Product supplierRound Marble Pedestal Side Table with Brass Accents, 20 mm polished white marble with subtle grey veining
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 410 × 410 × 630 mm | |
|---|---|---|
| Tabletop diameter | 410 mm | |
| Tabletop thickness including brass trim | 20 mm | |
| Brass edge trim width | 8 mm | |
| Flared brass neck minimum diameter | 45 mm | |
| Flared brass neck connection diameter at top | 220 mm | |
| Conical base top diameter at brass collar | 160 mm | |
| Conical base bottom floor contact diameter | 300 mm | |
| Under-table ground clearance | 0 mm | |
| Recommended adjacent seating arm height clearance | 150 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 19 kg | |
|---|---|---|
| Tabletop static load capacity | 25 kg | |
| Base floor contact static stability load | 40 kg | |
| Marble surface compressive strength | 60 MPa | |
| Recommended maximum placed item diameter | 350 mm | |
| Surface abrasion resistance rating | 2000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop slab | 20 mm polished white marble with subtle grey veining | |
|---|---|---|
| Tabletop edge trim | 1.2 mm thick brushed brass-finish stainless steel band | |
| Central hourglass neck | 1.5 mm thick brass-plated steel flared connector | |
| Collar joint | Brushed brass-finish metal locking ring securing neck to base | |
| Conical base body | 12 mm thick engineered marble-veneer composite tapered cone | |
| Base bottom protective pad | 2 mm thick non-slip felt floor protector | |
| Internal support frame | 1.2 mm thick powder-coated steel inner skeleton | |
| Surface finish | Satin polished, sealed stone with low-sheen lacquer protection | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Support structure | Single central sculptural pedestal with no protruding legs | |
|---|---|---|
| Height configuration | Fixed 630 mm height with no adjustment mechanism | |
| Surface function | Smooth sealed round tabletop supports drinks, table lamps and small decor | |
| Floor protection | Full perimeter felt base pads prevent scratches on hard flooring | |
| Assembly requirement | Minimal 2-point assembly connecting top, neck and base sections | |
| Placement flexibility | 300 mm diameter base footprint fits between seating and tight corners | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Shipping carton dimensions | 500 x 500 x 750 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room placement | Position beside sofas, sectionals and lounge chairs for drink and decor access | |
|---|---|---|
| Bedroom accent use | Place beside beds or reading nooks as a nightstand alternative | |
| Hospitality lounge application | Use in hotel lobbies, VIP suites and lounge waiting areas | |
| Show home staging | Deploy in staged living and bedroom spaces to elevate premium aesthetic | |
| Small space furnishing | Ideal for apartments and compact rooms where full end tables do not fit | |
| Hard floor compatibility | Suitable for wood, tile and polished stone flooring with integrated felt pads |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool