Product supplierTwo-Tone Padded Visitor Chair with Chrome Cantilever Sled Base, Padded two-tone upholstered panels with ivory seating surfaces and tan outer trim
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 720 × 660 × 1040 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 14 kg | |
|---|---|---|
| Recommended occupant load | 160 kg | |
| Cantilever frame static verification load | 320 kg | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 30 kg/m3 | |
| Foam rebound rating | 35% | |
| Upholstery abrasion acceptance target | 50000 Martindale cycles | |
| Color options | 2 colors | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | Padded two-tone upholstered panels with ivory seating surfaces and tan outer trim | |
|---|---|---|
| Cushion core | Molded polyurethane foam under the upholstered seat and back | |
| Internal support board | 12 mm molded plywood or composite load board inside the seat cushion | |
| Arm pads | Upholstered pads matching the ivory seat material, mounted on curved chrome supports | |
| Cantilever frame | Polished chrome-plated steel tube formed as a continuous sled base with rear risers | |
| Floor protection | Black polymer glides fitted at four floor-contact points |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating movement | Fixed non-swivel visitor seating position with a resilient cantilever sled base | |
|---|---|---|
| Back support | Contoured high back with integrated lumbar curve and side wraps for upright meeting posture | |
| Arm support | Fixed curved arm loops with padded contact surfaces at 230 mm above seat level | |
| Floor placement | Four-point sled contact with polymer glides for hard floors and reduced sliding noise |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Export carton dimensions | 780 x 690 x 360 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Meeting and reception use | Suited to visitor rooms, executive meeting areas, and reception seating because the 450 mm fixed seat height pairs with standard 760 mm tables | |
|---|---|---|
| Commercial project installation | Suitable for bulk conference or consulting-room layouts where non-swivel sled bases reduce floor movement and simplify maintenance |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Office furniture seating safety | Recommended references: EN 1335 | |
|---|---|---|
| Office furniture seating dimensions | EN 1335is applicable for checking the fixed 450 mm seat height and clearances against office-seating requirements | |
| Upholstered furniture fire behavior | EN 1021cigarette ignition and EN 1021 match ignition apply if fire-rated upholstery is required |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Office chair structural validation | ANSI/BIFMA X5.1 provides static, impact, fatigue, and stability acceptance procedures for general-purpose office seating | |
|---|---|---|
| Cantilever durability focus | ANSI/BIFMA X5.1 seat-back cyclic and leg-strength clauses are relevant to the fixed steel sled frame |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Furniture mechanical safety | GB/T 10357.2 applies to chair stability and should be verified for the fixed cantilever base | |
|---|---|---|
| Upholstered furniture labeling | GB 20400 applies when leather or coated fabric is supplied and requires restricted-substance documentation |
Standardized tender description text
This product must meet the following technical requirements: 1. Furniture mechanical safety: GB/T 10357.2 applies to chair stability and should be verified for the fixed cantilever base; 2. Upholstered furniture labeling: GB 20400 applies when leather or coated fabric is supplied and requires restricted-substance documentation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool