Upholstered Visitor Chair with Chrome Cantilever Base (model VC-CAN-660640-1000) is listed under Executive Boss Chair. Dimensions: 660 × 640 × 1000 mm. Materials: Beige upholstered padded seat, likely leather, synthetic leather or fabric; exact surface material requires supplier BOM confirmation. Load capacity: 160 kg. Product Features: upholstered,visitor,chair,cantilever,sled,base,fixed,armrests,padded,back. This page consolidates 6 groups of specifications, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | FENGGUAN | Model | VC-CAN-660640-1000 |
| Overall dimensions (W × D × H) | 660 × 640 × 1000 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Net weight | 15 kg |
| Rated static load capacity | 160 kg | Recommended user body weight | 120 kg |
| Seating capacity | 1 person | Back static load test target | 76 kg |
| Seat impact durability target | 100,000 cycles | Cushion compression set acceptance | Less than 8 percent after 72 hours |
| Frame oscillation allowance | Less than 8 mm lateral movement at top of back | Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
| Back Foam Density Reference | 38 kg/m³ | Seat upholstery | Beige upholstered padded seat, likely leather, synthetic leather or fabric; exact surface material requires supplier BOM confirmation |
| Backrest upholstery | Padded upholstered back with light front face and tan outer shell/back panel | Armrest construction | Fixed padded arm pads integrated with upholstered side panels and 90 mm visible thickness |
| Internal cushioning | Molded polyurethane foam over a load-bearing seat board; 80 mm seat and 90 mm back thickness used as procurement assumptions | Support frame | Polished chrome-plated welded steel cantilever frame with two continuous sled runners |
| Floor protection | Hard plastic or rubber end glides fitted to each sled runner to protect flooring | Seating mechanism | Fixed non-swivel, non-reclining cantilever chair providing direct visitor seating with no user controls |
| Back support | Continuous padded medium-high back set at a fixed reception-chair angle for upright meeting posture | Arm support | Integrated fixed armrests at 660 mm floor height for forearm support during meetings and waiting areas |
| Base movement | Cantilever sled base allows slight controlled flex while all four runner ends remain floor-contacting | Carton count | 1 carton per chair |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Carton Dimensions | 850× 420× 720 mm | Reference Packaged Gross Weight | 23 kg/set |
| Reference Carton Volume | 0.26 m³/set | Reception and meeting use | Suited to visitor areas, conference rooms and executive meeting spaces because it provides fixed upright support, integrated arms and a formal upholstered appearance |
| Workstation visitor placement | Can be placed in front of desks or in open-office waiting zones where a non-caster, quiet sled-base chair is preferred | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 640 × 1000 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 15 kg | |
|---|---|---|
| Rated static load capacity | 160 kg | |
| Recommended user body weight | 120 kg | |
| Seating capacity | 1 person | |
| Back static load test target | 76 kg | |
| Seat impact durability target | 100,000 cycles | |
| Cushion compression set acceptance | Less than 8 percent after 72 hours | |
| Frame oscillation allowance | Less than 8 mm lateral movement at top of back | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Beige upholstered padded seat, likely leather, synthetic leather or fabric; exact surface material requires supplier BOM confirmation | |
|---|---|---|
| Backrest upholstery | Padded upholstered back with light front face and tan outer shell/back panel | |
| Armrest construction | Fixed padded arm pads integrated with upholstered side panels and 90 mm visible thickness | |
| Internal cushioning | Molded polyurethane foam over a load-bearing seat board; 80 mm seat and 90 mm back thickness used as procurement assumptions | |
| Support frame | Polished chrome-plated welded steel cantilever frame with two continuous sled runners | |
| Floor protection | Hard plastic or rubber end glides fitted to each sled runner to protect flooring |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating mechanism | Fixed non-swivel, non-reclining cantilever chair providing direct visitor seating with no user controls | |
|---|---|---|
| Back support | Continuous padded medium-high back set at a fixed reception-chair angle for upright meeting posture | |
| Arm support | Integrated fixed armrests at 660 mm floor height for forearm support during meetings and waiting areas | |
| Base movement | Cantilever sled base allows slight controlled flex while all four runner ends remain floor-contacting |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton count | 1 carton per chair | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Reception and meeting use | Suited to visitor areas, conference rooms and executive meeting spaces because it provides fixed upright support, integrated arms and a formal upholstered appearance | |
|---|---|---|
| Workstation visitor placement | Can be placed in front of desks or in open-office waiting zones where a non-caster, quiet sled-base chair is preferred |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp