Product supplierPneumatic Mid-Back Executive Office Chair, Green woven fabric or leather-look textile over molded foam; exact face material requires supplier BOM confirmation.
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 730 × 660 × 1100 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 136 kg | |
|---|---|---|
| Net weight | 16.5 kg | |
| Static seat verification load | 680 kg | |
| Caster rolling durability target | 100000 cycles | |
| Gas-lift cycles target | 100000 cycles | |
| Backrest cyclic load target | 120000 cycles | |
| Armrest vertical static load target | 90 kg per arm | |
| Seat foam density | 45 kg/m3 | |
| Back foam density | 35 kg/m3 | |
| Foam resilience | 40% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Green woven fabric or leather-look textile over molded foam; exact face material requires supplier BOM confirmation. | |
|---|---|---|
| Back upholstery | Padded two-section green back with a light-colored rear panel and stitched perimeter. | |
| Seat cushion | Molded high-resilience foam, 80 mm thick at the center over a load-bearing seat shell. | |
| Internal back board | 12 mm molded plywood or polymer back board with steel reinforcement brackets. | |
| Armrests | Fixed black polymer arm pads on black curved support posts connected to the seat mechanism. | |
| Gas lift | 45 mm diameter chromed steel pneumatic cylinder with black telescopic sleeve. |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Pneumatic height adjustment | Side lever raises and lowers the seat from 460 to 510 mm through a 50 mm gas-lift stroke. | |
|---|---|---|
| Tilt movement | Center-tilt mechanism allows synchronized seat and back recline to a 12-degree rearward angle. | |
| Tilt lock and tension | Single lever locks the upright position; tension knob adjusts resistance for users up to 136 kg. | |
| Mobility | Five twin-wheel swivel casters enable rolling on hard floors or low-pile carpet. |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton dimensions | 760 x 660 x 420 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Managerial and administrative workstations | Suitable for 8-hour desk work where padded lumbar support, swivel access and 510 mm seat height support standard 760 mm desks. | |
|---|---|---|
| Meeting rooms and private offices | Green upholstery and polished aluminum base suit executive offices, meeting rooms and reception workstations with hard floors or low-pile carpet. |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 | Office furniture seating dimensions: applies to seat height, depth, clearance and ergonomic dimensional verification. | |
|---|---|---|
| EN 1335-2 | Office furniture seating safety requirements: applies to structural safety and stability verification. | |
| EN 1335-3 | Office furniture seating test methods: applies to strength, durability and stability acceptance testing. |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 | Office chairs standard: applies to stability, back, seat, arm, base and caster durability verification. | |
|---|---|---|
| BIFMA e3 level | Multi-attribute sustainability certification is optional and must be evidenced by the supplier before claiming compliance. |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2 | Furniture mechanical test for chairs and stools: backrest strength and durability applies to procurement verification. | |
|---|---|---|
| GB/T 10357.3 | Furniture mechanical test for chairs and stools: seat front edge and static/dynamic loading applies. | |
| GB/T 27927 | Office chair classification and performance requirements can guide commercial-grade inspection scope. |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2: Furniture mechanical test for chairs and stools: backrest strength and durability applies to procurement verification.; 2. GB/T 10357.3: Furniture mechanical test for chairs and stools: seat front edge and static/dynamic loading applies.; 3. GB/T 27927: Office chair classification and performance requirements can guide commercial-grade inspection scope.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool