| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 510 x 450 mm | |
|---|---|---|
| Top surface overhang per end | 300 mm | |
| Top material thickness | 10 mm | |
| Carcass panel thickness | 18 mm | |
| Internal storage compartment height | 280 mm | |
| Storage compartment opening width | 1800 mm | |
| Base plinth height | 50 mm | |
| Cable port diameter | 60 mm | |
| Rear ventilation slot width | 1200 mm | |
| End taper angle | 15 degrees | |
| Maximum supported TV base width | 2100 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Top surface static load capacity | 110 kg | |
|---|---|---|
| Maximum compatible TV size | 85 inches | |
| Drawer slide cycle rating | 50000 cycles | |
| Door hinge cycle rating | 80000 cycles | |
| Finish abrasion resistance | 40000 cycles | |
| Product net weight | 80 kg | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
Core acceptance fields · Panels / hardware / frame / upholstery
| Top surface | 10mm smoked tempered glass | |
|---|---|---|
| Edge trim | Polished stainless steel | |
| Body frame inlay | Dark walnut wood veneer over engineered wood | |
| Front storage panels | Matte light gray lacquered MDF | |
| Base plinth | Powder-coated steel with wrapped wood veneer | |
| Internal shelves | 18mm E1-grade engineered wood | |
| Hardware | Zinc alloy soft-close hinges and slides | |
| Rear panel | 8mm hardboard with ventilation slots | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Enclosed front storage | Two equal-width soft-close compartments for media accessories and devices | |
|---|---|---|
| Cable management system | Dual rear 60mm cable ports with routed channels for AV wiring | |
| Ventilation design | 1200mm long recessed rear air slots to prevent AV equipment overheating | |
| Soundbar placement | 200mm tall recessed lower front bay to accommodate center-channel soundbars | |
| Surface leveling | Integrated hidden adjustable floor glides for uneven floor alignment | |
| Rear access panel | Removable rear panel for wiring and equipment installation access | |
| Soft-close mechanism | All storage doors/drawers feature damped closure to prevent slamming | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Living room placement | Positioned against main wall below wall-mounted or stand-mounted large screen televisions | |
|---|---|---|
| Open-plan lounge spaces | Suited for modern luxury, minimalist or contemporary interior design schemes | |
| Media room installation | Supports full AV setups including soundbars, streaming devices and game consoles | |
| Condo and apartment spaces | Narrow depth design fits compact living spaces without blocking walkways | |
| Recommended pairing | Match with low-profile modular sofas and minimalist coffee tables for cohesive living room sets |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops - safety requirements, applicable for cabinet stability | |
|---|---|---|
| EN 12521:2015 | Furniture - strength, durability and safety for domestic storage furniture, applicable for load testing | |
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass, applicable for top glass material verification |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for carcass performance and finish testing | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture, applicable for engineered wood substrate quality verification | |
| GB 18584-2001 | Indoor decoration materials - limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for carcass performance and finish testing; 2. GB/T 4897.3-2003: Particleboard for furniture, applicable for engineered wood substrate quality verification; 3. GB 18584-2001: Indoor decoration materials - limit of harmful substances in wooden furniture, applicable for formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
