Industrial Backless Planked Wood Top Dining Bench with Black Metal Sled Legs (model DB-WDPLK-BKSLD-1780) is listed under Traditional Coffee Table, with overall dimensions of 1780 × 460 × 480 mm and main material of MDF. Load capacity: 272 kg. Certifications: industrial,style,backless,design,sled,leg,construction,wood,seat,metal,frame. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions | 1780 x 460 x 480 mm | |
|---|---|---|
| Seat height | 480 mm | |
| Seat usable width | 1700 mm | |
| Seat usable depth | 410 mm | |
| Seat plank thickness | 38 mm | |
| Metal leg tubing thickness | 1.5 mm | |
| Leg frame height | 440 mm | |
| End leg frame span width | 400 mm | |
| Floor clearance under seat | 340 mm | |
| Edge bevel radius | 12 mm | |
| Horizontal stretcher height | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static load capacity | 272 kg | |
|---|---|---|
| Seating capacity | 3 adults | |
| Net product weight | 21 kg | |
| Vertical leg frame static load rating | 136 kg per end frame | |
| Floor protector load distribution | 68 kg per foot pad | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat planks | Solid natural hardwood with matte lacquer seal, visible grain | |
|---|---|---|
| Frame construction | Matte black powder-coated steel tubing | |
| Frame finish | Textured powder coat, scratch and rust resistant for indoor/dry patio use | |
| Seat edge trim | Matching black metal perimeter frame securing wood planks | |
| Foot pads | Non-marking rubber caps installed on each frame foot | |
| Mounting hardware | Zinc-plated steel bolts securing seat to frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Backless multi-person bench for straight alignment along dining tables | |
|---|---|---|
| Floor protection | Rubber foot pads prevent scratching on hard flooring surfaces | |
| Structural bracing | Integrated lower horizontal stretcher on each leg frame eliminates lateral wobble | |
| Assembly configuration | Knocked-down flat pack design, seat attaches to pre-welded leg frames |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining spaces | Positioned along one side of rectangular dining tables to accommodate extra guests | |
|---|---|---|
| Entryway/mudroom use | Placed against walls for temporary seating while putting on or removing footwear |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - strength, durability for domestic seating, applicable for home dining use | |
|---|---|---|
| EN 1022:2018 | Domestic seating stability testing, applicable for tip resistance assessment |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wooden seat structure | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable to steel frame performance | |
| GB 28007-2011 | General safety requirements for children's furniture if used in family dining spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wooden seat structure; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable to steel frame performance; 3. GB 28007-2011: General safety requirements for children's furniture if used in family dining spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp