposure without permanent damage | |
| Year-round temperate outdoor use | Weather-resistant construction holds up to sun, light rain and temperature fluctuations |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture seating and tables safety requirements | Applicable for general outdoor domestic patio furniture safety validation | |
|---|---|---|
| EN 581-3:2017 Outdoor furniture tables mechanical safety requirements | Applicable for structural load and stability performance testing |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for furniture | Applicable for structural stability and finish durability acceptance for outdoor metal furniture | |
|---|---|---|
| GB/T 17657-2013 Test methods for surface properties of furniture | Applicable for surface coating abrasion and corrosion resistance testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for furniture: Applicable for structural stability and finish durability acceptance for outdoor metal furniture; 2. GB/T 17657-2013 Test methods for surface properties of furniture: Applicable for surface coating abrasion and corrosion resistance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
