Polished Reddish-Brown Two-Tier Open-Shelf Coffee Table with Stepped Block Legs (model CT-RW-2T-1200) is listed under Traditional Coffee Table, with overall dimensions of 1200 × 600 × 500 mm and main material of MDF. Load capacity: 100 kg. Certifications: glossy,wood,finish,two-tier,open,storage,stepped,block,leg,structure,stationary,rectangular,form. This page consolidates 6 groups of specifications and GB standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall assembled dimensions | 1200 x 600 x 500 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Lower shelf dimensions | 1080 x 480 mm | |
| Lower shelf clearance from floor | 105 mm | |
| Open central void height between tiers | 265 mm | |
| Side support assembly width | 120 mm | |
| Stepped base foot thickness | 25 mm | |
| Tabletop edge overhang | 30 mm | |
| Lower shelf edge thickness | 20 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop distributed static load capacity | 100 kg | |
|---|---|---|
| Assembled product net weight | 26 kg | |
| Surface finish abrasion resistance | 400 cycles | |
| Floor contact pad load distribution | 0.4 MPa | |
| Recommended placement weight tolerance | 500 kg/m² | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface | High-gloss reddish-brown wood veneer over 18mm MDF/plywood substrate | |
|---|---|---|
| Lower shelf panel | Matching reddish-brown veneered engineered wood with raised edge lip | |
| Stepped block side supports | Solid rubberwood/acacia block construction with matching stain finish | |
| Connector hardware | Zinc-plated steel cam-lock and bolt fasteners with pre-drilled holes | |
| Floor protection pads | 5mm thick self-adhesive felt pads affixed to base feet | |
| Top edge profile | Slightly eased 2mm radius edge with layered veneer edge banding |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Storage configuration | Two-tier open design with full-span lower shelf for media, books, and decor | |
|---|---|---|
| Assembly requirement | Knock-down assembly with included hardware and illustrated instructions | |
| Floor stability | Wide stepped base feet for four-point contact on level hard or carpeted floors | |
| Surface maintenance | Stain-resistant glossy finish wipeable with damp soft cloth |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary application | Living room placement in front of sofas for beverage, decor, and remote storage | |
|---|---|---|
| Suitable environments | Residential lounges, office reception areas, and formal meeting waiting spaces |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural quality checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of formaldehyde for wood furniture, applicable for emission testing | |
| GB/T 4893.1-2021 | Furniture surface test for resistance to cold liquids, applicable for finish durability acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural quality checks; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of formaldehyde for wood furniture, applicable for emission testing; 3. GB/T 4893.1-2021: Furniture surface test for resistance to cold liquids, applicable for finish durability acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp