Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	9.5 kg
Recommended user weight capacity	140 kg
Seat loading area	0.29 m2
Number of occupants	1
Frame static proof-load target	280 kg
Foam compression set target	8 percent after 22 hours at 70 degrees C
Upholstery abrasion target	30,000 Martindale cycles
Floor load concentration	35 kg per leg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Structural shell and legs	Walnut-veneered bent plywood, 18 mm nominal thickness, forming continuous side, seat-support and leg profiles
Seat and back padding	White upholstered cushion pads, 60 mm nominal thickness, attached within the plywood shell
Face upholstery	White woven textile or leather-look upholstery with sewn edge piping
Cushion substrate	Molded plywood or engineered-composite support board bonded to the main bent shell
Edge treatment	Exposed walnut veneer edge with clear protective finish and contrasting white pad trim
Floor contacts	Hard glide surfaces integrated into tapered plywood leg ends

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Reclined lounge posture	Fixed 12-degree seat pitch and 18-degree back recline provide relaxed seating without user adjustment
Integrated side support	The raised left shell wing wraps around the cushion to provide lateral torso and arm support
Fixed structural stance	Four tapered shell-integrated legs transfer load directly to the floor with no swivel, folding, or rocking mechanism
Cushion retention	Seat and back pads are captured between bent plywood flanges for fixed alignment and simplified upholstery replacement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Assembly time	15 minutes
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Lounge and reception settings	Suitable for designer lounges, hotel lobbies, executive waiting zones and showrooms where sculptural seating is visually prominent
Residential living spaces	Suited to living rooms, reading corners and bedroom lounge areas with hard or polished floors using protective glides

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Seating strength and durability	EN 16139 non-domestic seating strength and durability test method
Stability	EN 1022 fixed seating stability test method
Upholstered furniture burning	EN 1021cigarette ignition test for upholstery combinations
Formaldehyde panels	EN 13986 wood-based panel formaldehyde classification

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Furniture mechanical safety	GB/T 10357.2 through GB/T 10357.3 strength and stability test methods
Formaldehyde emission	GB 18580 indoor decorative wood-based panel requirement
Upholstered furniture behavior	GB 17927 anti-ignition assessment for upholstered soft furniture

Standardized tender description text

This product must meet the following technical requirements:
1. Furniture mechanical safety: GB/T 10357.2 through GB/T 10357.3 strength and stability test methods;
2. Formaldehyde emission: GB 18580 indoor decorative wood-based panel requirement;
3. Upholstered furniture behavior: GB 17927 anti-ignition assessment for upholstered soft furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LCH-SCULPT-760-WAL-WHT

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LCH-SCULPT-760-WAL-WHT

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LCH-SCULPT-760-WAL-WHTOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Sculptural Walnut Plywood Lounge Chair with White Upholstered Pads is a modern lounge seating piece defined by a continuous bent walnut plywood form and contrasting white cushioning. Its shell integrates the side profile, seat support, and tapered legs into one sculptural stance, while exposed walnut edges create a clear visual boundary around the upholstered pads. The raised left shell wing wraps around the cushion to provide integrated lateral torso and arm support, giving the chair an asymmetric, design-forward silhouette suitable for prominent placement. Construction centers on walnut-veneered bent plywood with a nominal 18 mm thickness, shaped into the structural shell and leg profiles. White seat and back pads sit within the plywood form, with cushion support provided by molded plywood or an engineered-composite board bonded to the main shell. The face upholstery is offered in white woven textile or a leather-look finish, finished with sewn edge piping. Exposed walnut veneer edges receive a clear protective finish, and hard glide surfaces are integrated into the tapered leg ends. The pads are captured between bent plywood flanges, maintaining fixed alignment while simplifying upholstery replacement. Designed for a relaxed lounge posture, the chair uses a fixed 12-degree seat pitch and 18-degree back recline, requiring no user adjustment. The finished seat cushion is 90 mm thick, the backrest padding is 70 mm thick, and the lumbar support zone is 240 mm high. A 540 mm clear width between armrests and a single-occupant layout make it suited to individual seating. The fixed structure does not swivel, fold, or rock. It has a net weight of 9.5 kg and a recommended user weight capacity of 140 kg. Product targets include a 280 kg frame static proof load, 8 percent foam compression set after 22 hours at 70 degrees C, and 30,000 Martindale abrasion cycles for the upholstery. The chair is well suited to designer lounges, hotel lobbies, executive waiting zones, and showrooms where the seating form contributes to the interior composition. It also works in residential living rooms, reading corners, and bedroom lounge areas, particularly on hard or polished floors where the integrated protective glides help preserve floor surfaces. Procurement planning should note the unbranded model LCH-SCULPT-760-WAL-WHT is supplied as one set across two cartons, with a packaged gross weight of 23 kg and carton volume of 0.26 cubic meters per set. Reference assembly time is listed as 40 minutes per set, while the product assembly-time field notes 15 minutes. Buyers should review finish, upholstery type, cushion replacement access, delivery packaging, and floor-contact requirements before specifying the chair for commercial or residential projects.

Sculptural Walnut Plywood Lounge Chair with White Upholstered Pads Specifications

Suppliers and stock