Traditional Red Wood Reception Coffee Table with Integrated Device Controls (model REC-CT-PED-1450R) is listed under Traditional Coffee Table, with overall dimensions of 1450 × 600 × 450 mm and main material of MDF. Load capacity: 136 kg. Certifications: Traditional,formal,styling,solid,wood,frame,integrated,control,module,rounded,safety,edges. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1450 x 600 x 450 mm | |
|---|---|---|
| Table top thickness | 32 mm | |
| Under-table floor clearance | 370 mm | |
| Pedestal base width | 200 mm | |
| Base plinth height | 48 mm | |
| Rounded edge radius | 15 mm | |
| Open central undercroft length | 1050 mm | |
| Control module width | 180 mm | |
| Pedestal base depth | 580 mm | |
| Table top overhang | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static distributed table top load | 136 kg | |
|---|---|---|
| Product net weight | 55 kg | |
| Maximum point load capacity | 45 kg | |
| Recommended number of seated users | 4 | |
| Finish scratch resistance rating | 4H | |
| Warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table top panel | Solid wood core with 0.6mm mahogany-toned veneer, 0.2mm polyurethane clear coat | |
|---|---|---|
| Pedestal supports | Engineered wood core with matching wood veneer, corner block reinforced joints | |
| Base plinths | Solid wood edging with non-marring felt floor glides | |
| Integrated control module | ABS plastic bezel with membrane switch buttons, 1.8m hardwired power cord | |
| Joinery hardware | Zinc-plated steel wood screws and dowel connectors, corrosion resistant finish | |
| Edge molding | Solid wood edge banding with eased rounded profile |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Floor leveling adjustment | Adjustable hidden glides on base plinths for uneven floor compensation | |
|---|---|---|
| Cable routing channel | Concealed under-top channel to run power cords from control module to floor outlet | |
| Cleanable surface finish | Stain-resistant sealed wood finish suitable for daily sanitization in public waiting areas | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office reception waiting areas | Formal styling matches executive office and government reception lounge settings | |
|---|---|---|
| Corporate boardroom lounge zones | Low height suitable for placement between upholstered lounge seating groups |
EU Market Access Requirements* EN Standards
| EN 15372:2008 | Performance requirements for non-domestic storage and lounge furniture, applicable for structural load testing | |
|---|---|---|
| EN 13722:2004 | Test methods for furniture surface finish durability, applicable for scratch and stain resistance |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Performance standard for desk and lounge table products, applicable for static load and stability testing | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Sustainability standard for furniture, applicable for material emissions and environmental compliance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, required for formaldehyde emission compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance and finish quality; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, required for formaldehyde emission compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp