Product supplierGreen Upholstered Cantilever Visitor Chair with Chrome Sled Frame, Green padded upholstery over a layered cushion assembly
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 580 × 470 × 1080 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 14.5 kg | |
|---|---|---|
| Rated static load | 160 kg | |
| Recommended user weight | 120 kg | |
| Seating capacity | 1 person | |
| Back support height | 640 mm | |
| Floor glide load area | 4 contact points | |
| Frame tube static deflection limit | L/100 at 160 kg | |
| Foam compression set acceptance | 8 percent after 22 hours at 70 degrees C | |
| Upholstery abrasion acceptance | 50,000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Green padded upholstery over a layered cushion assembly | |
|---|---|---|
| Back upholstery | Green upholstered two-zone back with beige rear panel visible in side view | |
| Cushion core | Molded polyurethane foam, 90 mm seat and 80 mm lumbar thickness | |
| Internal support board | 12 mm molded plywood or composite seat board | |
| Arm pads | Green upholstered pads mounted over curved steel arm supports | |
| Cantilever frame | 25 x 2.0 mm chrome-plated steel tube with continuous sled base |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever support | Continuous chrome sled frame flexes slightly under load without tilt, swivel, or height adjustment | |
|---|---|---|
| Fixed seated posture | 460 mm seat height and 470 mm seat depth provide upright reception or conference posture | |
| Integrated arm support | Curved arm supports connect the back/seat area to the sled legs and terminate in padded armrests | |
| Floor protection and movement | Four polymer glides protect flooring and permit limited repositioning by lifting or sliding |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton count | 1 flat-packed or semi-knocked-down carton per chair | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Recommended Matching Desk Size | 2.4 m executive desk | |
|---|---|---|
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139 applicability | Non-domestic seating strength, durability, and safety for contract visitor chairs | |
|---|---|---|
| EN 1022 applicability | Seating stability determination for forward and rearward tipping risk | |
| EN 14465 applicability | Upholstery fabric abrasion, pilling, and color-fastness assessment if fabric is specified |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 applicability | General-purpose office chair back, seat, arm, leg strength, and stability tests | |
|---|---|---|
| ANSI/BIFMA e3 applicability | Furniture sustainability, material, energy, and social-responsibility credits if supplier documentation is available |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 applicability | Furniture strength and durability test for seating: back and seat static loading | |
|---|---|---|
| GB/T 10357.6 applicability | Furniture test for seating arm downward static load | |
| GB/T 10357.7 applicability | Furniture seating stability test for a non-swivel four-contact chair |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 applicability: Furniture strength and durability test for seating: back and seat static loading; 2. GB/T 10357.6 applicability: Furniture test for seating arm downward static load; 3. GB/T 10357.7 applicability: Furniture seating stability test for a non-swivel four-contact chair; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool